Problems with updates 'Configuration failure Windows updates.

Similar Questions

• Windows 7, problem with update

  I am facing the problem with the release of windows 7, it shows the error code 80070570 and 800 b 0100.
  I can't find a solution, how to address this issue.

  Hello

  How to fix update error 800b0100 Vista (and Windows 7)
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• Problems with updating creative cloud to desktop. (error code: 2)

  Problems with updating creative cloud to desktop. (error code: 2)

  Hi Mike,.

  You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

  Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Problem with update of Photoshop, Illustrator and Indesign CS6

  Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)

  Hi El Gondo,

  The following could explain and help solve the problem...

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html

  Thank you!

  Ankit

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

  can anyone help

  I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

  Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

• Problem with updates on Windows 8 - Configuration has failed & returning Exchange

  First of all

  I want to apologize for asking questions about the problem which has been solved so many times...

  ... and yet it seems that no solution applies to / solved my problem.

  Let me describe my situation and context "briefly":

  I have install Windows 8 Pro, I have installed in September 2012. I had been provided with Win 7 and Win 8 activation as a computer SCIENCE student keys during my studies. I have not used 8 win a lot since I preferred Win 7 and I only wanted to test the 'product '.

  Judging by the time when previous updates have been installed, the system was launched several times in March 2013, December 2013 and January 2014. After that, the system "folded" so far. When I launched the system on 26.07.2015 there was like 50 updates that have been prepared (or wanted to be installed... Let's say "pending"). About 30 of them installed successfully. Then I double-checked. I used to double check the availability of updates when some fail to install (mainly from my previous experience that sometimes an update is no longer necessary when another installs).

  Now, to the point...

  I have 133 major and 3 optional updates that want to be installed. Everything that I select (few of them), or all of them fail to install. Installation begins normally, then needs to restart (all) and during the nex to the top starting, the updates can "Configuring updates... 98% ' and then fail and are starting to go back.

  The system is more or less vanilla installation with some basic drivers and the 3DMarks so I doubt that I've caused this problem.

  I've been googling and try to solve this problem for 5 days now, here's what I found:

  1. first of all, I tried sfc / scannow to see if there is any corruption. I received the message that some files were corrupted and could not be repaired. The launch of 6 and 7 of this order, I finally got the "Windows Resource Protection has not found any breach of integrity." (it is true however that I tried a lot of solutions in the meantime). However before that, the CBS.log newspaper included information that:

  Cannot repair Member "utc.app.json" file

  (also of telemetry ".") "ASM - WindowsDefault.json" and I think that 'Amd64\CNBJ2530. PBO' have been mentioned... several times)

  But as I said, from this moment I do not have this problem.

  2. because I had problem with CFS, I tried DISM.

  ScanHealth gave:

  The component store is repairable.
  The operation completed successfully.

  However, RestoreHealth was not optimistic:

  The restore operation failed. Be the source of repair was not found or the comp
  onent store is not repairable.

  The journal includes:

  Preparation of control system was updated.

  Summary:
  Operation: Detect and repair
  Result of the operation: 0x0
  Last successful step: any operation is complete.
  Total of Corruption detected: 0
  CBS manifest Corruption: 0
  CBS damaged metadata: 0
  Corruption shows CSI: 0
  Corruption of the CSI metadata: 0
  The Corruption of the CSI Payload: 0
  Total fixed Corruption: 0
  Repaired CBS manifest: 0
  Manifesto of CSI repaired: 0
  Repaired CSI payload: 0
  CSI store metadata refreshed: true

  3. the 'solution' next I'm focused on a system reserved partition. I came to the information Windows 7 uses 100 MB Sys. Reserved partition while Windows 8 uses 350 MB. I think I stumbled on information that it can be connected to the problems so modified the partition of provision (safely, in regards to the system reserved partitions and Windows 8) and increased the extra partition of 250 MB. This however proves to not be connected.

  4. some sources claimed that C:\Windows\SoftwareDistribution/download content may be the case. So after the Windows Update service has stopped I deleted the download content (I think on 1 try I deleted event pending.xml from WinSxS. Of course then I restarted the redownloaded updates of service, etc...

  5. I tried the update servers MS Windows Diagnostic.cab (just for the record, this tool renames pending.xml among others). This diagnosis is always problems no matter how many times I launch. It shows sometimes 2, sometimes 3 questions for example:

  

  Here are the main 'solutions' that I tried, but as you can guess, none of them worked. Just for the Windows registry has reported these problems viac Action Center:

  

  And I also found some information in WindowsUpdate.log:

  2015-08-02 01:27:28, error CSI [email protected]/8/1:23:27:28.681 (F) CMIADAPTER: failed. HRESULT = c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)]
  Element:
  [163]""
  [gle = 0 x 80004005]
  2015-08-02 01:27:28, error CSI [email protected]/8/1:23:27:28.681 (F) CMIADAPTER: out with HRESULT = c004f01f code [error, facility = FACILITY_ITF, Code = 61471 (0xf01f)].
  [gle = 0 x 80004005]

  2015-08-02 01:27:28, error [0x01803c] CSI 000000db Failed (F) execution of the installation queue item: SppInstaller ({1b265fd2-721c-4e59-ad55-9d102a5d1d7f}) with HRESULT c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)].  Failure will not be ignored: a restoration will begin after all operations in the queue of the installer; Setup is reliable (2) [gle = 0 x 80004005]

  Here, the infamous rollback is mentioned. I was not able to identify the exact update (or updated) what causes these cancellations so I hope it's something I could be helped with at least. The internet is full of KBs that this cause so I can't count on that, at least for now. I also want to note that I tried everything under boot. And also can not clean installation since I have no more join the MSDNAA where I had as a student activation key. I hope that I could upgrade to Windows 10 without him in the coming months, so that's why I concentrate on getting this environment to work and migrate to it in time.

  I'll be very grateful to anyone who can help me with this problem.

  In & out.

  John

  Given that no one could help you, I myself helped ^^.

  First of all, to all those who have problems with the fact that their updates install suddenly, you must change the settings for Windows Update. Change the option other than an automaticall installation (I used the automatic download, manual installation). In this way, you can install the updates in smaller batches. Personally, I installed updates to 5 or 10 (or almost). The updates that have been tens of MB, I installed only. What struck me most surprised, I could (at the time) to install all updates. In the case where you wouldn't you know at least certainly update you need to solve the problems.

  After all updates have been installed, I turned on the automatic download and installation.

  Concerning

  John