Problems with the PDF any bit depth

Similar Questions

• Problem with the PDF in Acrobat 6.0 on windons printer 8

  I use the acrobat PDF writer.  I got a PC running Windows XP that is dead and the new PC is windows 8 (no available xp).

  The s/w I have is Acrobat 6.0 standard he had problems w / compatibility with whom I chose to load in any case.

  There were 3 mistakes all the same warning 20225 A Acrobat 6.0 Installation cannot create Adobr Port Monitor PDF, the PDF printer can be unavailablr.

  And it is.

  Downstairs, I loaded and installed updates

  Ac60BaP1 and Acro - Reader_6.0.2_Update

  Still the question.

  Can you help me?

  Y at - it a copy of 6.0 that would work I could download and use my license key on the drive I have.

  The customer service could not only help upgrades to 9.0 and did not question

  I just need the PDF writer in fact for my impression of curriculum vitae, currently unemployed made redundant so money is tight.

  -Kevin

  Hey Kevin,

  Acrobat 6 is not compatible with Windows 8. Please get the latest version of Acrobat 11.

  I recommend buying a monthly subscription for Acrobat which is available at a very low price.

• Problems with the pdf writer,

  When I print to pdf, the program does not work.

  Have tried to update the standard XI.

  Get a report:

  Can not read the Adobe PDF settings file in:

  C:\ProgramData\Adobe\Adobe PDF\Settings\Standard.joboptions

  Hi Jan,

  I recommend you check this wire: Adobe PDF error reading settings file in: C:\ProgramData\Adobe\Adobe PDF\Settings\Standard.joboptions and try the solution on this thread. Please let me know if you face any problem.

  Kind regards
  Rahul

• Problem with the pdf export: text box becomes visible

  When I export to pdf format, sometimes a text box lines become visible. In Indesign, I put them in transparent, so you don't see them here. But after an export to PDF, they are visible in the form of thin white lines. I tried to export to EPS and also here it gives white lines: the borders of a text box. Seems not all the text boxes. But sometimes one or two.

  So let me assure you... it will DESTROY the quality.

  Bob

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• problem with report PDF

  Hello world
  
  I have the problem with the pdf extension in my report
  all other extensions works very well except pdf :)
  I got this error
  java.lang.StringIndexOutOfBoundsException: String index out of range: 54
  at java.lang.String.substring (unknown Source)
  at oracle.apps.xdo.svg.obj.SVGText.getRealTranscodedObject (unknown Source)
  at oracle.apps.xdo.generator.pdf.PDFGenerator.drawSVGObjects (unknown Source)
  at oracle.apps.xdo.generator.pdf.PDFGenerator.drawSVGObjects (unknown Source)
  at oracle.apps.xdo.generator.pdf.PDFGenerator.drawSVG (unknown Source)
  at oracle.apps.xdo.generator.ProxyStreamGenerator.drawSVG (unknown Source)
  at oracle.apps.xdo.template.fo.area.InstreamForeignObjectArea.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.area.LineArea.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.area.BlockArea.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.area.RegionArea.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.area.PageArea.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.area.AreaTree.doOutput (unknown Source)
  at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout (unknown Source)
  at oracle.apps.xdo.template.fo.elements.FormattingEngine.run (unknown Source)
  at oracle.apps.xdo.template.fo.FOHandler.endElement (unknown Source)
  to oracle.apps.xdo.common.xml.XSLTHandler$ EEEntry.sendEvent (unknown Source)
  at oracle.apps.xdo.common.xml.XSLTMerger.startElement (unknown Source)
  at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
  at oracle.apps.xdo.template.fo.FOProcessingEngine.process (unknown Source)
  at oracle.apps.xdo.template.FOProcessor.generate (unknown Source)
  at RTF2PDF.runRTFto (RTF2PDF.java:629)
  at RTF2PDF.runXDO (RTF2PDF.java:439)
  at RTF2PDF.main (RTF2PDF.java:289)
  
  any openion?
  
  BR,
  Alaa

  Hello

  Looks like its trying to make something that becomes larger than the page size. try to comment on any table / image that can be the cause of this, in order to eliminate it as a possibility.

  -Karine

• Problem with report PDF - external (Apache FOP) - APEX 5.0 + ADR 3.0 + Tomcat 7

  Hello

  I have a problem with the pdf reports.

  I tried to make the steps of Apache FOP missing Oracle Apex installable for 5.0 and 5.0.1 APEX APEX

  It's something wrong with my settings 'external (Apache FOP)'.

