Problems with the maximum number of items on a page boundary?

Similar Questions

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• I have reached the maximum number of items in my calendar?

  What is the maximum number of items I can have in the timeline? I think I have some 92 items now and when try to add another element appears at the top of Control Panel items, it is not appear at all in the timeline?

  I tried to convert some elements to symbols or grouping elements, but still the new item that I added to the scene does not appear in the timeline panel. I'm not EVEN done the addition of several elements. What to do now?

  I just added 115 icons, as a test, and they appear fine (chronology).

  I'm not aware of any number of limitation, so I hope that a member of the dev can answer that.

  One thing to check, at the bottom left of the Timeline panel are three icons. The first is a toggle option "Filter". Ensure that it is not "deleted" / on as he said once on the timeline only show items that have applied animations/transitions.

  HTH

  Darrell

• Problem with the serial number and to purchase

  I have the problem with the reception of the letter with code or serial number. I bought a month ago creative cloud for the photographer and the payment made. A letter of confirmation. but still now series or code. Please help me with this

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  .

  On this computer, your cloud subscription correctly displays on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• How to choose the maximum number of items for DMA FIFO to the R series FPGA

  Greetings!

  I'm working on a project with card PCIe-7842R-R series FPGA of NOR. I use to achieve the fast data transfer target-to-host DMA FIFO. And to minimize overhead costs, I would make the size of the FIFO as large as possible. According to the manual, 7842R a 1728 KB (216KO) integrated block of RAM, 108 000 I16 FIFOs items available in theory (1 728 000 / 16). However the FPGA had compilation error when I asked this amount of items. I checked the manual and searched online but could not find the reason. Can someone please explain? And in general, what is the maximum size of the FIFO given the size of the block of RAM?

  Thank you!

  Hey iron_curtain,

  You are right that the movement of large blocks of data can lead to a more efficient use of the bus, but it certainly isn't the most important factor here. Assuming of course that the FIFO on the FPGA is large enough to avoid overflowing, I expect the dominant factor to the size of reading on the host. In general, larger and reads as follows on the host drive to improve throughput, up to the speed of the bus. This is because as FIFO. Read is a relatively expensive operation software, so it is advantageous to fewer calls for the same amount of data.

  Note that your call to the FIFO. Read the largest host buffer should be. Depending on your application, you may be several times larger than the size of reading. You can set the size of the buffer with the FIFO. Configure the node.

  http://zone.NI.com/reference/en-XX/help/371599H-01/lvfpgaconcepts/fpga_dma_how_it_works/ explains the different buffers involved. It is important to note that the DMA engine moves data asynchronously read/write on the host nodes and FPGAs.

  Let me know if you have any questions about all of this.

  Sebastian

• Did anyone else had problems with the serial number below MyAdobe does not?

  Try to re - install CS4 to work on something, and when I downloaded the installer and unpacked, it rejected the serial number on my page MyAdobe to the CS4 Master collection. Is there another number somewhere I should be entered or something?

  IF you are sure that you download the correct suite, you must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are links to a page with options to help make contact:

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  http://Adobe.LY/1aYjbSC

• Invalid code redemption after problems with the serial number.

  I was somehow began with two cats today in dealing with this problem.  I have all new software to Lightroom which was given to me as a gift.  I inserted the disc and downloaded on my computer, went to retrieve my serial number and that's when the problem started.  I got my redemption code, got my serial number, you click on the option 'Download', an error window emerged saying "the Web page could not be loaded at this time" and when I went back to get the serial number (press arrow to the left), he had disappeared.  It now has an invalid redemption code.  Help!  How can I use my software, get my serial number or get a new serial number?

  http://helpx.Adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-FAQ.html

• Problem with the version number - help please.

  Hello, my Avast reports that my Skype is outdated and must be updated with the latest version, (7.8.0.102), but when I goto Skype help and updates, Skype says I have the latest version already installed (7.7.64.103), what happens here, can someone explain the discrepancy PLEASE?

  Cheers from TekyTek

  For later use, download (download Skype) on this site section, allways will give you the installer for the latest version (7.8 in this case) when available, even if your ' check for update ' tell you that you have the latest version.

  Just make the file skypesetup right click and select Properties, the details tab will tell you which version the Downloader is for (or in the case of a complete configuration file, what version it is).

