Problem with the selection of database adapter operation

Similar Questions

• There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

  There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  The device information Name: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver Completed There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.

  Problem with the PnP devices Detected

  There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.

• Problem with the Logitech Wireless Speaker Adapter

  Hello

  It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...

  The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.

  Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?

  Any help is welcome because I am completely lost on this one.

  Thanks adavance

  chikito11n

  There is no instructions to come with the adapter

  You can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.

  chikito11n

  I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.

  The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.

  First of all, make sure your laptop is equipped with a bluetooth adapter.

  Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).

  As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.

  Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.

• Problems with the selections in cs5

  Hey, recently I started noticing odd behavior that's not happened before involving selections in photoshop cs5.

  the first thing I noticed, when I made a selection with the lasso on any given layer and hit transform, the tool only has not automatically select active pixels as it did before. Instead, the processing area was around the entire selection, I did even if the borders do not contain active pixels. It is a very big problem for me because when I have my items in a certain place, and I want to turn them in this position, thay move somewhat because the selection is not limited to the shape. I was wondering if this is some new CS5 that can be changed. or old function that I've accidentally switched on.

  My second problem is that when I make a selection with the Selection tool or the lasso tool, then I swiitch on the move tool to move the selected content and then switch back to a selection tool to delete only a part of the previous Thatcher so that I can spend the rest of the content, place of deselection of this region, it erases the pixels contained in the deselection. and I just want to remove the selection, do not delete the pixels. I also wonder if it is a function that can be modified or if I have a big problem.

  Any help will be much appreciated.

  AD 1)

  A solution might be to switch to the tool move and press the left and right arrow in the order.

  AD 2)

  One solution might be to enter and exit quick mask by Q hit twice.

• Problem with the retailer regarding Vista disk operation

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi, I wonder if you can help me with some advice, it is on the PC I bought my father-in-law 6/8mnths ago. Until recently its been fine but lately its reading high and gel etc... to cut a long story short...  When I bought the PC 'Vista' has been pre-loaded and I never thought to check if a disc of the "Vista" operating system has been provided...

  The stepfather wants to re - install the system, but did not get a disc and never had one, when ive asked the shop on this subject that they say that they only provide a... surely that goes away, he said...

  Any help would be accepted with gratitude about whats the carnal... I had one with my Dell.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Select and mask | Problems with the selection in the process of disappearance - CC 2015.5

  Hi all!

  I've just updated Photoshop 2015.5 CC version.

  I am currently working on a design that needs cutting contours.

  So I picked all the areas belonging to the background of the image and then click on the "select and mask" to refine the edges and then clear my selection as I usually did.

  But instead, my selection disappeared...

  My steps were:

  1. Selection of the areas to clear with "themagic wand tool.
  2. Click on 'select and mask' (output parameters: output to the selection).
  3. Click on 'OK'.
  4. Selection has disappeared!

  I have provided all the tools to their default settings, but nothing has changed.

  I tried to close and reopen the case, repeat the steps to delete the background, but I always feel the question.

  It is a big problem for me!

  I hope that there is someone who could help me/us with this!

  Best,

  Joanna

  I actually asked the new workspace me first thing after update, because I wasn't getting.  It's different enough that you need to learn everywhere, I'm afraid, but it is definitely an improvement when you become familiar with it.  See Julianne Kost guide below, but I suspect that you may need to adjust the sliders that control the opacity of the background.  Or simply click on the transparent part to start the selection.

  

  Select and mask "Julieanne Kost's Blog

• Hi, problem with the selection and processing

  I'm having problems with re-sizing any shape using the Selection (V) tool. It did not work properly, I don't know how it has stopped working. Is it possible to fix this?

  Thank you.

  Navid

  Navid,

  Display > display the bounding box?

  CTRL / Cmd + Shift + B to toggle between Hide and Show, one of the regular keyboard mishits.

• Problem with the selection lasso, quick selection and error messages (saying selection is empty)

  Hello

  I'm trying the sect a person on a picture and paste it into this collage photo, I'm working on that. First I tried to use the quick selection tool, but I guess my man I'm cutting too many colors: when I use the quick selection, it immediately goes into a rectangle around the entire image. I even tried to paint the rest of the picture in black with the exception of humans, but always the same results with the quick selection. Then I tried the lasso, but nine times out of ten, he would stop and do an odd choice. When I finally got a good lasso selection (done after much cursing) then CS6 told me that 'the selection is empty' . What? I made a new layer before I made the selection.

