Problems with VMware Player

Similar Questions

• Problems with media player 11 and all other players, playing music is broken?

  Problems with media player 11 and all other players, playing music is broken?

  Hi all

  I have a big sound even and odd / problem reading music?

  My computer using windows media player 11 and classic media windows and others to play my music in the hard lists recorded by windows media player 11 copied from my CD.

  But here's the weird problem that only started to happen now, when I play music saved on any one of the players of the computer the sound breaks sometimes but not always?

  Even if I try tp use players like windows media player 11 to play recorded video clips sound breaks toward the top, but the video image only?

  I have a newly completed with windows xp home system and service pack 3, and all memory and material necessary for a pc game of level, a new graphics card was installed and by the way the problem of noise was there before this was done?

  I don't know what is the fault? And I don't know how to find out what the required audio driver are for his computer system I?

  I tried the right click on the audio device to see if the pilot could be updated in case that's all? All he asks is a cd or a floppy disk, but I thought you could ask to search for drivers online too?

  He even now breaks the game sounds too!

  Help, please

  If you access Windows Update (start - programs - Windows Update), you can
  see if there is a newer driver. The drivers are optional updates are not so made
  automatically.
   
  Download the driver for your audio hardware manufacturer (or motherboard if
  "It's built-in sound). They are often newer than Windows Update.
   
  This explains how to disable the improvements.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it
   
   
   
  --
  ..
  --
  "zorkspacer" wrote in message news: 9bd0240a-60ba-4186-a47f-38d6b3f88ddb...
  > Problems with media player 11 and all other players, playing music is
  > broken?
  >
  > Hi all,
  >
  > I have a big sound even and odd / problem reading music?
  >
  > My computer using windows media player 11 and windows classic media and
  > others to play my music in the hard lists recorded by windows
  > media player 11 copied from my CD.
  >
  > But here's the weird problem that only started to happen now when I
  > play music saved on any one of the players of the computer sound
  > breaks sometimes but not always?
  >
  > Even if I try tp use players like the windows media player 11 to play
  > saved video clips, sound breaks toward the top, but the video image only?
  >
  > I have a newly finished system with windows xp and service pack 3 home, more
  > all the memory and the material necessary for a pc level game, new graphics
  > card has been installed, and by the way that the noise problem was there before
  > who did?
  >
  > I don't know what is the fault? And I don't know how to find out what the
  > driver needed sound are for his computer system I?
  >
  > I tried the right click on the audio device to see if the driver could be
  > update in the case where that's all? But everything he asks a cd or a floppy disk, but I
  > thought you might ask it to search for drivers online too?
  >
  > It even now breaks the game sounds too!
  >
  > Please help
  >
   
   

• Problem with video player

  Hi experts,

  I'm under 2 problems with video player in my application:

  1. the backlight turns off automatically after 30 seconds by default during playback of a video file.

  2. impossible to adjust the volume, he always plays with the highest volume.

  When I try to play the video by media player integrated BB Bold, the volume is adjustable and the backlight is on during the display of the video. Is it possible to do the same thing in my application?

  Thanks in advance,

  Kind regards

  Binh Nguyen

  -For the first problem, you will need to set the backlight to yourself in the code, something like:

  If ((Display.getProperties () & Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT)! = 0)
  {
  Backlight.Enable (true, 20);
  }

  Be careful about the number of seconds that you pass to the enable(). They are tp limited 255 seconds even if you spend a lot. This means that if your video is longer than 255 seconds, you must call the activate more than once. I usually call it the timer as well as check the status

  -For volume control, the player does not meet the default control buttons. You need to implement it in your code.

  Set the class of player that you use to implement the method as follows:

    protected boolean keyControl(char c,int status,int time)
      {
          if(c == Characters.CONTROL_VOLUME_UP)
          {
              //IncreaseVolume;
          }
          else if(c == Characters.CONTROL_VOLUME_DOWN)
          {
              //decreaseVolume();
          }
          return super.keyControl(c,status,time);
      }
  

  Where the increseVolume is something like:

  If (_Kit! = null) //_vc = player VolumeControl
  {
  _vc.setLevel (volumeLevel);
  }

  Rab

• Cano I run several virtual machines with VMware player?

