Problems with the placement of two images

Similar Questions

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• Problem with the export of moving images always

  Hello.

  I would like to create a sequence where the film is made of still images (photos in.) Format PSD, reminiscent of an old Polaroid pictures) added motion.

  Now the problem is that after having made and export (DV, both interlaced and progressive format) these images in motion somehow bounce or jump on the edges, especially the inner white edge. No matter if I turn on or off the option "optimize images.

  I have attached a short excerpt, but it shows what I mean.

  The file is 1MiB, 5s, progressive, compressed with XviD with quantifier constant = 2, resized to 640 x 480.

  But all these changes to the exported file does not matter what so ever. It's the same thing with the first export.

  What should you do to improve the fluidity and smoothness of the film?

  I use Premiere Pro 1.5.

  It was quite interesting...

  Thank you all for this cool chain of messages...

  The last thing I did, is just now, I copied the image of Don in photoshop and checked the dimensions and so on...

  Then I opened a new file of the same size and pasted my image of Dani in the same space...

  Then I made a blur of the edges where the images meet at the border almost white.

  Any at first even Curt settings and even exported in a way...

  The earlier image of Dani, I've done was of different dimensions (not gift copy of what I did this time) but was imported and exported similarly suggestion of Curt (how he did his test)

  It was: import dv ntsc 720 x 480 29.97, predefined default...

  Export failing media mp4 encoder

  so, what I discovered (I think) the dimensions of the image of the gift (and my copy using Dani) need to be scaled down in the video black it causes jumpy sort things.  My previous trial of Dani, where the image was not reduced almost at all, does not seem to jump.  Everything else I did the same thing, the blur of the edges and so on... The only variable I see is the image size and the amount of scaling to a nice size of the screen.

  These two products demonstrates, in my view.

• Problem with the generation of two internal counters pulse trains

  Hello

  I do a control of temperature for two heaters, OR 9472 (output module digital), NI 9271 (RTD for measuring temperatures) and cDAQ-9174 chassis. So, I use the internal meter NI 9174 to generate two pulse train on the outputs (I tried with both cases-> pulse continuous and finite). Before that, I have two separate PID.vi, in which each sent the percentage of cycle of obligation for the two tasks of pulse generation (I configured these tasks with the physical channel cDAQ1Mod1/ctr0 and cDAQ1Mod1/ctr1). The problem is when I run the program, because the application initially worked fine, but after a few seconds the communication between the chassis and the application is not respected (no error message, but the external LEDs on the NI 9472 module had been disabled and stopped too NI 9271 module temperature readings). Then I tried to stop it with a 'Stop' button, but nothing happens. After, I abandoned the race and still nothing happened. So, I finished the Labview program with the Task Manager and a message appeared "reset VI: xxxxx". Finally, I have to restart my computer to run the program again. Can anyone help with this please? If you need more information, let me know.

  Kind regards

  Hi Luis,.

  I have the error cluster connected. But I solved my problem in a different way. I don't know why, but when I configured my RTD module with the DAQ assistant to test some of my design in a new file in VI, the RTD module works fine, but if I copy the entire program logic (include my DAQ assistant) back to my main VI folder and run the application, only for communication between my DAQ hardware and my software works there shortly. So I solved my problem set up any device or module in the same file from the application again and problem disappears.

  Thanks for your help.

  Luis C.

• problems with the placement of dynamic stamps on javascript

  I can place a stamp with:

  this.addAnnot ({page: this.pageNum, type: 'Stamp', AP: 'Project', rect:[144,72,144,72]});})

  everything works fine, but if I change the static a dynamic stamp stamp (for example, approved with name and date), I only get a black rectangle with a cross inside.

  I checked the name of stamp to choose the right pair. As I said before with static stamps without problem.

  I use the XI Version of Acrobat 11.0.11

  Any hint of what goes wrong?

  Thomas

  This occurs when you use the wrong value of AP, which is not the same as the name of the stamp you see in the stamps palette.

