Problems with the formatting on two different servers?

Similar Questions

• Strange problem with the formatting of the text

  Hello

  I had a strange problem with the formatting of the text. I created a document in Polish language and the strange thing happens when it divides the word to the next line. For example here on this part of the page, I have a word "umieszczamy", which should be divided "' u - CEF - szcza - my", but my Indesign divides in umi-eszczamy (as shown on the picture). " How can I fix it so it divides the word correctly?

  Concerning

  

  What language is awarded when you select the text? Hyphenation, but also the spelling, is controlled by the dictionary that is assigned to the text.

  If the language is correct, you might have to change the hyphenation in the user dictionary.

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• Problem with the generation of two internal counters pulse trains

  Hello

  I do a control of temperature for two heaters, OR 9472 (output module digital), NI 9271 (RTD for measuring temperatures) and cDAQ-9174 chassis. So, I use the internal meter NI 9174 to generate two pulse train on the outputs (I tried with both cases-> pulse continuous and finite). Before that, I have two separate PID.vi, in which each sent the percentage of cycle of obligation for the two tasks of pulse generation (I configured these tasks with the physical channel cDAQ1Mod1/ctr0 and cDAQ1Mod1/ctr1). The problem is when I run the program, because the application initially worked fine, but after a few seconds the communication between the chassis and the application is not respected (no error message, but the external LEDs on the NI 9472 module had been disabled and stopped too NI 9271 module temperature readings). Then I tried to stop it with a 'Stop' button, but nothing happens. After, I abandoned the race and still nothing happened. So, I finished the Labview program with the Task Manager and a message appeared "reset VI: xxxxx". Finally, I have to restart my computer to run the program again. Can anyone help with this please? If you need more information, let me know.

  Kind regards

  Hi Luis,.

  I have the error cluster connected. But I solved my problem in a different way. I don't know why, but when I configured my RTD module with the DAQ assistant to test some of my design in a new file in VI, the RTD module works fine, but if I copy the entire program logic (include my DAQ assistant) back to my main VI folder and run the application, only for communication between my DAQ hardware and my software works there shortly. So I solved my problem set up any device or module in the same file from the application again and problem disappears.

  Thanks for your help.

  Luis C.

• With the help of two different devices for VDR to save the same virtual machines

  Hello

  I have VDR backup right now most of my virtual machines. I'm experimenting with some recovery scenarios disaster using VDR. I want to set up a new device, backup virtual machines themselves, but with a destination off. My question is, it would cause problems to have two different devices, backup the same virtual machines?

  I'm asking this is because I was looking at the notes of recent VMworld session on VDR and he says, regarding a troubleshooting scenario in which you must create a new device in addition to your current device, both devices back up the same virtual machines do not.

  If it is dangerous to do so because of the likelihood that two devices can save the same virtual machines at the same time, I could schedule the backup windows at different times to avoid this problem.

  Anyone have any ideas?

  I create a second local camera vDR and vDR distance and test it against a test VM. The vDR devices will have their own CBT files for each virtual computer, so they should be able to work together, but I would like to go through tests to see how they work well on the WAN. Make sure that you can transfer enough data to host daily data change.

• Problem with the formats video pro update 2.0.4

  Hello

  I have a problem with FCPX that appeared after I installed that formats video pro update 2.0.4 (very probably related to this update because had no problem before it). Final assembly runs very slowly and when I try to quit smoking I get a message that says 'Cancellation tasks background' with a progress bar that never begins. I opened the window of background tasks and there is no background running task. Only force leaving the application closes.

  System specs are:

  FCPX version 10.1.4

  Mavericks OSX version 10.9.5

  MacBook Pro 15 "in early 2011, intel core i7 at 2 GHz, 8 GB of RAM"

  Any help would be massively appreciated! Thank you

  Start by removing the preferences. Press the command and option keys at startup and confirm.

• Problem with the format SmsAddress

  Hi all

  I have a problem with SmsAddress according to the format string

  This code does not work:

  String addr = "0101234567";

  DatagramConnection dgConn;
  dgConn = (DatagramConnection) Connector.open ("sms: / /" + addr);
  SmsAddress smsAddress = new SmsAddress ("/ /" + addr);

  If I replace the address to:

  String addr = '+ 20101234567';

  This works.

  If I did not need to write the full address with country code, so how can avoid this problem.

  I found a solution for sms, country code, but I don't know if there's bettet solution or not.

  This solution is based on the International Mobile Subscriber Identity (IMSI) and the   Mobile Country Code (MCC).

  We can get the IMSI in the API of SIM (SIMCardInfo) then the first three bytes as the MCC.

  The I get the sms country code of the lookup table in the site:

  http://mobilecountrycodes.com/

  Note: You must remove the zeros before concatinating the code with local mobile phone number.