  I can't find a way to launch several machines virtual oin my Windows 7 PC with VMware player. Please advice if this is possible. If this is not the case, what vm product will do the trick?

  Eric

  You can also double-click any VMs .vmx files you want to start.  What I've done is set up the shortcuts in my quick launch for my VMs frequently used toolbar.  Each shortcut target the respective virtual machine .vmx file, is to start.

  Hope this helps

• The simplies never backup? -with VMware Player

  Hello community,

  is it possible to use VMware player form simplies to 'save' like this:

  1. a virtual machine inside directoty create: VM_Win7_Folder

  2. copy and paste the complete record for let say Copy_VM_Win7_Folder

  3 and virtual distributor once the VM_Win7_Folder is infected or something just go and delete the entire folder

  with Windows Explorer and rename Copy_VM_Win7_Folder in VM_Win7_Folder and start VM?

  Is it works too?

  Best regards

  Milan

  Yes, make a copy of the files that make up a virtual machine is a way to save.  Made it with the stop of the guest operating system, not suspended and VMware Player closed.

  You can also use snapshot to revert to a previous State thus solve the immediate problem, but remember to always keep any user of data that is stored with the file systems Guest if operating system you do not lose and the user data when it is necessary to restore a VM from the backup or to revert to a previous snapshot.

• I need assistance with VMware Player Manifest.txt file

  I make a program of federal work with ITT Technical Institute study. Well, we have VMware Player installed on lab computers, and on a weekly basis, I have to empty the student accounts.  Well some student accounts I can't delete, I am logged in as the administrator of the Local Machine and when I try to remove most of the accounts I get the message saying that the manifest.txt file is "cannot delete manifest.txt.2: access denied."  Make sure that the disk is not full or write protected and that the file is not currently in use. »

  and see that I have clear accounts because space is limited on these machines.  I was just wondering if any 1 can help me on how to remove this file, it would be greatly appreciated and if I have this post in the wrong section will be some 1 let me know?

  Thank you

  If the boot without failure for the administrator account and not be able to delete a file under the other user account or the account itself, there is something else wrong.

  First, I make sure that no VMware not associated with the process are running which must be in Mode safe and then I would take a look at the permissions on the file and, if necessary and or possible I would take possession in order to delete the file.  Otherwise issues that may could be corruption of the file system, in which case I would run chkdsk with the argument/f or if it's just that a file could / can be an area damaged the disk hard physics so you can test the physical hard drive with a diagnostic tool specific HARD drive manufacturing.

  Other options would be to try to remove the file from the Recovery Console by booting from the installation disc or Windows using a Linux Live OS like Slax.

  BTW is this topic on the host or guest?  If in a guest I just delete the virtual machine and replace it from a backup and if it is on the host computer, then this is not really a matter of VMware itself and it is more a problem of Windows Administration and must be treated accordingly from the point of view of the user account and or file system management regardless of the application that created the file and act accordingly.

• vmrun suspend problem of VMware Player

  I've been using VMware workstation for a while but recently switched to VMware player 3.0, (largely because of the irritating instllation problems for Workstation 6.5.3 under Ubuntu 9.10 x86_64).

  With my computer, I use the vmrun command close all my virtual machines.

  Despite downloading the latest version of Vmware-vix (1.8.1), vmrun suspend & lt; path to the vmx file & gt; generates this error message:

  Unable to connect to the host

  Error: Type of Service VIX_SERVICEPROVIDER_VMWARE_WORKSTATION

  My reading of the documentation seemed to suggest that vmrun must work with the player as a workstation. Please could someone help me understand what ' I'm missing here?

