Realtek rtl8139 problems

Similar Questions

• How can failed Realtek RTL8139 network card I download another

  my card network Realtek RTL8139 failed, how can I download another

  I just downloaded from the HP website and let my comp. do it for me.    Works very well.

• Realtek RTL8139/810 x Family Fast Ethernet NIC #2

  Hello

  I recently bought windows 7 ultimate and am ready to upgrade to windows xp day, but just need an answer to the question.

  I have a Realtek RTL8139/810 x Family Fast Ethernet NIC #2 adapter and when I run windows 7 upgrade advisor it shows that it is compatible, I wonder what I have to install the drivers/software for this after installing Windows 7 or just install my internet as usual?

  Thank you

  You shouldn't do anything. The driver should be installed automatically.

  Thank you
  Chris

• Satellite A110-195 - LAN problem (realtek RTL8139)-"Limited or no connectivity."

  I Satellite A110-195 and having problems with the connection on the net, I reinstal driver and aplication but the problem remains, only what happens is that I get messege "Limited or no connectivity."

  Help, please!

  You connect to a cable or a wireless connection?

• Realtek driver problem

  Hello.

  I have a problem with my desktop computer. I recently installed windows 7 and the realtek just used to install ethernet controller driver.

  my pc (i - 3 processor 3240, graphics card nvidia gt 630, type of motherboard - hp, original windows operating system 7) Please help if you can.

  I think I found a driver that works... it...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943828&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133348_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Here is a list of the hardware ID ID you posted supported in the file of configuration information and the exact is listed here...

  ; 8168G S5 default WOL disable
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C; HP_Cupertino3
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AC8103C; HP_Angelica2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2ACE103C; HP_Pittsburgh2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2ACF103C; HP_Holly2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AD5103C; HP_Formosa
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2ADA103C; HP_Joshua
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2ADC103C; HP_Lavaca3
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AE0103C; HP_Jasmine
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AE2103C; HP_Cork2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AE5103C; HP_Larrybird
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AEB103C; HP_Lawrence2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AEC103C; HP_Adenium
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AED103C; HP_Leeds-G/U
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AEE103C; HP_Ackee-U
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF0103C; HP_Azara/Azara2
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF2103C; HP_Arroyo3
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF3103C; HP_Rali & Kaili
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF5103C; HP_Armand3
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF6103C; HP_Guilin
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF7103C; HP_Memphis
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF8103C; HP_Ackee2/U
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF9103C; HP_Lindesberg/G
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AFA103C; HP_Laurel-G
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AFC103C; HP_Azure
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2AFD103C; HP_Alloy
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B04103C; HP_Dominica-B (Larkspur)
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B14103C; HP_Boomer-broccoli
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B1B103C; HP
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B1E103C; HP
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B1F103C; HP_Daisy-G
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B20103C; HP_Taipei-G
  RTL8168%. DeviceDesc % = RTL8168GS5WOLDisable.ndi, PCI\VEN_10EC & DEV_8168 & SUBSYS_2B24103C; HP

• Audio Realtek driver problem

  Hello

  Indead I have two distinct problems:

  One: You have several problem when you perform the Windows Update for the Realtek drivers:

  Realtek Semiconductor Corp. - Equipment, Audio - Realtek High Definition Audio

  Download size: 36.5 MB

  You may need to restart the computer pay that this update is applied.

  Type of update: "optional" terms

  Audio Realtek Semiconductor Corp., other update of material software released in September 2011

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and support:
  http://support.Microsoft.com/select/?target=hub

  If doing this update, nothing more is not working, not more solid, so for more information, I'm under system with the following characteristics:

  The model No.: CQ1120FR
  Product no.: QD600EA #ABF
  Series No.: {removed privacy}
  Software version: 11WE3DRW601 #SABF #DABF
  Service identity: 121-511
  PCBRAND: COMPAQ

  Running Windows 7 Edition family of Familly Premium

  So if anyone has a solution, would be happy to get feedback.

