I need assistance with VMware Player Manifest.txt file

Similar Questions

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• I need assistance with Outlook Express

  I need assistance with my outlook express. Please

  See www.oehelp.com/OETips.aspx#7 or be more specific, and perhaps we can help you.

  Steve

• I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?

  Original title: driver ethernet

  I NEED ASSISTANCE WITH MY ETHERNET DRIVER.  HOW CAN I GET THIS TO WORK NEW TI

  Download and install it

  The driver should be available in the manufacture of computers site

  Use the snid on a label on the computer to search with while you're there

  Or if the motherboard came with a disc to load and the reader will be on it.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• I need assistance with deactivation Suite CS6.  My Mac Book has been stolen. Can you help me?

  I need assistance with deactivation Suite CS6.  My Mac Book has been stolen. Can you help me?

  Contact support by web chat or telephone to reset the activations.

  Mylenium

• Cano I run several virtual machines with VMware player?

  I can't find a way to launch several machines virtual oin my Windows 7 PC with VMware player. Please advice if this is possible. If this is not the case, what vm product will do the trick?

  Eric

  You can also double-click any VMs .vmx files you want to start.  What I've done is set up the shortcuts in my quick launch for my VMs frequently used toolbar.  Each shortcut target the respective virtual machine .vmx file, is to start.

  Hope this helps

• I need assistance with lightroom 4 - I downloaded the software but I can not access

  I need assistance with lightroom 4 - I downloaded the software but I can't access it. I have windows XP I need to upgrade to windows vista or windows 7? Any help please. Thanks Zara

  Lightroom 4 does not work on Windows XP

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

  You will need to upgrade to Windows 7 or Windows 8. Avoid Vista - It's terrible.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

  I installed it,

  C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
  BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
  VMWare... VMware-player-version 4.0.3 - 703057.exe

  I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
  I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
  What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

  The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
  but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

  I tried the VMWare Player. It works very well.

  What I am doing wrong?

  Hey be based,

  The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

  1. raise some Code by signing keys: keys

  2. download and install Momentics IDE and install

  3. download and install Blackberry Simulator

  4 download and install VMWare

  5 disable all firewall programs including windows firewall

  6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

  7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

  8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

  9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

  10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

  11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

  12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

  13 open a sample application

  14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

  15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

  16. right click on the project file, and then select generate the project.

  17. then right click on the project again and select run as > BlackBerry Application C/C++

  18. If all goes well, everything should work from there.

  Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

  I hope this helps!

• Vmrun fails with VMware Player

  Hello

  I am currently using VMware Player version 7.1.2 and VIX version 1.13

  I want to start my VM using vmrun VIX, unfortunately when I type in the command line, the following command:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

  It will give me something like this:

  Unable to connect to the host.

  Error: The specified version is not found

  I'm doing something wrong or is this a bug?

  For the mention I don't want to not buy or even to install VMware Workstation as I had a lot of trouble with it in the past (I had to do a system restore to get rid of) uninstall.

  OK, managed to make it work, here's how:

  1) there is a vixwrapper config.txt file in the folder VMware\VMware VIX. Make a backup and overwrite the following on the content of the file:

  #@Version-Info
  #
  # VixAllProducts revision mapping for Workstation/Player
  #
  # This file translates product version specifications into the appropriate Vix
  # implementations.
  #
  # Each @Version-Info line has 5 white-space seperated entries:
  #
  #    provider-type: ws, esx, viserver, etc
  #    apiVersion: the apiVersion supported, as passed in from VixHost_Connect()
  #    ipc-type: none, vmdb, vmodl, cim
  #    product-version: the product version string
  #
  #    implementation-directory: the path to the library that implements the
  #          version described by the first 4 parameters
  #
  #
  # The configuration is based on the first 4 fields, which describe
  # the product.  The 5th field is the location.  To force it to try
  # multiple location, the same configuration can be repeated.  Note that
  # list is built in LIFO order, so the latest entry in the configuration
  # will be the first used.  If for some reason that value fails, it will
  # continue through any other matches.
  