  Thank you very much

  Enter the code < code > < code > here you use the t on vmrun indicator to indicate that the target is a vmware player? :

  < Code >-T < hostType > (ws| ) Server| server1 | fusion| esx| vc| Player )< code >

  I was able to run suspend with:

  <code>$ vmrun -T player suspend /export/vmware/cmp/cmp.vmx
  
  
  </code>
  

  It is with the version of the player (3.0.0 build-203739) included in VMWare Workstation 7 (on Ubuntu 9.10).

  of http://serverfault.com/questions/97999/vmrun-suspend-vmware-player-problem

  StarWind software developer

  www.starwindsoftware.com

• Problems with cd player.

  * - Original title - .cda

  Soon after reinstalling new windows xp pro cd, cd players that worked very well started to only read > cda version info on the disks, that is, audio books, etc.. How can I reset ability to play mp3 files?

  Hi Samuel W.

  Welcome to the Microsoft community. I see that you have some problems with the cd player. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. do you have an external CD drive or an internal CD drive?

  4. have you made changes on the computer recently?

  I suggest you to refer to this article and check if that helps.

  Drive your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• Problem with Media Player

  OK, so I have windows media player and when I try to play a dvd on it a message saWindows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. Windows Media Player cannot play back the video DVD.  So I did it only to get the same result. Can I download can fix it or fix it? In addition, he has no problem reading dvd only CD of

  Hello

  1. What is the format of file/extension of the files in the DVD?
  2 do you have this DVD still works properly before?
  3. have you installed any third-party CD/DVD burning software?

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

• Problems with media player and Streaming Online & Essentials

  I didn't know where to post this because it concerns problems reading media downloaded and all media and streaming online. In other words, any media. I have now found my problem with the problem and that's coming from MS Essentials and becomes very disruptive. Carefully One I've ever had this problem and it's probably because it was not a free service, however, since I installed essentials the problem has worsened. Also on one of my computers, the update will start just randomly and all but shuts down the system. Yet once, never happened with care. If this problem persists I will launch essentials to another more compatible antivirus protection system. Moreover, it happens with all other types of media also like Real Player and i Tunes so it is not exclusive to WMP.    All resolutions to this problem would be greatly appreciated. Thank you

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installation and upgrade of Microsoft Security Essentials program Forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads

  Analysis, detecting, and removing threats Forum at the link above

  http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads

  Updating Virus and Spyware definitions Forum at the link above

  See you soon.

  Mick Murphy - Microsoft partner

• A very strange problem with DVD player (some DVD play not)

  Hello everyone.

  I bought a laptop Dell Inspiron 3543 2 months ago. Overall, I am very satisfied with this product, but I have a problem with the DVD player. When I insert some DVD discs, the driver reads some DVDs but not others. After trying to play DVDs, I see that the DVD player play about half of the DVD I'm looking for. Although I can guarantee, I didn't send my laptop to the service because I can't work even a day without my cell phone. So, in order to solve the problem, I bought a DVD player new, original Dell (the same model of dvd player, which is Panasonic Matshita DVD +-RW UJ8E2). Today I started using my new DVD player, but it also has the same problem as my old DVD drive or it also does not play some DVD.

  To make the issue even more strange, here are some details:

  -My dvd drives have no problem and I have tried many original DVDs (especially the original films). And all the dvd disks that do not play on my computer play on other computers with no problems. There is no problem with the disks.

  -Certainly no problem with the "DVD region Code". I use original DVDs with region code 2, which is the area code for my country.

  -All my drivers, the operating system and the dvd drive drivers are up to date. When I look at my DVD drive properties, it is written that "the dvd drive works properly.

  -When I insert a DVD disc, if my DVD player he plays, he plays each time. But if my dvd player does not play a dvd, and then he never plays it. So, there is a consistency in the dvd disc set to play or not. When a DVD disc does not play, my DVD player rolls the drive some time and then the DVD done pretending as if there is no disc in the drive.

  -Both my old and newly purchased DVD drives have exactly the same problem, so I think that there's no problem like a lens dirty. I also think that there is no mechanical problem with one of my DVD drives because my newly purchased, original DVD player also has the same problem.