  The best way to get the correct value of AP is to apply the patch manually, then select it with the mouse and run this code in the console:

  this.selectedAnnots [0]. AP

  Then use the value that is printed in your code.

• Problem with the placement of layer 3D Ray Trace

  I have problems with this ORB. I want it revolve around the ferret, as it seems to be made up display on the right, but when it is in the camera activates, it remains before the ferret. If I place the ORB layer below the layer of ferret, so everything is behind the ferret. I can't surround around well. Any ideas on how to get this to work? I work in Raytraced 3D.

  I am running After Effects on mac osx 10.7.4 11.0.1.12 CS6.

  

  Edit: To give more information, the orb is a CC Particle World with a glow effect.

  So here is what I found that worked. I took the extruded ferret and the movement of the camera and pre-comp had, he fell into a new comp, he made a 3D layer, then put my particle effect in and using the obstructing layer as you suggest, I could successfully create the scene that I was going to. He also spead to the top the overview and updates LiveUpdate considerably.  I also used a mask to make smaller ferret model, although I don't know if that actually does something.

  Thanks ShiftHorizon for suggesting particular and thanks Mylenium for obfuscation layer!

• Problems with the placement of PDFs in CS4

  I recently upgraded to CS4. I'm having a problem when I place a pdf in indesign CS4. When I place the PDF changes the size of the pdf file. For example, I'm trying to put a pdf file which is in 3.5 by 4.75 in. When I place it in CS3 it keeps the same size. When I put in CS4, it changes the size of 4.515 in by in 6,125. I looked at the preferences options import. I have searched for it and I can't understand how to solve this problem.

  Image by placing the behavior has undergone a radical change between CS3 and CS4. In CS4 when you click and drag a slider to place the image will evolve to adapt to the resulting image. If you click on and release, it will be set to 100%. If you put in an existing framework, it will come in according to the options of adjustment applied to the frame.

• Problem with the placement of nav.

  I have three columns, or with the navigation centered at the top under the header, but for some reason bar any in Safari and IE navigation bar faces the color of the columns on the left and the right.  The code is below, no idea what I did wrong?  I tried to change the margins and padding, but without success.

  Thank you!

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml "> < head > .

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Radio Health Journal < /title >

  < style type = "text/css" >

  <!--

  {body

  fonts: 100% Verdana, Arial, Helvetica, without serif.

  background: #FFF;

  margin: 0; / * It is advisable to zero, the margin and the filling of the body to hold element has a different default browser * /.

  padding: 0;

  text-align: center; / * This centers the container in IE 5 * browsers. The text is then set left aligned by default in the #container selector * /.

  color: #000000;

  }

  / * Tips for Elastic layouts

  1. Since the elastic layouts overall size is based on the user's default font size, they are more unpredictable. Used correctly, they are also more accessible for those who need larger fonts given the length of the line remains proportionate.

  2. sizing of the divs in this provision are based on 100% font size in the body element. If you decrease the overall size of the text by using a font size: 80% on the body element or the #container, remember that the complete provision will reduce proportionally. You can increase the widths of the divs to compensate for this.

  3. If the sizing of fonts is changed in different quantities on each div instead of on the overall design (ie: #sidebar1 is a font size of 70% and #mainContent has a font size of 85%), this will change proportionally each of the overall size of divs. You can adjust the base on your final sizing of fonts.

  */

  .thrColElsHdr #container {}

  width: 65em;  / * This width will create a container that can fit in a 800px browser window if text is left to default browser font sizes * /.

  background: url #FFFFFF (.. / graphics/faux.gif) repeat-y;

  margin: 0 auto; / * margins (in conjunction with a width) auto Center the page * /.

  text-align: left; / * This setting overrides the text-align: center on the body element. */

  }

  .thrColElsHdr #header {}

  background: #FFF;

  padding: 0 10px;  / * This filling is the alignment to the left of the items in the div that appear below. If an image is used in the #header instead of text, you can remove the padding. */

  }

  .thrColElsHdr #header h1 {}

  margin: 0; / * zero setting of the margin of the last element in the #header div tag will prevent the collapse of margin - inexplicable space between divs. If the div has a border around it, this isn't necessary, which also allows to avoid the collapse of margin * /.

  padding: 10px 0; / * padding instead of margin will allow you to keep the edges of the div element * /.