• Problems with the formatting of a Style sheet

  I have problems with an article on my web page, your stay at the right size.  In addition, it appears differently for different browsers.  If you go to http://bakerlake50k.com/test.php you will see the intermediate base which is black appears well behind things in front of her.  It is either too long or too short. Secondly, I have to put in a paragraph in the main section breaks, white (section #content) or it displays longer than black background (not finding that one!).

  The third problem is that the dark gray (#pad) at the bottom (above the Red) does not align flush up to the black background above her.  Is there a way to solve these problems and have them stay fixed?

  Jeannette

  You are quite welcome.  Don't forget to mark as answer if it is indeed work well for you.

• Problems with the formatting of the dynamic text box

  I'm under the questions with the help of HTML formatting for a dynamic text field. I know these are weird and I can't understand how to get the formatting right.

  I have on my scene a dynamic text called «content_txt' inside a movie clip instance «content_mc» box When he enters the frame, I just broke down the "content_mc" of the alpha of 0 to 100 with a scenario animation. So that this works, I have to incorporate the police in my text field 'content_txt '. However, the only way I get get the HTML formatting to work is if I do not embed fonts.

  The dynamic text field is configured to render as HTML. In my layer actions, I put the text:

  this.content_mc.content_txt.htmlText = "<b>Hello world,</b> it is me again."

  In summary:

  1. If I do not embed fonts, the alpha fade does not work but HTML formatting doesn't.

  2. If I incorporate police, the alpha fade works but HTML formatting does not work.

  How to solve this? It's driving me crazy!

  then you're not g-d instructions.

  You should have two textfields.  the one on the boards that you started with and that incorporates your normal font (not bold).  and a slide that takes the same family of fonts with license "BOLD".  Repeat the test.

• problems with the format of paper (Spanish)

  Hola, mi problema're este.
  earlier era of en mi computadora no monitor 800 x 600 no tenia problema con el tamano. cqmbie the 1600 x 900 computadora y este are el problemahice una foto 8 x 10 inch, el problema cuando pongo impresion tamano are watching me en el sale Chico mas lo normal pero in the regla photoshop sale 8 x 10.
  Lo mido don't con una foto 6 x 8 as tengo y none are del mismo tamano Québec sale in el monitor none is that pasa, tender as mover algo adentro en photoshop
  Ayuda gracias Aa±ado foto

  http://i69.Photobucket.com/albums/i48/bottler/IMG_6205.jpg

  Windows 7

  You must understand the resolution of your screen in PPI and enter it in Edit-> preferences-> units & leadership in the field of the resolution of the screen and then use the view-> the size of the print command. To get the resolution of your screen in PPI, measure one side of your viewable area of your monitor, and then divide the number of pixels on this side (check the current resolution of your screen in pixels) with the length in pixels of this side of the screen. If you do not feel like to do everything can just use trial and error and enter different values in the field of the resolution of the screen until you get the right one. Here is a list of the comon screen resolutions, it should give you a good starting point for the approach of the trial & error: http://en.wikipedia.org/wiki/List_of_displays_by_pixel_density

• What is the problem with the format of this procedure

  on the page of the apex I displays a record based on the record number of user input. Now, I need to convert the process in a procedure.
  
  treat before heading in the apex:
  Select emp_id, emp_name in (: p1_emp_id,: p1_emp_name) of employees where emp_id =: p1_entered_id;
  
  
  
  
  My unsuccessful attempt of conversion:
  
  treat before heading in the apex:
  p_find_emp_data (p_emp_id = >: p1_emp_id,)
  p_emp_name = >: p1_emp_name,.
  p_entered = >: p1_entered_id);
  
  
  procedure:
  create or replace procedure P_find_emp_data
  (p_emp_id number,
  p_emp_name in varchar2,
  P_entered number)
  is
  Start
  Select emp_id, emp_name in: p_emp_id,: p_emp_name form employees where p_emp_id =: p_entered;
  end
  
  issues related to the:
  1. to help ' = > ' in a process call, this means match and assign the value? ex: p_emp_name will have p1_emp_name value\data. If Yes
  2. why the compiler of procedure do not like my select statement on: P_emp format, it's like I need to redefine the variables.
  
  Can you help me? It must be that I misinterpretate the ' = > ' but has not found this notation in doc. This notation was an employee now disappeared.
  
  Thanks in advance a lot.

  wanwan63,

  First of all, for notation, using the '=> '...

  Means what is pairs name / value. Using this, you can call your procedure with the parameters in any order that you like. Some examples of the appeal of your home with this notation.

  P_find_emp_data (p_emp_id => 1 , p_emp_name => 'DOUG', p_entered => 123232);
  p_find_emp_data(p_emp_name => 'DOUG', p_emp_id => 1, p_entered => 123232);
  

  Two of these calls are equivalent.