  I thank everyone for any help or advice in advance.

  Today, I received my dvd player third, new, Chinese, not original from a seller of spare part. He plays all DVDs with no problems. :)

  If in the future someone always has the same problem as me and read this Web page to find a solution, you know where is the problem.

• Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

  I installed it,

  C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
  BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
  VMWare... VMware-player-version 4.0.3 - 703057.exe

  I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
  I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
  What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

  The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
  but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

  I tried the VMWare Player. It works very well.

  What I am doing wrong?

  Hey be based,

  The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

  1. raise some Code by signing keys: keys

  2. download and install Momentics IDE and install

  3. download and install Blackberry Simulator

  4 download and install VMWare

  5 disable all firewall programs including windows firewall

  6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

  7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

  8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

  9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

  10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

  11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

  12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

  13 open a sample application

  14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

  15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

  16. right click on the project file, and then select generate the project.

  17. then right click on the project again and select run as > BlackBerry Application C/C++

  18. If all goes well, everything should work from there.

  Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

  I hope this helps!

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• Vmrun fails with VMware Player

  Hello

  I am currently using VMware Player version 7.1.2 and VIX version 1.13

  I want to start my VM using vmrun VIX, unfortunately when I type in the command line, the following command:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

  It will give me something like this:

  Unable to connect to the host.

  Error: The specified version is not found

  I'm doing something wrong or is this a bug?

  For the mention I don't want to not buy or even to install VMware Workstation as I had a lot of trouble with it in the past (I had to do a system restore to get rid of) uninstall.

  OK, managed to make it work, here's how:

  1) there is a vixwrapper config.txt file in the folder VMware\VMware VIX. Make a backup and overwrite the following on the content of the file:

  #@Version-Info
  #
  # VixAllProducts revision mapping for Workstation/Player
  #
  # This file translates product version specifications into the appropriate Vix
  # implementations.
  #
  # Each @Version-Info line has 5 white-space seperated entries:
  #
  #    provider-type: ws, esx, viserver, etc
  #    apiVersion: the apiVersion supported, as passed in from VixHost_Connect()
  #    ipc-type: none, vmdb, vmodl, cim
  #    product-version: the product version string
  #
  #    implementation-directory: the path to the library that implements the
  #          version described by the first 4 parameters
  #
  #
  # The configuration is based on the first 4 fields, which describe
  # the product.  The 5th field is the location.  To force it to try
  # multiple location, the same configuration can be repeated.  Note that
  # list is built in LIFO order, so the latest entry in the configuration
  # will be the first used.  If for some reason that value fails, it will
  # continue through any other matches.
  
  # Workstation 11.1.2 and Player 7.1.2
  ws        17  vmdb  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  player    17  vmdb   7.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  ws-shared 17  none  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  
  # EOF
  

  (2) if there is a folder named "workstation - 11.0.0 - and-vSphere - 6.0.0" then move elsewhere as a backup

  (3) make a copy of the folder "Desktop - 10.0.0 - and-vSphere - 5.5.0" and name it:

  Workstation - 11.0.0 - and-vSphere - 6.0.0

  (4) do not forget to add the vmrun path to the variable user: PATH (the vmrun path should be something like this: "C:\Program Files (x 86) \VMware\VMware")

  Now the vmrun commands should work.

  The following command opens the virtual machine:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

• Problems with Flash Player

  About 2 weeks ago I started having problems with the CBBC iplayer (for my girl not me honest)

  He told me to download Flash player. I followed this link, downloaded and everything seems OK. However, I still get the same message.

  I tried different download options, save, run, save, run, and save and I seem to have the same problem.

  As advised by a Web page, I went into settings > manage add-ons > toolbars and extensions > Shockwave poster as installed and activated

  

  I tried the following Web site and I am told that it is not installed.

  

  Any suggestions gratefully received

  Make sure ActiveX filtering is disabled.