Problems with the selections in cs5

Similar Questions

• Select and mask | Problems with the selection in the process of disappearance - CC 2015.5

  Hi all!

  I've just updated Photoshop 2015.5 CC version.

  I am currently working on a design that needs cutting contours.

  So I picked all the areas belonging to the background of the image and then click on the "select and mask" to refine the edges and then clear my selection as I usually did.

  But instead, my selection disappeared...

  My steps were:

  1. Selection of the areas to clear with "themagic wand tool.
  2. Click on 'select and mask' (output parameters: output to the selection).
  3. Click on 'OK'.
  4. Selection has disappeared!

  I have provided all the tools to their default settings, but nothing has changed.

  I tried to close and reopen the case, repeat the steps to delete the background, but I always feel the question.

  It is a big problem for me!

  I hope that there is someone who could help me/us with this!

  Best,

  Joanna

  I actually asked the new workspace me first thing after update, because I wasn't getting.  It's different enough that you need to learn everywhere, I'm afraid, but it is definitely an improvement when you become familiar with it.  See Julianne Kost guide below, but I suspect that you may need to adjust the sliders that control the opacity of the background.  Or simply click on the transparent part to start the selection.

  

  Select and mask "Julieanne Kost's Blog

• Hi, problem with the selection and processing

  I'm having problems with re-sizing any shape using the Selection (V) tool. It did not work properly, I don't know how it has stopped working. Is it possible to fix this?

  Thank you.

  Navid

  Navid,

  Display > display the bounding box?

  CTRL / Cmd + Shift + B to toggle between Hide and Show, one of the regular keyboard mishits.

• Problem with the selection lasso, quick selection and error messages (saying selection is empty)

  Hello

  I'm trying the sect a person on a picture and paste it into this collage photo, I'm working on that. First I tried to use the quick selection tool, but I guess my man I'm cutting too many colors: when I use the quick selection, it immediately goes into a rectangle around the entire image. I even tried to paint the rest of the picture in black with the exception of humans, but always the same results with the quick selection. Then I tried the lasso, but nine times out of ten, he would stop and do an odd choice. When I finally got a good lasso selection (done after much cursing) then CS6 told me that 'the selection is empty' . What? I made a new layer before I made the selection.

  Can you help me solve these problems?

  I just downloaded CS6 just a day ago and have a lot to learn, but I worked with Paint.net and Paint Shop Pro for the past two years, so I'm familiar with paint and photo editing software.

  Thank you

  Kelly

  [amended to be readable by an admin text]

  Please do not submit your application in green. It's a useless distraction.

  You are trying to make a selection in an empty layer.

  Back to the image of the layer, not the empty one that you created, and you will be able to make a selection.

  Once selected, press Cmd + J to your object selected on a new layer. I think that's what you had in mind.

• Problems with the "Select tool?"

  Because I have updated the latest version of Adobe Illustrator on cc, the "Select" tool does not correctly. It does not scale the rectangle shapes (made by the tool 'Form') using the "select" tool (all other forms work fine). I tried to contact customer service at this topic and it seems that it is a software update. I asked an ETA, but was initially ignored, and the 2nd time said they could not provide me with this information yet, only that he had been sent to the engineering team. I have projects and patterns to talk of the possibility of those not being not on the time and all I was asking for a was an estimated time that the glitch would be fixed and then nothing more said, I booted from the live chat. At this point, I am furious because I tried to be patient ALL day with the customer service team and that's how I'm treated... All I want is a time on how long it usually takes to update glitches can be solved. Even if it takes a month, it would be nice to be able to provide this information to my people.

  Zewster,

  It seems that the problem is a bug that is limited to only one of the MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.

  https://forums.Adobe.com/thread/1595973

  Thus, a switch for the Mavericks with a reinstall might be another way to solve here and now.

• A problem with the selections of feathers - please help!

  I am currently using Photoshop CS4 Extended.  This problem can be demonstrated by the following workflow (the actual size, I used are not important):
  
  1. open a new file with a white 4 "x 4" @ 400 dpi (use the foreground/background default colors - black and white).
  2. make a new layer (Layer 1) and fill it with black.
  3. a second new layer (Layer 2) and fill it black also.
  4. Select a rectangle in the Center about 2 "x 2".
  5. make layer 1 of the active layer.
  6. choose Select-> modify-> feather 100 pixels.
  7. tap on DELETE.
  8 make the layer 2 of the active layer.
  9. choose Selection-> invert.
  10. press delete.
  11 change the property of the layer 2 layer to multiply.
  
