Problems with the 'start' button and the size of the video in the program monitor

Similar Questions

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• problem with the program downloaded to dvd on computer camera

  I recently got a new digital camera and I am trying to download the program from cd/dvd on computer.  When the disc is inserted, it does nothing.  In the manual it states that it is compatible with vista.  I don't know why this is happening.

  Try to go to start / computer and right-click on the CD-ROM drive and click on explore.  Find a program called setup.exe or install.exe and double click it to start the installation.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Problems with the programming phone...

  In the car, I hate that he is no longer a separate volume for navigation. Then, you can no longer listen to music on your phone and hear the navigation instructions. It really bothers me. I don't understand why it never changed. My D1 he did not, my D2 didn't do it, but now my most recent phone and destroyed half of the axis of the car that my phone was once.

  Now for a security problem that seems strange. When you're driving, you can use voice commands and voice to text for you avoid having to look away from the road. If you have a bluetooth headset (I currently have an elite motorcycle flip), you can just say voice commands in the helmet. I'll have to check the voice into text. But, connect it to a car game bluetooth that you must back up the phone on the platform to use because it does not use the microphone to call telephone bluetooth. I use the phone's microphone again, why?

  Someone, something stupid like that, that was over looked in the programming?

  I guess another one is when you use a headset for the phone to wake up always leaving me with a phone in my pocket. If I take a call, shortly after I Pocket dial someone or I have to take the phone out of my pocket and lock it. Kind of kills the idea of the heaset let me answer without stopping my work to do.

  If something is off, sorry. It's 02:30.

  Oh, and if it's a smart phone, why not all parameters will be saved in a folder on the SD card? So, you don't have to lose all the settings to get a new phone, the phone of the guarantee, when you perform a factory reset and never have to do a backup/save settings. CrApple made this patent too?

  You can check the settings under your bluetooth devices, to see if the two phone and media profiles are enabled.

• problems with the IPCC monitoring server port

  I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.

  But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.

  I have nothing in the registry settings.

  What should do?

  Thank you

  I had the same problem as you and this has solved my problem.

• dotnetfx35setup.exe install problem with the program that you try to run vs_setup.MS_

  I went through almost as many links and troubleshooting as I can handle.  Downloaded the full package (dotnetfx35setup.exe) for .NET 3.5 and I get the same error.

  I am perfectly aware that the file .MS_ should actually be a. MSI (Microsoft Installer) file, but the question here is "why this package tries to run vs_setup.ms_ instead of vs_setup.msi?"

  Other issues are the following:

  Tried to extend the file .ms_ in a .msi file, and then tried to run this file, nothing is done.
  Tried to copy the .ms_ file to a file named .msi, then try to run this file, nothing helps.

  What happens on Windows Vista Ultimate Edition.

  Any ideas or comments would be VERY USEFUL.  I worked on this issue since 04:30 and it is now 10:18.

  It was apparently only reported on the patch KB951847 .NET and had nothing to do with the .net Framework 3.5 to my system is KB959209 which after uninstalling and reinstalling, removed the update of the framework .net to be needed in my Windows update history.

• Problem with display 2 buttons and 2 labels

  Hello

  I was able to display 2 buttons. Now, I am trying to display 2 buttons and 2 labels. This code indicates that a single button and a labe.

  Javax.swing import. *;

  import java.awt.*. *;

  java.awt.event import. *;

  SerializableAttribute public class Intro2 extends JFrame {}

  private int count = 0;

  private int count2 = 0;

  Private JButton myButton = new JButton ("Push Me1!");

  Private JLabel label = new JLabel ("Count:" + count);

  Private JButton myButton2 = new JButton ("Push Me2!");

  Private JLabel label2 = new JLabel ("Count:" + count);

  public Intro2() {}

  setDefaultCloseOperation (EXIT_ON_CLOSE);

  setLayout (new FlowLayout()); Set layout manager

  getContentPane () .add (mybutton); Add components

  getContentPane () .add (label);

  getContentPane () .add (mybutton2);

  getContentPane () .add (label2);

  * MyButton.addActionListener (new ActionListener() {}

  public void actionPerformed (ActionEvent e) {}

  Count ++;

  label.setText ("Count:" + count);

  }

  });

  myButton2.addActionListener (new ActionListener() {}

  public void actionPerformed (ActionEvent e) {}

  count2 ++;

  Label2.SetText ("Count2:" + count2);

  }

  });*/

  Pack();

  setVisible (true);

  }

  Public Shared Sub main (String [] args) {}

  try {}

  UIManager.setLookAndFeel (UIManager.getSystemLookAndFeelClassName ());

  } catch (Exception exc) {}

  new Intro();

  }

  }

  Some body please guide me.

  Zulfi.

  Works fine for me. In other words, once I corrected the syntax error in the last line. It says "new Intro", but the class is called "Intro2.

• problem with the program and security

  I haave been Explorer 8provided by yahoo but I don't want to not touse thembecause they have a color code which is only for mypc doe only it does not color code when in the library, I want to go toexplorer 8with using yahoo or msn wheniwent tomicro soft.com/ie it is a sectionthat showed me that I can do this , but the load to the bottom is 4HR I thinkit I have 2 HR not point using yahoo min only.  Why is it faster this way and I guess using msn is the same way if I lower the load so be it I'll get rid of yahoo once I run and don't save program? I ask because on my add or take programs, I've deleted the Explorer windows 8 because I thought he could get rid of yahoo.  It does not, it is why I think it's a pirate or a virus.    If it's a hacker he was reading what is it again?  some timeon yahoo.com iputin my Word id and pass, it says does not exist any available type again I am at the same time, I changed my password and when I used my pc, they wouldn't let me in I will stop here

  Hi gregoryworth,

  ·         Are you referring to Microsoft Security Essentials?

  If so, you can first install Internet Explorer 8 as mentioned in my previous post and then install Microsoft Security Essentials by that your antivirus software.

  Anti-Malware, viruses, Spyware Protection | Microsoft Security Essentials

• Problem with the program manager__

  I recently installed an update of windows 7 to microsft, whereupon my computer program manager seemed to detect a lot of programs on my computer still running smoothely.  Programs such as Microsoft Office and Google Earth still function perfectly as they did before the update, but still they did not come up on top of my list of program manager.  Please help me.  To contact me, send me an email to * address email is removed from the privacy *.

  anupamkwin7,
  I would first check that you do not have any type of infection malware\virus.  If you do not have an antivirus\antimalware program, then you can look at these discussions:

  Get rid of malware

  Can I clean an already infected computer?

  You can also use the restoration of the system to a point before you were aware of this problem.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the Guide of TV Media Centre in the United Kingdom for the new year?

  Since midnight January 1, no data are available for any channel in the guide, even though it says that it has successfully downloaded the latest announcements of guide. Does anyone else have this problem?

  I tried a new analysis for the services and set up the guide even once.
  P

  Hello PGreenhill,

  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.