  }

  / * Sidebar1″ tips:

  1 be aware that if you set a value for the font size on this div, the width of the div will be adjusted accordingly.

  2. as we work in ems, it is preferable not to use the filling in the sidebar itself. It will be added to the width for browsers compatible standards creating a real unknown width.

  3. the space between the wall of the div and the items it contains can be created by placing a margin left and right on these items as seen in the rule ".thrColElsHdr #sidebar1 p.

  */

  {.thrColElsHdr #sidebar1}

  float: left;

  width: 20em; / * because this element is floating, it takes a width * /.

  background: #3399FF; / * the background color will be displayed for the length of the content of the column, but no further * /.

  padding: 45px 0; / * upper and lower padding create a Visual space within this div * /.

  }

  {.thrColElsHdr #sidebar2}

  float: right;

  width: 20em; / * because this element is floating, it takes a width * /.

  background: #3399FF; / * the background color will be displayed for the length of the content of the column, but no further * /.

  padding: 45px 0; / * upper and lower padding create a Visual space within this div * /.

  }

  H3 .thrColElsHdr # sidebar1″, p.. thrColElsHdr # sidebar1″, .thrColElsHdr #sidebar2 .thrColElsHdr #sidebar2 h3 {}

  margin-left: 10px; / * the left and right margins should be to all of the items that will be placed in the side columns * /.

  margin-right: 10px;

  }

  / * MainContent tips:

  1. If you give this div #mainContent a value of different size of the div # sidebar1″, the margins of the #mainContent div will be based on the font size and the width of the div #sidebar1 depend on the size of the font. You can adjust the values of these divs.

  2. the space between the mainContent and sidebar1″ is created with the left on the mainContent div margin regardless of how content div the sidebar1″ contains, the space of the columns will remain. You can remove the left margin if you want the #mainContent div text to fill the space of #sidebar1 when the content of #sidebar1 is complete.

  3. to avoid falling of float, you may have to test to determine the size of the image/approximate maximum element because this provision is based on the calibration of fonts the user combined with the values that you set. However, if the user has their browser game lower than normal font size, less space will be available in the #mainContent div that you see on the test.

  4. in the Internet Explorer conditional comment below, the zoom property is used to give the mainContent "hasLayout". This avoids several specific IE bugs that may occur.

  */

  {.thrColElsHdr #mainContent

  margin: 20em 0 0 20em; / right margin can be given in pixels or ems. He created space on the right side of the page. */

  padding: 10px 45px;

  }

  .thrColElsHdr #footer {}

  padding: 0 10px; / * This filling is the alignment to the left of the items in the div that appear above him. */

  background: #FFFFFF;

  }

  .thrColElsHdr #footer p {}

  margin: 0; / * zero setting the margins of the first element in the footer will avoid the possibility of the collapse of the margin - a space between the div tags * /.

  padding: 10px 0; / * padding on that element will create space, just as it would the margin, free margin collapse question * /.

  }

  / * Various classes for reuse * /.