  I expect that the two layers (Layer 2 and layer 1) should be exact with the compliments of the other such that none of the white of the background layer should be visible through the black.  But instead, there is a halo of invisibility in the pen area (see this by disabling the background layer).  Step 11 seems to have no effect.
  
  None of you see this problem too.  What can I do to get an opacity of 100% in both layers of feathers?  Does anyone have an explanation for what is happening and why the unexpected behavior.

  Another thing that is strange is that if you just do a sselection feathers to say a black box, fill it with white and then fill the same selection with black, you get a similar unexpected result.

  You can contact me directly at [email protected] .

  Dave White

  http://www.atileimage.com

  Maybe I didn't address it directly, but I did it on a conceptual level: all calculations are multiplicative.

  If a pixel is partially selected, it is multiplicative combined with fill color (X % x 100 + original pixel color - X % x fill color).  To do this, twice, and some vestiges of the fill color of the first filling is part of the original pixel color twice.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I still want the effect somehow and wonder how.

  Can you describe clearly what it is you are trying to accomplish?

  -Christmas

• Problem with the selection of database adapter operation

  Hello
  
  When I invoke the database adapter selection operation, I don't see not all the fields within Invoke1_SelectSelect_InputVariable (I'm supposed to see mapping). Can someone let me know what the problem is. Currently I read a value and if the input value is equal to the value of the field in view he must retrieve all the values associated with this field.
  
  Thank you

  Select empno, empid of base table WHERE empno = #empno_value

  empno_value will be the parameter that you intend to move through a field of the input variable...

• Problem with the selection and transformation of the layers:

  I can't click more freely between the layers in my image. I got my toolbar now to select a layer and then opt to "see the processing of orders. I already tried to reset my preferences, what I should try next? I use the full version of creative cloud on a Mac. Help is very appreciated! Deadline tomorrow afternoon.

  -Joel

  I'm not sure that you understand the problem. Maybe you are looking for the new command in Edit > Transform.

  Red layer: as they appear in (and commit the activation in the options bar)

  Blue layer type: seized and used free Transfrorm (+ validation)

  Layer of green type: seizures and edit > transform > transform again it runs the previous

  

• Problem with the selection of the type: InDesign CC

  When I have put up a form which struck the outside of a printer, I will analyse in the old form to a background layer to use as a template.  In the old InDesigns, I could select the text (highlight text tool) to set up the tabs emphasizes, etc. and be able to see the model layer. Now when I do it, the clear blue highlight covers the model so that I'm not.  I raked by preferences to find a way to make the highlight transparent so I can see the background layer but cannot find anything.  Is there a way to select/highlight the text and be able to see the layer underneath?

  Thank you very much in advance!

  Use the editor mode to select the type or the window > arrange > New

  Command window "file name" see two views of the document. With

  either of these methods, you can select the text while watching the

  live results in the other view.

• Problem with the selection of the field

  Hi I have a table that I need to remove more than one field. I've already placed the RowSelection this multiple table.
  When I go to the table and select several lines to delete, it only deletes the last record, I selected.
  What can I do? My version of JDeveloper is 11.1.1.3.0.
  
  
  Thank you
  
  Published by: Marcos Vizine on 10/05/2010 13:07

  Hi Marcos,

  This code is corret, but check in the property inspector attributes: selectionListener and selectedRowKeys. They must be cleared.
  The answer to your problem.

  Concerning

  Renan

• Problem with the selection list dynamic LOV using bind variables

  I have the following SQL to fill a selection list:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on ck.family = ft.famt_name and ck.newseq in (: NEWSEQ_QUERY_SQL)
  )
  
  Where NEWSEQ_QUERY_SQL is a part of the application that is defined by a calculation of page and essentially returns a list of values NEWSEQ based on some parameters of the user query. For example:
  
  Select distinct (ck.newseq) in the ck list where rownum < 20
  
  The query above works fine with SQL Developer and returns two columns needed (display_value, return_value)
  
  However, it returns no line, when it is used to fill the LOV to a selection list.
  
  If I replace the: NEWSEQ_QUERY_SQL with a list of NEWSEQ hard-coded, it works:
  
  Select d, ch from to)
  Select ft. FAMT_NAME d, pi. FAM_ID_T r
  of FAMILY_TRA ft join checklist ck on (ck.family = ft.famt_name and ck.newseq in ('K0242900', 'K0217200'))
  ) ;
  
  I can even replace: NEWSEQ_QUERY_SQL with hard-coded SQL and it works:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from the list ck where rownum < 20))
  )
  
  But if there is a connection variable (: NEWSEQ_QUERY_SQL), it doesn't.
  
  Selection lists are driving me crazy! They seem incredibly capricious.