  Second problem:

  In effect also with regard to sound, I never managed to have camera webcam works with the sound on my computer (product above description), I tried to install microsoft LifeCam, torsion ot Hercules HD, and when installing drivers I have no sound (video works). The only way I have to get his work is to re-init, return to the original realtek drivers using the HP utility recover!

  If anyone can help, it is more tha welcome

  Thanks for your help

  -Christian

  Just to add some info, which seems to not pass in my first post, the only wy to get her back (after update of microsoft doinf) was to reload the driver from realtek to the HP utility plant.

  See you soon

  -Christian

• Updates Realtek RTL8139 Family PCI Fast Ethernet NIC

  I need the updates for this card video, but couldn't find a link for it. I use windows xp. Someone has a link and the Realtek website seem to have none. Thank you

  If you are looking for a video card for this network card driver... I think we found your problem.

  Regarding the realtek site doesn't have it all...  Where did you look?  Must not have been here.

• Realtek driver problem for

  I have a problem when I run the troubleshooting that gives the following result.

  "Problems found."

  Realtek RTL8168B/8111 b Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) has a driver problem.
  There is a problem with the driver for Realtek RTL8168B/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) b. The driver must be reinstalled.

  Not fixed
  Reinstall the device driver

  Completed

  Hardware changes may not have been detected

  Detected
  Search the recent hardware changes

  Completed ".

  Looking through the database community someone with the same problem was given this patch.

  NDIS 6.0 means, you have installed the Vista driver. Go to the Realtek site and download the driver Windows 7 (NDIS 6.2)!

   

  I asked advice from Realtek on how get this driver, but it fell on deaf ears. Can someone tell me where and how can I get the driver I need it please?  It may be that I have the wrong description of the driver.

  Go to your computer manufacturers Web site and download the driver for your specific model.

  I hope this helps.

• Satellite M70 - need WLAN driver for realtek RTL8139 Family

  I need a driver for the lan wireless for realtek RTL 8139 family in my satellite M70 under windows XP.

  Who can help me?

  All WLAN drivers, you can download from the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
  Check it out.

• driver Realtek lan problem

  Hello Sir

  Recently replaced the hard drive in my laptop, forcing me to re-install Windows 7 Ultimate edition. The laptop is a HP pavilion n011tu 15

  Installation went well, now trying to download the drivers for the network card on another computer and install it via a USB on the laptop. I get error messages when I try to do, I think I have the right software to install, but I'm not sure. First message that popsup is an error saying "Findfile failed. I press OK - then after a few moments, I get the message "realtek network controller is not found. If hibernation is enabled, please connect the cable. »

  I tried to resolve, but can not fix. Please Sir do little help...

  .

  Hello:

  Sometimes it must first install the first Intel chipset driver and restart the computer before the installation of the ethernet driver.

  One should always first install the chipset driver and restart the computer before installing any other driver to avoid things like this happen.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Then try to install the ethernet driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Realtek RTL8139 FAmily PCI Fast Ethernet NIC works only under Windows XP

  I just install Park in windows XP 2 and same drivers are not installed what are them; -.

  • network controller
  • Modem PCI
  • video controller
  • video controller (VGA Compatible)

  I used the CD of the motherboard only its pilots were reacting but not of those why?
  and where to find these drivers?
  I use HP COMPAQ NX9030

  Hi SPAZ-Manana,

  When you install Windows XP on the computer, it does not install device drivers.

  Use the link to download the latest drivers on the HP site and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Realtek Fast Ethernet Controller RTL8139 works do not under Windows 7.

  I have a problem getting my Realtek Fast Ethernet RTL8139 controller working under Windows 7. During my first installation of windows, in which the controller was visible device manager, I think to remember, but after the first reboot, it disappeared.
  I have two controllers active ethernet in my system, the first one mentioned above and the second: Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [on board].
  Certainly, the controller who is not found is working because LEDS are light when I connect the card to a cable. The other computer that is connected to my PC even shows that a 100 Mbit connection has been created (with problems though). However, it is not possible to communicate.
  I already tried to install the latest drivers from Realtek for Win7 page (dated on the 22.09.2009) but it did not help.

