Problem with the generation of two internal counters pulse trains

Similar Questions

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Problem with the generation DB sequence by clicking on the button apply

  Hi gurus,

  I created the page used as in the example of the box tools tutorial, but I want to put the employee so he used to number id generation lost the sequence number when the Cancel button is clicked.

  So instead of the code in the EOImpl Create method

  public void create (AttributeList attributeList) {}

  Super.Create (AttributeList);

  Number of empnum = getOADBTransaction () .getSequenceValue ("FWK_TBX_EMPLOYEES_S");

  setEmployeeId (number);

  }

  I do in the method of setEmployeeId of EOImpl

  {} public void setEmployeeId (numeric value)

  If (value == null) {}

  value = getOADBTransaction () .getSequenceValue ("FWK_TBX_EMPLOYEES_S");

  }

  setAttributeInternal (EMPLOYEEID, value);

  }

  but whenever the button click apply, I got following messagenumber - in EmployeeAM.EmployeeCreateVO1 EmployeeId attribute is required.

  I have try to disable the validation server with the following code in the PR, but obtained following the message "EmployeeId attribute in EmployeeEO is necessary.

  OASubmitButtonBean applybutton = (OASubmitButtonBean) webBean.findChildRecursive ("Apply");

  applybutton.setServerUnvalidated (true);

  Thanks in advance,

  efends

  Hello

  Uncheck the required property for EmployeeId.

  When the user click to button apply. get the current line for the view and set the EmployeeId filed.

  You don't have to crush create method in the java file entity oject impl.

  You need to write a method in the file java application module.

  public void setEmployeeId {
    XxVo vo = getXxVO();
    Row currentRow = vo.getCurrentRow();
    currentRow.setAttribute("EmployeeId", getOADBTransaction().getSequenceValue("FWK_TBX_EMPLOYEES_S"));
  }
  

  Call this method from the application process when the user has clicked on apply.

  Kind regards

  Anil

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Problems with the placement of two images

  I'm trying to merge two photos with Photoshop CC. In the latest version of PS I select an image and drag it to the other image & it would appear as a new layer.

  In online tutorials, it shows a similar approach except that they say convert the background into a layer layer in the two images. I did it but nothing happens. I left the as they are, and nothing happens. The files are NAVE about 35 MB.

  Is there a switch or a preference that I missed?

  Thank you

  Neil

  Hi Neil,

  Greetings.

  I think you are trying to place one image on another, please visit this link on how to do it- http://www.photoshopessentials.com/basics/moving-photos-between-documents/

  Concerning

  Rohit

• Problems with the formatting on two different servers?

  Hi all, I hav a report run very well in dev server, but when I propose to prod, put it is to have some formatting problems.
  
  Spaces (lines) additional appear in output document.even thogh I use the same rtf model.
  
  I checked the xml data.
  
  I compared the two data xml files. (dev server, server prod)
  
  
  I could see that in the dev file,
  
  rowset <>
  < ROW >
  < > 142 sort_order < / sort_order >
  < name > DMMTBNACAD < / name >
  < name_desc > MMT MM < / name_desc >
  < feat_amount > 0.95 < / feat_amount >
  loans of < bis_name > < / bis_name >
  < p_desc > < / p_desc > < p_desc2 >$ 3.5 avg. < / p_desc2 > < v_p_desc > < / v_p_desc > < p_sec_desc > < / p_sec_desc > < p_sec_desc2 > < / p_sec_desc2 > < sec_name > M M < / sec_name >
  < / ROW >
  < / LINES >
  
  
  
  
  
  In the new file: I have elements in this way.
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  rowset <>
  < ROW >
  < > 142 sort_order < / sort_order >
  < name > DMMTBNACAD < / name >
  < name_desc > MMT MM < / name_desc >
  < feat_amount > 0.95 < / feat_amount >
  loans of < bis_name > < / bis_name >
  < p_desc >
  < / p_desc >
  < p_desc2 >
  $3.5 avg; < / p_desc2 >
  < v_p_desc >
  < / v_p_desc >
  < p_sec_desc >
  < / p_sec_desc >
  < p_sec_desc2 >
  < / p_sec_desc2 >
  < sec_name > M M < / sec_name >
  < / ROW >
  < / LINES >
  
  
  so, I removed the spaces in the new prod xml and makes it look like an old man and then tried for small amt of data. It seemed to work then.
  How to get back on that?

