Problems with volume on a Windows 7 laptop

Similar Questions

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

  can anyone help

  I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

  Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• Satellite Pro P300 - problem with volume control

  Hello

  I have a problem with my volume control. He worked for the first two months of use value, but now refuses to lower the sound.
  He sort of stutters and actually transforms the sound upward when you turn, he 'left' to drop.

  I markets DEAMS it is a digital control and therefore is not a point 'end' like other laptops. I also noticed others are experieicing this problem.

  Is there a solution to this problem? I don't really like having to manually click on the volume control in the status bar on the window in order to be able to turn the laptop down. Maybe someone can help me?

  Thanks in advance.
  Sam

  Hello

  In your case, I recommend reinstalling the audio driver and controls (with Win XP) Toshiba or Toshiba VAP (if Vista is installed).
  In addition, you should check if the BIOS can be updated too.

  Sorry for this suggestion, but in my opinion that the question must be related software and the fact is that driver sound and the VAP multimedia button controls and the sound card.

  It of certainly worth a try

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Equium P300-16 t - problem with volume wheel

  Equium P300-16 t
  just installed windows 7 64-bit

  having problems with the volume dial if I try and adjust the volume using wheels he iratic even if I click on the speaker in the taskbar.
  If I open ie Notepad and wheel is the round automatically shows "cccbccbcc".

  BIOS update
  Installed hardware 3.0.1.0
  Pretty 4.98.6.61
  Value Added Package 1.2.40
  Reg Patch 1.2

  Hello

  Have you noticed the same problem on Windows preinstalled (Vista?) too much or only on Windows 7?

• External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

  I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

  They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
  I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

  The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

  I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

  Any help would be appreciated.

  Alex

  Are you using the latest driver?
  In my opinion you should not update BIOS.

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• Satellite L505D - problem with mode standby in Windows 7

  It's me again, in the last thread:

  "Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)). "

  The mode 'sleep' worked perfeclty for a few days and it's still gone... What more when I try to enter the mode "sleep" I can't do anything on the laptop, it still works on the white screen and the transformers fan works high speed. In recent days, when the "sleep mode" worked, windows has no update...

  I don't know what is happening... :) Weird problem, isn't?

  It is not easy to say why this is happening. In your last post, you wrote about some updates of windows. Who knows what's wrong there.
  If nothing is done, not even system restore and you want to use the standby mode I recommend you save all your data and install the new OS by using recovery mode.

  With the settings everything's going to be OK but then be careful with updates.

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• I bought Lenovo G550, 6 months before and now I m is problem with key product of Windows because of the striped top, so please tell me how it would be possible to get this product key

  I bought Lenovo G550, 6 months before and now I got problems with my PC and have problem with the Windows product key due to scratch on it, so please tell me how it would be possible to get this product key.

  Behind my laptop, here is a sticker mentioned
  Proof of license
  Certificate of authenticity
  Microsoft
  Microsoft Corporation @2005
  X 15-53803
  and on the bar code is mentioned after the number.
  00.94 - 893-397-158
  Product key. M... 62-8GX88-69-... - f7b

  Hello BHASKARPIYA,

  Product Key Finder programs, if someone advises to use, is found only on your operating system preinstalled a Levono multiple factory facilities and will be of no use in these circumstances.

  You will need to contact Lenovo and request their assistance.

  Or a way around this is to buy a Lenovo recovery DVD to reinstall the operating system or use the built-in recovery Partition containing an image of your OS and reinstall Windows like that.

  No method requires a product key to be entered by you.