  .fltrt {/ * this class can be used to float right to the item in your page.} The floating element must precede the element it should be next to the page. */

  float: right;

  margin left: 8px;

  }

  .fltlft {/ * this class can be used to float an element on your page to the left * /}

  float: left;

  right margin: 8px;

  }

  .clearfloat {/ * this class must be placed on an element div or break and should be the last item before closing a container should completely contain a float * /}

  clear: both;

  height: 0;

  font size: 1px;

  line-height: 0px;

  }

  a: link {}

  color: #000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #000;

  }

  a: hover {}

  text-decoration: none;

  }

  a: active {}

  text-decoration: none;

  }

  {.navbar}

  fonts: more great Verdana, Arial, Helvetica, without serif.

  color: #000000;

  background: #FFFFFF;

  height: 20px;

  }

  #navbar ul {}

  margin: 0px;

  padding: 0px;

  list-style: none;

  text-align: center

  }

  #navbar ul li {}

  display: inline;

  }

  #navbar ul li a {}

  fonts: more great Verdana, Arial, Helvetica, without serif.

  color: #000000;

  text-decoration: none;

  padding: 10px 15px;

  float: none;

  }

  ->

  < / style >

  <!-[if IE] >

  < style type = "text/css" >

  / * place patches css for all versions of Internet Explorer in this conditional comment * /.

  .thrColElsHdr # sidebar1″, .thrColElsHdr #sidebar2 {padding-top: 30px ;}}

  .thrColElsHdr #mainContent {zoom: 1; padding-top: 15px ;}}

  / * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.

  < / style >

  <! [endif]--> < / head >

  < body class = "thrColElsHdr" >

  < div id = "container" >

  < div id = "header" >

  "" < p > < img src = "... width/graphic/Logo RHJ 1.JPG" = '195' height = '73' / > < / p >

  < div class = "navbar" id = "navbar" >

  < ul >

  < li > < a href = "#" > satisfy guests < /a > < /li >

  < li > < a href = "#" > links < /a > < /li >

  < li > < a href = "mailto: " [email protected] "> contact us < /a > < /li > .

  < /ul >

  < / div >

  <!-end #header--> < / div >

  < div id = "sidebar1″" >

  This week on Radio Health Journal < h3 > < / h3 >

  < p > Teenage Blues: is it anxiety or depression? Discover could save a life. < /p >

  < p > synesthesia: when the people & quot; See & quot; sounds or & quot; hear & quot; colors. < /p >

  < h3 > < / h3 >

  Top new health < h3 > today < / h3 >

  < p > the vitamins C and E allowed in fear melanoma < /p >

  the < p > older men often binge drinking, too < /p >

  < p > some children are psychologically OK < /p >

  < p > new drug for schizophrenia and bipolar disorder approved < /p >

  < p > Mediterranean diet and exercise reduces the risk of Alzheimer's disease < /p >

  < p > lack of sleep may increase the risk of diabetes < /p >

  < h3 > < / h3 >

  <!-end # sidebar1″--> < / div >

  < div id = 'sidebar2' >

  < h3 > Podcasts: depth, award-winning radio health Journal Reporting < / h3 >

  "" < p > < a href = "... /Secret Shoppers.mp3" target = "_blank" > medical mysteries: Fake patients who keep the quality of care high < /a > < /p >

  "" < p > < a href = "... / Pediatric Liver.mp3" target = "_blank" > Pediatric liver transplantation: children can receive a slice from a living donor adult < /a > < /p >

  "< p > < a href ="... And sale of Healthcare.mp3' target = '_blank' > selling health care reform: why revved rhetoric questions more facts < /a > < /p >

  "" < p > < a href = "... / Alzheimer's Disease Diagnosis.mp3" target = "_blank" > early diagnosis of Alzheimer's disease: the benefits of early treatment < /a > < /p >

  "" < p > < a href = "... / dementia drugs.mp3 ' target = '_blank' > dementia drugs: are too common drugs in nursing homes? < /a > < /p >

  < p > Pregorexia: anorexia while speakers more common than we think < /p >

  "" < p > < a href = "... / death cleanup.mp3 ' target = '_blank' > Mop men: people clean up after the unexpected death < /a > < /p >

  "" < p > < a href = '... / Gout.mp3 ' target = '_blank' > drop: the return of the 'disease of the King' < /a > < /p >

  < p > prevention and health reform: how much money can prevent really save? < /p >