  Hello:

  You cannot link a "sql statement" that bind the value you're trying to do.
  P2_FAMILY_LIST must be the SQL statement you executed for the LOV. Something like

  select d, r from
  (
  select ft.FAMT_NAME d, ft.FAM_ID_T r from FAMILY_TRA ft
  join checklist ck
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from checklist ck where rownum < 20))
  )
  

  CITY

• Flex 3 - problem with the selection of an item in the list by default

  How to select an item in the list by default

  default selected item say to index 0

  I tried to stuff like that-

  listid.selectedIndex = somevalueinmyprogram - 1; 0

  but when I debug what I get
  _selectedIndex = 0 selectedIndex = - 1

  and by default is not selected, why so? [I already checked for what is obvious that somevaluefrommyprogram is not equal to 0]

  Help!

  It's a timing issue, as I told you before. As you know flex applications run in Flash Player, and FP works asynchronously, so what happens, is that when you try to put in place the selectedIndex property data is not yet in the dataProvider. What you can do is use the handleCentersListResult and inside of this function the selectedIndex value after completing centersXLC

• Problem with the selection of results that meet all the criteria and not only some

  Hey guys.
  
  The best way to describe it would probably be by the code:
  

  SELECT sup.SuppCode, sup.SuppName, sup.PostCode
  FROM Suppliers sup, Stocks stk
  WHERE stk.Price >
  (SELECT avg(Price) FROM Stocks)
  AND sup.SuppCode = stk.SuppCode;

  Who selects the items (not actually posted) providers who have a higher than average price.
  It gets the items that are above average and neglects those below average, but I want to show him only the suppliers where ALL of their items are above average and not just some of them.
  For example, provider supplies A couple of points 1 and 2 and they are all two higher than the average price supplier A is displayed
  Supplier B provides two points 3 and 4 and only 4 exceeds the average so supplier B is not displayed.
  
  I think it's trivial, but I can't seem to get by. :(
  
  Any help would be much appreciate.
  
  Thank you.

  Something like

  SELECT sup.SuppCode, sup.SuppName, sup.PostCode
    FROM Suppliers sup
   WHERE NOT EXISTS (
      SELECT 1
        FROM Stocks stk
       WHERE sup.SuppCode = stk.SuppCode
         AND stk.price <= (SELECT AVG(price) FROM Stocks)
    )
  

  Who finds all the suppliers that no stock which is lower than the average price, which is identical to the suppliers who only things above average price of stock.

  Justin

• Problems with the Panel tabs with CS5, CC2014, CC2015?

  I created a script with TabbedPanel in ESTK CC, works very well in afx CC 2014, but it seems that there are some problems with the other versions (CS5 and CC2015).

  Can someone help how to generalize the limits and the tabs?

  Here is my Code briefly for the tabs.

  //

  //

  //

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  myPanel.timeSavers = myPanel.add ('tabbedpanel', [0,0,400,300], "Reducing Stress V1'");

  myPanel.timeSavers.cProject_tab = myPanel.timeSavers.add ("tab", undefined, 'Project');

  myPanel.timeSavers.MyTools_tab = myPanel.timeSavers.add ('tab', undefined, 'MyTools');

  myPanel.timeSavers.Explorer = myPanel.timeSavers.add ("tab", undefined, 'Explore');

  myPanel.timeSavers.Others_tab = myPanel.timeSavers.add ("tab", undefined, "Install");

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  //

  //

  //

  Below the results to remain CS5, CC2014, CC2015. How to promote the universalization of the buttons, tabs, alignments etc as in CC2014 in other versions. Someone please help?

  

  Don't you think that the resource string could solve this problem?

  You can certainly try a resource string. I used only once I understood how they worked, I find it much easier to build a UI in this way.

  myPanel.layout.layout (true);  Tried it, but all child elements arranged in a line or column that's it, do not respect the limits specified.

  To a resource string, make sure that every single container element specified margins or spacing info. If they do not have this set the automatic layout manager will just default to each calibration of control internal specifications, which vary with each version of AE.

  How can I universalize the user interface for all versions of EI? While I'll change once and for all.

  There is no miracle solution for all versions of AE to play nice with your construction. You to beta-test your code in each version of the EA you want your script to run on and then unique questions individually. Your script should contain a checker version AE, so you can know what patches, you need to implement when the user runs the script. It is not ideal and is one of the many oddities of software development based on the API of someone else.

• I have a problem with the CS5 updates

  Hello

  I have problems with the update of my CS5. I get an error message "there was an error downloading this update. Quit and try again later.

  Can you please help?

  Thank you

  Eli B

  See if doing manually works

  All the early updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/