  Now, the reason why your selection... in does not work.

  You have all your settings specified as part of the definition, which means that they are used ONLY to pass information in the procedure.

  If you mark as IN OUT or OUT (depending on their use) you'll have better luck that of why, based on the code that you included, the signature of your procedure should be

  create or replace procedure P_find_emp_data
  (p_emp_id OUT number,
   p_emp_name OUT varchar2,
  P_entered IN number)
  is
  begin
  select emp_id,emp_name into p_emp_id, p_emp_name form employees where p_emp_id = p_entered;
  end;
  

  Also note that I removed the colon before the references to parameters. They are not needed, referring to the parameters of the procedure.

  Hope that helps,

  -Doug-

  http://sumnertech.com/

• problem with the format of the time and from 12:00 am

  I'm using Acrobat 9 Pro. I have a pdf document to fill out on-line that I fell through the wizard and then modify by using "Add or edit fields" under the menu "Forms." I have a text field where the time is recorded (hours, minutes and am or pm). I have it in the format hh: mm tt, but if I come back at midnight, it goes to 0:00 when I tab out of the field. I am not allowed to use military time. Any other time I entered does not cause it. Anyone know how I can fix this so that it remains 12: 00?

  I understand, it seems strange, but it's like that. I'll guide you through what you need to do.

  1. create a new JavaScript to the document level. With the document open, select: Advanced > Document Processing > Document JavaScripts

  and add a new one. You can call it what you want, for example "DateFormat." When you add a new, it provides you with a skeleton of the default function. Delete and copy and paste the following text:

  function TF2 (ptf) {}
  If (! event.value) {}
  return;
  }
  var date = AFParseTime (event.value, null);
  If (! date) {}
  Event.Value = "";
  return;
  }
  var cFormats = new Array ("HH: mm", "HH: mm tt", "HH", "SS tt");
  var time_string = util.printd (cFormats [MFP], date);
  var zerohour_re = / ^ 0: /;

  Event.Value = time_string.replace (zerohour_re, ' 12: "" ");
  }

  function TK2() {}

  AFTime_Keystroke ("h: mm tt");

  }

  2. then you need to change the date field and specify a custom type and Format script. On the Format tab, select a category of "Custom" and you will see where you can write the script.

  For the strike script, follow these steps:

  Typing script

  TK2();

  To Format the script, follow these steps:

  Script format

  TF2 (1);

  These what call the functions that you configured in the script at the level of the document that you created earlier. Post again if you have any questions.

  TF2 altered function simply replaces the characters "0:" with "12:" if at the beginning of the string in the form.

• Problem with the format of the external tables

  I am using the external Tables feature in Oracle.
  
  The code I am using currently to create my table is (I cut down the list of fields for clarity).

  create table EMP_EXTERNAL2
  (HIREDATE DATE )
  organization external
  ( default directory EXT_TABLES
  access parameters
  ( records delimited by newline
  fields terminated by ',')
  location ('EMP.CSV') )
  
  REJECT LIMIT 0
  ;

  But I get rejected folders when I select in the table due to the format of the HIRE date. The examples I've found suggest using a date format, change the code to:

  create table EMP_EXTERNAL2
  (HIREDATE DATE 'mm/dd/yyyy')
  organization external
  ( default directory EXT_TABLES
  access parameters
  ( records delimited by newline
  fields terminated by ',')
  location ('EMP.CSV') )
  
  REJECT LIMIT 0
  ;

  When I run this I get ORA-00907: lack the closing parenthesis. What I'm doing wrong here (I'm under the code in SQL Developer incidentally)?

  Hello

  Try this: -.

  create table EMP_EXTERNAL2
  (HIREDATE DATE )
  organization external
  ( default directory EXT_TABLES
  access parameters
  ( records delimited by newline
  fields terminated by ','
  (
  HIREDATE DATE 'MM/DD/YYYY'
  ))
  location ('EMP.CSV') )
  
  REJECT LIMIT 0
  

  -Pavan Kumar N

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Problems with the placement of two images

  I'm trying to merge two photos with Photoshop CC. In the latest version of PS I select an image and drag it to the other image & it would appear as a new layer.

  In online tutorials, it shows a similar approach except that they say convert the background into a layer layer in the two images. I did it but nothing happens. I left the as they are, and nothing happens. The files are NAVE about 35 MB.

  Is there a switch or a preference that I missed?

  Thank you

  Neil

  Hi Neil,

  Greetings.

  I think you are trying to place one image on another, please visit this link on how to do it- http://www.photoshopessentials.com/basics/moving-photos-between-documents/

  Concerning

  Rohit