  <!-end #sidebar2-> < / div >

  < div id = "mainContent" >

  < H3 > Featured Content < / h3 >

  " < p > < a href =" http://speakaboutbipolardepression.com/ "target ="_blank"> the economy causes many Americans to feel extra pressure.  This is particularly worrisome for Americans over the age of 8 million with bipolar disorder. < /a > < /p >

  " < p > < a href =" http://ALZ.org/index.asp "target ="_blank"> that modern medicine extends the life expectancy, the prevalence of Alzheimer's disease in the United States should skyrocket since about 5 1 million in 2050.  It is more important than ever to understand the risk factors. < /a > < /p >

  < p > you might thing a transfusion of blood that are prescribed by a physician would be safe and effective.  But a new analysis by an international panel of sbows majority of transfusions have few benefits.  In fact, they can be dangerous. < /p >

  < p > < / p >

  < h3 > customer information. < / h3 >

  " < p > < a href =" http://www.psychology.Emory.edu/clinical/westen/index.html "target ="_blank"> The sale of Healthcare Reform: Dr. Drew Westen, Professor of psychology and Psychiatry, Emory University and the author of < em > The Brain political: the role of emotion decided the fate of the Nation < /em > < /a > < /p > "

  " < p > < a href =" http://www.hschange.com/ "target ="_blank"> The sale of Healthcare Reform: Dr. Paul Ginsberg, President, Center for the study of change in health care < /a > < /p > "

  " < p > < a href =" http://www.stlouischildrens.org/content/ "target ="_blank"> Pediatric Liver Transplantation: transplant of Dr. Jeffrey Lowell, surgeon, hospital Saint-Louis for childhood < /a > < /p > "

  " < p > < a href =" http://www.ucityphila.org/news/release/340 "target ="_blank"> early diagnosis of Alzheimer's disease: Dr. Richard Stefanacci, Director, Institute for geriatric studies, University of Sciences < /a > < /p > "

  <!-end #mainContent--> < / div >

  <!-this element of compensation should immediately follow the #mainContent div in order to force the #container div to contain all the child floats--> < br class = 'clearfloat' / >

  < div id = "footer" >

  < p > < / p >

  <!-end #footer--> < / div >

  <!-end #container--> < / div >

  < / body >

  < / html >

  Oooops, I forgot, I also closed the header tag before the navigation bar...

  Gary

• problem with the transition and external image

  Hello! I have a little trouble with the transition to a new state that contains an external image. I want a titlewindow to resize when the user clicks on a button and view an external image. the size of the external image is unknown until it is loaded, so I put the widths/heights to 100%. However, the transition "resize" does not know the size of the image in time and comes alive in a small rectangle...
  
  I discovered how to solve this problem by deleting the passage and making the invisible titlewindow until the image is loaded (using the event 'complete'). Ideally, I would like to use the functionality of transition, however and am curious to know if anyone has any ideas on this point - perhaps triggering the resizing to start once the image is loaded? I can only find a way to display a transition through mxml - this can be achieved via actionscript?

  When you use States and there is a tag This means that the child will be added to the display list. The object already exists (a new operation has been made about it). It may not be in a fully realized State first because it has not been added to the display list and therefore his complete cycle of creating the Flex framework has not been executed.

  I haven't run the scenario I propose, so it might actually not, but I have another suggestion below.

  You should be able to have in the State that when you are ready to load the image, img.source = url; should not give you an error. The question is, without the image being added to the display list, try even to load image from url and trigger the complete event? If it does not trigger the complete event, then you can change the States there.

  My alternative is to not put the Image in the State, but leave it in your state of base with a width and a height of zero. Having the button set the source property of the image (or call the load() method). When the complete event triggers switch States.

  In your , instead of having an AddChild, you'll SetProperty. Something like this (width, height would be similar):

  Now, the transition must simply use the effect of .

• A problem with the placement of images

  I'm working on my profolio projects and superior finals. When I import a file that is located in high resolution, it seems blurry and pixelated after resizing with automatic adjustment. (When I resize using the AutoFit feature, I use shift.) Is that what I can do to fix this problem? I don't want to redo the project.