• problem with the slide show running javascript on a page that uses an inclusion

  Hi all

  I'm new to PHP, and if this is the wrong forum to post, if you would redirect me please, I would be grateful.

  I have a file that I call menu.php.  Inside this file, I have a menu accordion based on jQuery.  It works very well. I use an inclusion in another page, called "chair.php." As a first step, the menu jQuery works very well in the chair.php page, and I use <? PHP include ("menu.php");? >.  However, I'm running problems when I try to add a jQuery slideshow called 'pikachoose' in the chair.php page.  It seems that the slideshow cannot work properly if the menu is there...

  The code in the head for the "menu.php" tags is as follows:

  < head >

  " < script type =" text/javascript"src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "> < / script > .

  < link rel = "stylesheet" href = "css/960_12_col.css" type = "text/css" media = "screen" / > < / script > "

  < script type = "text/javascript" src = "js/menu.js" > < / script >

  < / head >

  The code used in the head (and some of the body) of tags in the chair.php is as follows:

  < head >

  < link type = "text/css" href = "reg/bottom.css" rel = "stylesheet" / > "

  < link type = "text/css" href = "css/960_12_col.css" rel = "stylesheet" / > "

  " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "type =" text/javascript"> "

  < /script >

  "< script type =" text/javascript"src="reg/jquery.pikachoose.js "> < / script >

  < script language = "javascript" >

  ($(document) .ready)

  function () {}

  $("#pikame"). PikaChoose({carousel:true});)

  });

  < /script >

  < / head >

  < body >

  <? PHP include ("menu.php");? >

  etc etc.

  < / body

  < / html >

  With the inclusion, the slideshow shows just like a series of images in a list.  When I remove understand it and keep all the same code, the slideshow works as it should.

  Is there a reason why the pikachoose slideshow cannot run the menu.php SEO include is in place?

  Thank you

  Rachel

  Sorry... I got it.  I had to remove the library jQuery from the menu.php file.

• Problem with the installation of 12 items!

  Hello

  I just bought the new Adobe Photoshop elements 12 and I have a few installation questions.

  So I just bought the CD version of 12 items on Amazon and I just found out that my new laptop doesn't have an optical drive for CD. Is there anyway to download it and install it on my laptop?

  Second, how many computers can I install it on (I have a computer to work, home computer and a notebook that I hang out with).

  Thank you very much!

  Download the trial version and enter your serial number in it.

• Problem with the license number

  Hello

  I bought Edesign CS2 on June 2006. I can't really active with your protocol.

  Can you please give me to option for activ it?.

  Thank you

  My serail number is: 1131-1284-9501-5885-5995-3536

  Elvire Emmanuel

  Are you referring to InDesign CS 2?

  If so, please see link below:

  ml https://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.HT

• Problem with the serial number upgade

  I had to reformat the HD.  I try to intall CSS5 Createiv suite 5.5 premium update, but the Basic program belonging is CS3.  The look of SN back in the 5.5 product has only CS4 products listed, the CS4 product is also a high grade, how can I get the SN of looking back at the base of CS3 product or do I install from the CS3 and CS5?

  We have three SN for the 5.5 product.

  our order number is AD004083209

  You only need the last qualifying series, which is your number of CS4. Everything should work perfectly and there is no need to go back as far as CS3.

  Mylenium

• Flex 3 - problem with the selection of an item in the list by default

  How to select an item in the list by default

  default selected item say to index 0

  I tried to stuff like that-

  listid.selectedIndex = somevalueinmyprogram - 1; 0

  but when I debug what I get
  _selectedIndex = 0 selectedIndex = - 1

  and by default is not selected, why so? [I already checked for what is obvious that somevaluefrommyprogram is not equal to 0]

  Help!

  It's a timing issue, as I told you before. As you know flex applications run in Flash Player, and FP works asynchronously, so what happens, is that when you try to put in place the selectedIndex property data is not yet in the dataProvider. What you can do is use the handleCentersListResult and inside of this function the selectedIndex value after completing centersXLC

• What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data?

  What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data? I'm incorporating data of the bar code under a button field. But when the data is large, the problem occurs.

  Apparently the theoretical capacity of the PDF417 barcode is 1850 characters or numbers in 2710. Of course, the actual capacity depends on the size - more square inches, more data. But before the theoretical limit, that you can reach practical limits in scanning technology so test carefully with all models of planned barcode scanner.