  When I download the report I .pdf file.

  I can't open this file with the reader of pdf, but Notepad ++ open it.

  In the first line is: "ORA-20001: the print engine could not be reached because the URL is incorrect or a proxy URL must be specified."

  I have:

  • APEX 5.0 (c:\apex)
  • ADR 3.0.1 (c:\OracleREST-
    • files apex.xml, apex_al.xml, apex_pu.xml and apex_rt.xml are in C:\OracleREST\pathtoconfig\apex\conf,
    • defaults.XML, fop.xml are C:\OracleREST\pathtoconfig\apex)
  • Apache Tomcat 7.0.64 (C:\apache-tomcat-7.0.64)
  • Apache FOP 2.0 (C:\ApacheFOP\fop-2.0) - I don't now how to bind with APEX, ADR and Tomcat

  My fop2pdf.jar file is located in C:\apache-tomcat-7.0.64\webapps\apex\WEB-INF\lib

  If I use ADR as print server is OK, but I need to use non-English characters.

  Can you help me? Please

  AGM

  P.S. I'm sorry for my English, I hope you understand me

  Hi AgaSz,

  AgaSz wrote:

  I have a problem with the pdf reports.

  I tried to make the steps of Apache FOP missing Oracle Apex installable for 5.0 and 5.0.1 APEX APEX

  It's something wrong with my settings 'external (Apache FOP)'.

  When I download the report I .pdf file.

  I can't open this file with the reader of pdf, but Notepad ++ open it.

  In the first line is: "ORA-20001: the print engine could not be reached because the URL is incorrect or a proxy URL must be specified."

  You use DB Oracle 11g or later? If so, you must enable Network Services to use the configured Print Services.

  Reference: The last point mentioned here: PDF of print on demand Express 3.1 and above

  My fop2pdf.jar file is located in C:\apache-tomcat-7.0.64\webapps\apex\WEB-INF\lib

  If I use ADR as print server is OK, but I need to use non-English characters.

  You should not use "External Apache FOP", but you can "Oracle REST Data Services" as an option "print server". But, you should open the ords.war file and replace the Apache FOP associated jar files so that it supports non-English characters.

  You crossed the aforementioned following threads in the thread:

  Recently, I met the following threads:

  • Re: ADR and Arabic characters
  • Re: How to make a PDF output with template (layout)?

  3. ASK : if I agree that Apache FOP comes with ADR supports the Base-14 fonts and it's more issue ADR as Oracle APEX, but it will help you qualify for Oracle APEX + ADR as users of at least the next version ADR print server comes with Apache FOP 1.1 and the xmlgraphics - commons-1.5.jar. This will help the people setting up fonts and support for complex Scripts for example, Arabic, Hebrew, hindi and Southeast Asian scripts using Apache FOP comes with ADR as "print server".

  Kind regards

  Kiran

• Problems with the Speedgrade color depth

  Hello everyone!

  As said in the title I have problems with the number of colors in Adobe Speedgrade.

  I would like to color - correct images my drone DJI using LUTs and, of course, build-in Speedgrade tools.

  Unfortunately, the use of the LUTs makes video appearance as there are not enough color-depth because you can see the bands in gradients (especially in the sky).

  I hope you can see the problem in the following screenshot.

  Scratches appear in Speedgrade preview, as well as in video rendering.

  So what can I do to avoid this scratches?

  Thank you in advance!

  Greetings

  Raphael

  

  I have not bought any of the first LUT game I bought... 4 years back, now. Wow, how time flies...

  Why?

  Because I had problems with excerpts from tapes and rarely found one I liked "such what ', so I got to work the clip after you apply the LUT as much as if I started from scratch. So why pay for the dang thing?

  I found it a good common sense many people in publishing & work of colorist, there is a certain tech LUT can really be able to use, but those who are mainly for the spendy 'pro' movie, Reds, Arris and other cameras. For a film DSLR & drone, making its own tends to work MUCH better.

  And it is easy within the Sg.

  Take this clip... watch your litters, first. Move the slider Temp for the position that balances the red & blue tops, cursor Magenta to balance the red & green tops... then left offset slider far a channel can be a little below '0', 0 to sentence above and one a little higher... then with keyboard and mouse or a simple trackball, move the color slider controls rather than wheels "unlock" the trio Offset, match the bottom just above 0, reset the summits if necessary and then return to wheels.

  Move the controls in Gamma Luma needed to feel 'brightness', and you have a a neutralized clip. Shouldn't take more than 20 seconds to do the above, if that.