  Click the object, and then select object / editing / adjust proportionally

  G

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• I'm having a problem with the decryption of incrypted images...

  I have a problem and I need help... kindly, if anyone knows solution tell me please... the problem is I have encrypted my file of my personal photos then my windows has been corrupted and I installed the new window, but now I can not access these images... kindly if anyone knows how to decipher please tell them me...

  M

  If you used the built in encryption no..  A good reason not to use encryption ever.

• problem with the transparency of PNG images on evolution

  I'm trying to display a picture of *.png with transparency. If I create a bitmap of it field, it displays well with transparency.

  But if I resized the image and the screen then using BitmapField, the black of displays of transparent areas.

  Does anyone have any idea on this?

  I recommend that looking for before you post a question.  This question has been asked and answered a few times already.

  Here is the solution:

  http://supportforums.BlackBerry.com/T5/Java-development/resizing-transparent-bitmaps/Ta-p/703239

• Problems with the formatting on two different servers?

  Hi all, I hav a report run very well in dev server, but when I propose to prod, put it is to have some formatting problems.
  
  Spaces (lines) additional appear in output document.even thogh I use the same rtf model.
  
  I checked the xml data.
  
  I compared the two data xml files. (dev server, server prod)
  
  
  I could see that in the dev file,
  
  rowset <>
  < ROW >
  < > 142 sort_order < / sort_order >
  < name > DMMTBNACAD < / name >
  < name_desc > MMT MM < / name_desc >
  < feat_amount > 0.95 < / feat_amount >
  loans of < bis_name > < / bis_name >
  < p_desc > < / p_desc > < p_desc2 >$ 3.5 avg. < / p_desc2 > < v_p_desc > < / v_p_desc > < p_sec_desc > < / p_sec_desc > < p_sec_desc2 > < / p_sec_desc2 > < sec_name > M M < / sec_name >
  < / ROW >
  < / LINES >
  
  
  
  
  
  In the new file: I have elements in this way.
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  rowset <>
  < ROW >
  < > 142 sort_order < / sort_order >
  < name > DMMTBNACAD < / name >
  < name_desc > MMT MM < / name_desc >
  < feat_amount > 0.95 < / feat_amount >
  loans of < bis_name > < / bis_name >
  < p_desc >
  < / p_desc >
  < p_desc2 >
  $3.5 avg; < / p_desc2 >
  < v_p_desc >
  < / v_p_desc >
  < p_sec_desc >
  < / p_sec_desc >
  < p_sec_desc2 >
  < / p_sec_desc2 >
  < sec_name > M M < / sec_name >
  < / ROW >
  < / LINES >
  
  
  so, I removed the spaces in the new prod xml and makes it look like an old man and then tried for small amt of data. It seemed to work then.
  How to get back on that?

  I also think that it is a problem of data.
  If one space is your question as a solution, you can use this code so that it truncates spaces.
  

• Problem with the creation of two movieclips

  Hello

  I am trying to create two movieclips and two textfeilds with ACE the clip are also movable. So here's my code:

  
  this.createEmptyMovieClip("text1_mc",1);
  
  _root.text1_mc.createTextField("text1",1,0,0,100,100);
  
  _root.text1_mc.Text1.text = "A";
  
  text1_mc.onPress = function() {}
  startDrag (this);
  }
  text1_mc.onRelease = function() {}
  stopDrag();
  }
  
  this.createEmptyMovieClip("text2_mc",1);
  
  _root.text2_mc.createTextField("text2",2,0,0,100,100);
  
  _root.text2_mc. Text2.text = "B";
  
  text2_mc.onPress = function() {}
  startDrag (this);
  }
  text2_mc.onRelease = function() {}
  stopDrag();
  }

  But it only show the last move clip created and the text (Text2) then why dosen't he not show us of A and B?

  .

  this.createEmptyMovieClip("text2_mc",2);