  I also think that it is a problem of data.
  If one space is your question as a solution, you can use this code so that it truncates spaces.
  

• Problem with the creation of two movieclips

  Hello

  I am trying to create two movieclips and two textfeilds with ACE the clip are also movable. So here's my code:

  
  this.createEmptyMovieClip("text1_mc",1);
  
  _root.text1_mc.createTextField("text1",1,0,0,100,100);
  
  _root.text1_mc.Text1.text = "A";
  
  text1_mc.onPress = function() {}
  startDrag (this);
  }
  text1_mc.onRelease = function() {}
  stopDrag();
  }
  
  this.createEmptyMovieClip("text2_mc",1);
  
  _root.text2_mc.createTextField("text2",2,0,0,100,100);
  
  _root.text2_mc. Text2.text = "B";
  
  text2_mc.onPress = function() {}
  startDrag (this);
  }
  text2_mc.onRelease = function() {}
  stopDrag();
  }

  But it only show the last move clip created and the text (Text2) then why dosen't he not show us of A and B?

  .

  this.createEmptyMovieClip("text2_mc",2);

• Problem with the generation of artifacts - jwsc

  I get the error:
  
  BuildFile: D:\EclipseJEE 3.4\workspace\CortexWS\build.xml
  Service:
  [jwsc] TJ: processing module/com/cortex/services/PrePaidService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [AntUtil.deleteDir] remove directory c:\winnt\temp\_8gxh77
  BUILD FAILED
  D:\EclipseJEE 3.4\workspace\CortexWS\build.xml:7: java.lang.RuntimeException: problem unknown javadoc: result = 1, root = null:
  JAM: error - cannot find doclet class com.bea.util.jam.internal.javadoc.JavadocRunner_150
  1 error
  Total time: 1 second
  
  Build.XML:
  <? XML version = "1.0" encoding = "ISO-8859-1? >
  < name of the project 'project' default = 'service' = >
  
  < name taskdef = "jwsc" classname = "weblogic.wsee.tools.anttasks.JwscTask" classpath="D:/BEA_10.3/wlserver_10.3/server/lib/weblogic.jar"/ > "
  
  < name target = 'service' >
  < jwsc srcdir = fork 'src' = "true" debug = "true" verbose = "true" destdir = "D:/CortexEAR" >
  "< file="com/cortex/services/PrePaidService.java TJ ' type = "JAXWS" / >
  "< file="com/cortex/faults/NoResultFault.java TJ ' type = "JAXWS" / >
  < / jwsc >
  < / target >
  
  < / project >
  
  I'm using wls 10.3.
  Thanks for all the answers.

  You try to add tools.jar to your ANT_CLASSPATH.
  For example:
  export ANT_CLASSPATH=$ANT_CLASSPATH;D:/BEA_10.3/jdk160_05/lib/tools.jar
  service of Ant

  HTH,
  -LJ

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A &amp; B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Two problems with the registry and Aero

  1. so I just follow the instructions on the Microsoft page at http://support.microsoft.com/kb/947215 on how to fix the error "the user profile service has no logon. I executer run in Safe Mode, follow the instructions in method 1, reboot and it worked again. After that things return to normal, I open the directory in the registry editor to see if anything changes. And Yes, because when I start Safe Mode and open the registry editor, I don't see that a file ends with .bak, however there are two. Is this a problem?

  
  2 I do not know if this has happened recently or a while back on my computer (the one with the same problem above), since I just noticed it. Usually on my other laptops, all the windows around is a 'border' like this:
  
  But some of the windows now appear when, will be absent this "frontier". Here are some examples:
      
    
  The above image (the stop a job), a border. But it is thin, and on the left side, there is more of a 'border' as the right and down side.
  

  I don't know what happened, but is there a way to solve this problem, because it does not concern normal like other computers?

  Thanks for any help.

  1. as long as you don't face any problems with the registration on your account, it is not a problem.

  2. Please run Microsoft Fixit from the following links and:
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/en-us
  If the problem persists, answer here.

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!