Problems with the option in the corners

Similar Questions

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• I had a few problems with the search engines and history

  My default search warning back to Yahoo after a reset on my computer. Close Firefox keep one to change but by restarting the computer, it takes.

  I can't open the sidebar history. The option "view the history of your" opens its tab fine (the drop-down menu that says 'Show History Sidebar', 'clear recent history... ("ect.). But, when you click on the "Show History Sidebar", nothing comes. Can I use the "Show history" option, but the sidebar does not open for some reason any.

  I just finished with a complete analysis of the Microsoft Safety Scanner and it said not that there is anything wrong. I have not reset the computer again to see if something has changed although after the factory reset (see the 2nd paragraph) it seems returned to Yahoo (search engine he kept going to happen).

  I open the history tab in the menu of the toolbar, and everything seems fine here. I also had him always use private off all first browsing mode. After activating the option clear history when Firefox closes, I ended up having to reset to factory settings (things he saves were saved isn't really a problem) that doesn't seem to fix the problem with the sidebar of history not to come.

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• Problem with the search function

  I use firefox 10 and I have a problem with the search feature. If the word that I will try to find begins with the capital letter I can't find with control function if I write the word only with small letters. a the opposite. For example, if the word is 'Letter' I can't find this word if I type 'letter' in the search bar

  Is the option 'Option match case' in the verified search bar? If so, uncheck it.

  • See-> https://support.mozilla.org/en-US/kb/Searching+within+a+page

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Satellite A300-1MZ - Smart tool recognize problems with the drive

  Hi all...
  I have a * a300-1mz * I * a problem with the hard drive *.

  [This | http://img96.imageshack.us/i/diskinfoe.jpg/] is the _screen to a s.m.a.r.t. pens (* Disc 3.3.0 * Info) who acknowledge some problems with the disk.

  Can I send the laptop as collateral for a free replacement of the same disc?

  Among other things, sometimes * the computer freezes * no option to manually turn off the laptop (I think it always comes from the same disk):
  the screen stays fixed and 'Win Vista' does nothing comands.
  same "ctrl + alt + delete" Task Manager does not. The disc indicator light remains lit, but itself no longer believes it works

  Hello

  > Can I send the laptop as collateral for a free replacement of the same disc?
  If the authorized service provider can notice this problem too, you can get a new HARD drive for free. The ASP will order it and swap it out. It is a free procedure if your laptop is under warranty.

  > sometimes the computer crashes
  The HARD drive is perhaps the reason for this?
  Contact a service provider authorized giving them all the details and information. They can fix that also. :)

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problem with the HP G62 recovery disks

  Hello

  I'm having a problem with the restoration of the operating system on your laptop HP G-62. When I first bought the laptop, I was unable to make the recovery discs, so I ordered recently a few new HP. Because I have installed Ubuntu on the laptop, I wiped it from the disk hard drive used Wipedrive to remove the old Ubuntu operating system I had installed.

  Laptop computer reads the first disc ok and installs the component of windows, but when the screen lights up asking the two disc number it freezes and never installs anything when you try to move anything that used to screen it doesn't matter what and he used to install the second disk. He repeats just 'Please wait '.

  Thank you, Robert

  Hi, Robert:

  I can't help you get the recovery disks to work, but if you can read all 25 characters of the product key 7 windows on the bottom of your PC, you can do your own installation disc 7 windows to reinstall the operating system.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Satellite C660D - a problem with the cooling system has been detected

  My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

  I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

  I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

  Please help quickly, this prevents me from working and even other things now.

  Thank you

  Hello

  Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

  But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

• Windows has encountered a problem with the DVD/CD on Qosmio G20

  has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
  can someone tell me what is happening.
  Thank you

  On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

  If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

  Good bye