  Can you help me solve these problems?

  I just downloaded CS6 just a day ago and have a lot to learn, but I worked with Paint.net and Paint Shop Pro for the past two years, so I'm familiar with paint and photo editing software.

  Thank you

  Kelly

  [amended to be readable by an admin text]

  Please do not submit your application in green. It's a useless distraction.

  You are trying to make a selection in an empty layer.

  Back to the image of the layer, not the empty one that you created, and you will be able to make a selection.

  Once selected, press Cmd + J to your object selected on a new layer. I think that's what you had in mind.

• Problems with the "Select tool?"

  Because I have updated the latest version of Adobe Illustrator on cc, the "Select" tool does not correctly. It does not scale the rectangle shapes (made by the tool 'Form') using the "select" tool (all other forms work fine). I tried to contact customer service at this topic and it seems that it is a software update. I asked an ETA, but was initially ignored, and the 2nd time said they could not provide me with this information yet, only that he had been sent to the engineering team. I have projects and patterns to talk of the possibility of those not being not on the time and all I was asking for a was an estimated time that the glitch would be fixed and then nothing more said, I booted from the live chat. At this point, I am furious because I tried to be patient ALL day with the customer service team and that's how I'm treated... All I want is a time on how long it usually takes to update glitches can be solved. Even if it takes a month, it would be nice to be able to provide this information to my people.

  Zewster,

  It seems that the problem is a bug that is limited to only one of the MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.

  https://forums.Adobe.com/thread/1595973

  Thus, a switch for the Mavericks with a reinstall might be another way to solve here and now.

• A problem with the selections of feathers - please help!

  I am currently using Photoshop CS4 Extended.  This problem can be demonstrated by the following workflow (the actual size, I used are not important):
  
  1. open a new file with a white 4 "x 4" @ 400 dpi (use the foreground/background default colors - black and white).
  2. make a new layer (Layer 1) and fill it with black.
  3. a second new layer (Layer 2) and fill it black also.
  4. Select a rectangle in the Center about 2 "x 2".
  5. make layer 1 of the active layer.
  6. choose Select-> modify-> feather 100 pixels.
  7. tap on DELETE.
  8 make the layer 2 of the active layer.
  9. choose Selection-> invert.
  10. press delete.
  11 change the property of the layer 2 layer to multiply.
  
  I expect that the two layers (Layer 2 and layer 1) should be exact with the compliments of the other such that none of the white of the background layer should be visible through the black.  But instead, there is a halo of invisibility in the pen area (see this by disabling the background layer).  Step 11 seems to have no effect.
  
  None of you see this problem too.  What can I do to get an opacity of 100% in both layers of feathers?  Does anyone have an explanation for what is happening and why the unexpected behavior.

  Another thing that is strange is that if you just do a sselection feathers to say a black box, fill it with white and then fill the same selection with black, you get a similar unexpected result.

  You can contact me directly at [email protected] .

  Dave White

  http://www.atileimage.com

  Maybe I didn't address it directly, but I did it on a conceptual level: all calculations are multiplicative.

  If a pixel is partially selected, it is multiplicative combined with fill color (X % x 100 + original pixel color - X % x fill color).  To do this, twice, and some vestiges of the fill color of the first filling is part of the original pixel color twice.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I still want the effect somehow and wonder how.

  Can you describe clearly what it is you are trying to accomplish?

  -Christmas

• Problem with the Microsoft Teredo Tunneling adapter.

  Appears in the device as Manager: Version 6.1.7600.16385 dated from 21/06/2006

  but appears in C:\\Windows\System32\drivers\tunnel.sys (properties/details) as:

  Version 6.1.7601.17514 dated 11/20/2010

  My computer cannot find the device and I can not print online.

  I don't have the authorization to fix, and I don't know how.  Is there a fix from Microsoft for this?

  Lesax

  I suspect that the printer (if earlier) has installed an older driver. I would like to uninstall in Device Manager and then restart your computer.  Windows should install the new a correctly it is unclear if the printer (since you don't tell us what it is) will work with the new driver.