  # Workstation 11.1.2 and Player 7.1.2
  ws        17  vmdb  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  player    17  vmdb   7.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  ws-shared 17  none  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  
  # EOF
  

  (2) if there is a folder named "workstation - 11.0.0 - and-vSphere - 6.0.0" then move elsewhere as a backup

  (3) make a copy of the folder "Desktop - 10.0.0 - and-vSphere - 5.5.0" and name it:

  Workstation - 11.0.0 - and-vSphere - 6.0.0

  (4) do not forget to add the vmrun path to the variable user: PATH (the vmrun path should be something like this: "C:\Program Files (x 86) \VMware\VMware")

  Now the vmrun commands should work.

  The following command opens the virtual machine:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

• Dist small linux with VMWare player

  I only want to allow a host workstation run virtual computer images. So for this I need an OS and a player of VMWare. Currently, I used the OEM operating system that comes with work stations. However, they come with vista overload is big enough. Especially when it comes to memory. So I was wondering if there is any document that describes a process step by step (or even a complete iso) with a linux distro and a vmware player installed on it. Where the os and vmware player has been configured to allow the player to vmware the largest amount of resources and where the player was executed near kiosk mode.

  This is of course what VMWare themselves have said would come in the future

  I suggest that you download and install that Xubuntu 8.04.1 codename Hardy Heron, includes long-term support.  It is the variant of Ubuntu Linux designed for low overhead.  Installation of Xubuntu should be very simple in normal cases.

  After that Xubuntu is installed, download and install VMware Player using the packaging variant ".bundle".

  To install VMware Player on Xubuntu, simply run the .bundle from the command line - open a terminal and

  type something like this:

  $ sudo VMware-Player - 2.5.0 - 118166.i386.bundle

  You will need to answer several questions, starting with your password.  You probably want to just press enter several times to select the default values.

• Problems with VMware Player

  Can someone help me please?

  I have two questions, but here's the background. I run a virtual machine using VM Player with Enterprise Server 2008 x 64 as my OS and Windows 7 on the client system. The version of the player that I use is the 3.0.1 and am not able to upgrade to a newer version that the virtual machines created on the new version won't be compatible with the rest on 3.0.1.

  Question 1: I get the following error message:

  "Could not get the driver vmci version: the handle is invalid.".

  You have an incorrect version of the driver 'vmci.sys '. Try reinstalling VMware Player.

  Power DevicePowerOn module has failed. »

  I uninstalled the software and reinstalled again, download the software from vmware download sit and still get the same error message. I also entered in the configuration of the .vm file and changed the settings vmciio:present from true to false. Should I do this?

  Question 2: Now the virtual machine is not recognizing the CDROM. I tried to use the real player allocated on the client system and also let the virtual machine automatically select, the two ways fail. I looked through other forums that show screen shots of how to fix this problem, unfortunately the screen with what I presented is different from that in demonstration.

  Any help would be fantastic, thank you.

  Welcome to the community,

  I don't know, but what you can try is to:

  1st edition.) Can you confirm you changed the setting vmci0.present = 'false' with the virtual machine properly closed - not suspended - and VMware Player closed.

  2nd edition.) In settings of the virtual machine CD-ROM, click on the button "Advanced...". "and enable"Legacy Emulation"see if that helps.

  If the above does not help, please report (attached) file vmware.log of the virtual machine to a response message.

  André

• The simplies never backup? -with VMware Player

  Hello community,

  is it possible to use VMware player form simplies to 'save' like this:

  1. a virtual machine inside directoty create: VM_Win7_Folder

  2. copy and paste the complete record for let say Copy_VM_Win7_Folder

  3 and virtual distributor once the VM_Win7_Folder is infected or something just go and delete the entire folder

  with Windows Explorer and rename Copy_VM_Win7_Folder in VM_Win7_Folder and start VM?

  Is it works too?

  Best regards

  Milan

  Yes, make a copy of the files that make up a virtual machine is a way to save.  Made it with the stop of the guest operating system, not suspended and VMware Player closed.

  You can also use snapshot to revert to a previous State thus solve the immediate problem, but remember to always keep any user of data that is stored with the file systems Guest if operating system you do not lose and the user data when it is necessary to restore a VM from the backup or to revert to a previous snapshot.