  Now using color wheels, started working for a 'vision' and of course use secondary as necessary to adjust certain colors/colours/brightness and maybe go to controls Shadow & Highlight to get finer control of two Luma and chroma on the edges... in general, it is best to bring the ends of the scale to neutral even with a look hot or cold for most of the signal.

  Get something you like and can be used for a large number of your clips, save it as an eye. You can just quickly apply to any other work.

  You want to use in PrPro? Easy... with the right button on the Look to the Sg, choose 'Export', and you get to the options... except that say a Cube of however many points you want to and tell him where to save it. I found that with my GH3, sometimes with work in the open air with a sky bright-ish with the Sun around but just outside of an edge banding is quite possible... and 'hand-kitchen' these clips or using a Cube 64 - point is necessary.

  Neil

• Problems with the links/e-mail addresses when viewing the PDF in the browser ONLY

  Hello

  I just sent a PDF with an email address in.  There seems to be a strange problem: If the pdf file is downloaded and watched in Adobe Reader, links mailto behind text messaging addresses work as usual (for example. [email protected]). However, when this pdf is displayed directly in the browser (Chrome on Windows 7) by using the built in pdf viewer all double letters in the mailto is deleted (for example. [email protected]), but the text itself remains unchanged.

  There are two examples of that in both cases, the two double letters.

  I just tried a test with ' [email protected] ' as the test address.  Once again, the mailto link shows as "mailto: [email protected]'.»»  Remove the first double letter, but keeping the second!

  Any suggestions?

  Thank you

  Matthew

  Sorry, you will need to file a complaint with Google on this subject; Adobe has nothing to do with the viewer of PDF of Chrome.

  Or configure Chrome to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Problem with the display of Adobe PDF documents

  Problem with the display of Adobe PDF documents

  I have a Windows 7 Home Premium computer

  I read all the suggestions and I tried to download several versions of Adobe Reader for Windows 7 and Vista http://get.adobe.com/reader/otherversions/.

  Before you download each version, I would delete the current version with uninstalling programs for the control panel.

  After each new installation I shut down the computer and restart the computer.

  I tried to download the versions with and without going through my antivirus (CA Total defense) running.

  After downloading, I thought that the version downloaded successfully.

  I have read the help of Acrobat http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.

  None of the above helped.

  The problem is that any version of Adobe Reader, download, I can't open a PDF file and read it. Or the drive itself will remain open.

  1. If I try to open the drive from the desktop link or real program menu, the Player opens for 5 seconds and then closes spontaneously. If I try to click on the Player menu (File, Edit, View, window, help, tools), then an alarm will sound and the menu does not open. Soon after, the reader is closed.

  2. If I try to open the drive by double clicking on a PDF file then the Player opens but the document is not displayed (only the grey player screen PDF is specified), then the drive closes after 5 seconds on its own.

  The desktop shortcut shows like 'red icon Adobe Reader'. But the real program menu icon shows as empty a folder icon.  All documents in PDF format displayed as Adobe PDF icon.

  I tested several PDF files and none will open on this computer, but they will open on other computers.

  I created a word document and saved as a PDF file. It looked as if it had record properly (a the appropriate icon) but when I try to open it according to point 2 above the document is not displayed and then then the drive closes after 5 seconds on its own.

  Anyone have any ideas on what is happening and how can I fix?

  Could you please respond in this forum and send me an email at [deleted]

  I'm so confused and frustrated.

  I would try Windows Explorer, navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement

• Problems with the OAS 10 g x 86 with Oracle database 64-bit

  Are there issues or problems with running on 64-bit Red Hat 4 AES, Oracle Application Server x 86 and x 64 Oracle database?
  
  Published by: Mika_ on June 22, 2010 08:22

  Our data base are all the 64-bit and 32-bit application servers.

  Going on 9 months without any known because of this problem.

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• Problem with the microsoft lifecam vx-5000 appication on my windows xp 32-bit

  I recently bought the lifecam vx-5000 and installed the software from the cd provided in the box. The webcam application fails and cannot open. It says that an error has occurred and must be closed. Also, the webcam is not detectable by Skype. I've download the latest version of the software (for my windows xp 32-bit) on the site but the problem still exists. What's not?

  Hello

  Looks like the camera might have a hardware problem or something running is interfering with
  the software and drivers.

  LifeCam VX-5000 - 3 year warranty
  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=014&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  and
  http://www.Microsoft.com/hardware/en-us/support

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ===========

  Also check with Skype and Forums support for known issues with their programs.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  ==============================================================

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.