• Problem with the playback of database Sqlite.

  Hello guys,.

  I created a SqLite database and create a Table and insert three records in it.

  But when I try to read data from it.

  So no errors are there and given no reading from the database.

  I am facing this problem since 2 days.

  What shoul I do it.

  I write this code to read the data

  Try
  {
  URI uri=URI.create("file:///SDCard/Databases/SQLiteGuide/"+"MyDatabase.db");
  d = DatabaseFactory.Open (Uri);
  Statement st = d.createStatement ("SELECT name, age FROM people");
  St.Prepare ();
  St.Execute ();
  net.rim.device.api.database.Cursor c = st.getCursor ();
  Line r;
  int i = 0;
  While (c.Next () == true)
  {
  r = c.getRow ();
  i ++ ;
  Add (new RichTextField (i + ".")) Name = "+ r.GetString (0) +", "+" Age = "+ r.getInteger (1)));" "" "
  name.setText ("Name->" + r.getString (0));
  age.setText ("Âge->" + r.getInteger (1));
  }
  if(i==0)
  {
  Add (new RichTextField ("no data in the table"));
  }
  St.Close ();
  d.Close ();
  Dialog.Alert ("show file");
  } catch (System.Exception e)
  {
  System.out.println (e.getMessage ());
  e.printStackTrace ();
  }

  I find the Solution myself.

  Thanks to you all.

• problem with the chain (from database) to the php variable

  This will probably be an easy question for some of you, but I'm having a problem to assign a string to a php variable. I have several RSS feeds stored in a database. the stored information includes the RSS feed name, link to the actual site, link for just the RSS feeds for the site, etc...

  I'm running a / loop to generate the RSS feed. the result is simply the title of the site and the last 8 articles of the site. everything came out fine, with regard to the actual display and the title of the rss feeds showing upward, but I can't plug the RSS feed link without getting an error. This is the code I'm using (is all the code, but it's the only part that gives me bad):

  <? PHP include('RSS/rss_fetch.inc');

  $rss = fetch_rss ('RSS feed link goes here');
  table shows 8 results
  $items = array_slice ($rss-> points, 0, 8);
  Scroll through each element and echo
  foreach ($items as $item)

  
  {? >}

  the bold line is the only place where I am running into a problem. I have the correct rss feed link stored in the database. I would reference him in my code

  <? PHP echo $row_resourceFeed_rs ['rssLink'];? >

  However, if I replace the current link (the one in bold above) by the php in the database call, I get an error. can someone tell me please how to extract the link RSS feeds on the line in bold?

  mathruD wrote:

  $rss = fetch_rss ("");

  You cannot nest tags PHP inside a block of PHP code.

  The following should be all you need:

  $rss = fetch_rss($row_resourceFeed_rs['resource_rssLink']);
  

• Problem with the selection and transformation of the layers:

  I can't click more freely between the layers in my image. I got my toolbar now to select a layer and then opt to "see the processing of orders. I already tried to reset my preferences, what I should try next? I use the full version of creative cloud on a Mac. Help is very appreciated! Deadline tomorrow afternoon.

  -Joel

  I'm not sure that you understand the problem. Maybe you are looking for the new command in Edit > Transform.

  Red layer: as they appear in (and commit the activation in the options bar)

  Blue layer type: seized and used free Transfrorm (+ validation)

  Layer of green type: seizures and edit > transform > transform again it runs the previous

  

• Problem with the selection of the type: InDesign CC

  When I have put up a form which struck the outside of a printer, I will analyse in the old form to a background layer to use as a template.  In the old InDesigns, I could select the text (highlight text tool) to set up the tabs emphasizes, etc. and be able to see the model layer. Now when I do it, the clear blue highlight covers the model so that I'm not.  I raked by preferences to find a way to make the highlight transparent so I can see the background layer but cannot find anything.  Is there a way to select/highlight the text and be able to see the layer underneath?

  Thank you very much in advance!

  Use the editor mode to select the type or the window > arrange > New

  Command window "file name" see two views of the document. With

  either of these methods, you can select the text while watching the

  live results in the other view.