  System Specs:

  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz
  (Vivid RAM) memory: 4.00 GB
  Graphics: NVIDIA GeForce 9500 GT

  System

  Manufacturer: Gigabyte Technology Co., Ltd..
  Model: G31M-ES2L
  SystemType: 64 Bit - OS
  Number of cores: 2

  Network card:

  Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [work]!
  Realtek RTL8139 Fast Ethernet Controller (NDIS 5.1) [DOES not work!]
   
  OS: Windows 7 Professional (Version 6.1.7600)

  Hello

  Uninstall the audio player of the program and features.

  Then install the Realtek driver by downloading it from the link below:
  http://America.Giga-Byte.com/filelist/Driver/motherboard_driver_audio_realtek_azalia.exe

  Cheers and enjoy... :))

• Satellite P20 & Orinoco card WiFi problems HELP?

  I hope that one of the users on the Board of Directors may be able to advise me.

  Details of hardware/software/Os & driver are listed below for reference.

  Wired LAN works fine and connects to the small network of 10 Base T ethernet with Internet connection sharing. IP addresses are automatically assigned by DHCP on the gateway computer.

  Problem is when I try to use or wireless LAN configuration to connect to an existing gateway used by two other laptops. Windows detects the device without problem but will age for the acquisition of the IP and advises when there is limited connectivity (fact ConfigFree). A connection is established and the signal strength is excellent but I am then unable to connect to the network via wireless connections or wired. The same problem arises even if I assign the IP address manually for the wireless card.

  When I then disable the wireless card, then I can connect through the LAN port cable again.

  I use Windows to configure the wireless card. The manual suggests using the Atheros Client Utility but all options on this are greyed out!

  The details are as follows:

  PC: Satellite P20-S103 Mod; PSP20E-00V7V-FR

  OS: Windows XP Media Center Edition SP2

  LAN card: Built in, identified by Windows as Realtek RTL8139/810 x Family Fast Ethernet NIC driver 5.606.811.2003 Version

  WiFi network card: integrated, identified by Windows as Orinoco PC Card Driver version Agere Systems 7.62.0.390 Mini

  Wireless Access Point: 3Com 3CRWE747A 128 Client 802 network Type. 11 b = Infrastructure.

  Atheros Client Utility: Build Sep 26 2003 Version 2.4.2.18

  Hope you can help. Looking forward to you with suggestions.

  Thank you

  Graham

  Hi Graham

  In my opinion, it is not a big problem. In my opinion, you should try to disable an option in the tool ConfigFree. Please start ConfigFree and go to map of device settings. There you can find the background option called Enable Wireless when cabledisconnect occurs. Check if this option enabled. If so, disable it and try again to make the same connection.

  I hope it helps.

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Problem starting replacement Pavilion Notebook Hard drive

  Hello.. hoping to help...

  Just bought a laptop at the pavilion zv5000 with a bad hard drive...

  Replace hard drive with a concert from 160 western digital...

  When I try to start with the original application and driver Recovery DVD, I get the following message...

  Intel undi, pxe - 2.0 (Build 082) Copyright 1997-2000 Intel Corporation.

  To v2.13 controller Fast Ethernet PCI realtek RTL8139 (X) 18130/810 (020326)

  PXE - E61: media test failure, check cable of

  PXE - MOF: Output PXE Rom...

  It is as far as I can get and the message just for rehearsals...

  I went into settings sure andmade I am booting from the CD Rom drive, but still have the same problem.

  Can someone tell me what I am doing wrong?

  Thanks for the tips... have a great day

  Sam

  > Replaced the hard drive with a concert from 160 western digital...

  > When I try to start with the original application and driver Recovery DVD

  "Application and driver Recovery DVD" are not a (hardware) boot media, you need an operating system to be installed first.

  OS install first, after that the drivers and applications.

  Pekka