Problems with VPN tunnels after the upgrade to PIX 7.0

Similar Questions

• Problems with iframes cached after the upgrade to Safari 9.1

  I have a problem that Safari is caching my iFrames.

  What follows (pseudo) HTML (well, it's an aspx page) is OK in Safari 9.0:

  < html >

  < body >

  < iframe id = "page1" src = "Page1.aspx" / > "

  < iframe id = "2" src = "Page2.aspx" / > "

  < / body >

  < / html >

  in Safari version 9.1, although

  1. caching is disabled in the developer toolbar

  2. I got Mac + R to reload the page

  It will still not send a call to the page 1 or page 2 but rather pull server to an older version of this page.

  I know that I could add? Rnd = $ () or something similar now, however, this aid only in part, from a post (postback) inside the iframe, once again, will be the cached page.

  Others out there who have found a solution? I also didn't put all the prama no cache etc. to avoid that, no luck.

  I tried this also in El Capitan with the same result it looks like to be connected to the update of Safari 9.1 (10601.5.17.4)

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis

• I have major problems with Photoshop CS6 after the upgrade of Windows 8 to 10 of Windows.

  Just upgraded to Windows 10. I had 0 issues before upgrading my system. When I first opened the program I couldn't use any tool correctly because the jury of art was covered in black and flashing/alternating between black and transparent background. I have close to reopen and try again. Now I can't even open Photoshop at all. I get an error indicating that the program has stopped working. From now on, it seems that it is only of Photoshop with the question and not my other CS programs. How can I fix? He couldn't start comes at the worst time in the middle of a project.

  Hi dropj

  Thanks for the update.

  Here are a few steps you can try

  • Check your system must meet all requirements for Photoshop (especially graphics cards) system requirements | Photoshop
  • In Photoshop, check open Cl must be enabled in preferences > performance > advanced settings. Also check how is the VRAM

   

  • Create a new user account on your computer How to Set Up and configure on Windows 10 user accounts

  Then try to work in Photoshop in there

  • Temporarily disable the use of your card from the Device Manager and try to use Photoshop.

  Concerning

  Assani

• Problem with card reader after the upgrade to Windows 7

  Just upgraded to Windows 7 Pro to Vista business and cant get internal or external card reader connection. Not even connect the camera via the USB port works.

  It's a laptop?  If so, look at the website of the manufacturer of the laptop.  You should find the drivers here.

• Problem with URL ReadyCloud after the installation of the FW 6.5 on RN312

  Hello

  After the update to the official FW 6.5, the URL of the ReadyCloud is always on "'https://readycloud-test3.netgear.com/client/en/welcome.html ' not on the production URL"

  What is the correct production URL?

  Thank you

  OK, it's a problem browser temporary files after the update, sorry!

  I have clean the temporary files IE11, now all URLS are corrected with links PROD. I have this url: https://readycloud.netgear.com/client/en/welcome.html

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Error 651 PPPoE VPN connection after the upgrade and reboot

  I have Win7 and a PPPoE VPN connection working perfectly well until tonight after the upgrade and reboot, the VPN just stopped working and gives an error code 651.  I have nothing newly installed.  What was wrong?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Problem with VPN client connecting the PIX of IPSec.

  PIX # 17 Sep 14:58:51 [IKEv1 DEBUG]: IP = Y, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

  Sep 17 14:58:51 [IKEv1]: IP = Y, landed on tunnel_group connection

  Sep 17 14:58:51 [IKEv1 DEBUG]: Group = X, IP = Y, IKE SA proposal # 1, transform # 13 entry overall IKE acceptable matches # 1

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the authenticated user (X).

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, mode of transaction attribute not supported received: 5

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, Type of customer: Client Windows NT Version of the Application: 5.0.06.0160

  Sep 17 14:58:58 [IKEv1]: Group = Xe, Username = X, IP = Y, assigned private IP 10.0.1.7 remote user address

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, fast Mode resumed treatment, Cert/Trans Exch/RM IDDM

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 1 COMPLETED

  Sep 17 14:58:58 [IKEv1]: IP = Y, Keep-alive type for this connection: DPD

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P1: 6840 seconds.

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, data received in payload ID remote Proxy Host: address 10.0.1.7, protocol 0, Port 0

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, received data IP Proxy local subnet in payload ID: address 0.0.0.0 Mask 0.0.0.0, protocol 0, Port 0

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, his old QM IsRekeyed not found addr

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, remote peer IKE configured crypto card: outside_dyn_map

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec processing SA payload

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec SA proposal # 14, turn # 1 entry overall SA IPSec acceptable matches # 20

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, IKE: asking SPI!

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, IPSec initiator of the substitution of regeneration of the key duration to 2147483 to 7200 seconds

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, passing the Id of the Proxy:

  Remote host: 10.0.1.7 Protocol Port 0 0

  Local subnet: 0.0.0.0 mask 0.0.0.0 Protocol Port 0 0

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = notification sending answering MACHINE service LIFE of the initiator

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the security negotiation is complete for the user (slalanne) answering machine, Inbound SPI = 0 x 6

  044adb5, outbound SPI = 0xcd82f95e

  Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P2: 6840 seconds.

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, adding static route to the customer's address: 10.0.1.7

  Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 2 COMPLETED (msgid = c4d80320)

  PIX # 17 Sep 14:59:40 [IKEv1]: Group = X, Username = X, Y = IP, Connection over for homologous X.  Reason: Peer terminate remote Proxy 10.0.1.7, 0.0.0.0Sep Proxy Local 17 14:59:40 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, IKE removing SA: 10.0.1.7 Remote Proxy, Proxy Local 0.0.0.0

  Sep 17 14:59:40 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, drop

  Then debugging IPSec are also normal.

  Now this user is a disconnect and other clients to connect normally. the former user is trying to connect to the site and here is the difference in debugging:

  Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, Y = IP, tunnel IPSec rejecting: no entry card crypto for remote proxy proxy 10.0.1.8/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside
  Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, error QM WSF (P2 struct & 0x2a5fd68, mess id 0x16b59315).
  Sep 17 14:25:22 [IKEv1 DEBUG]: Group = X, Username = X, IP = O, case of mistaken IKE responder QM WSF (struct & 0x2a5fd68) , :
  QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BL
  D_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_
  BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH
  Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, peer table correlator withdrawal failed, no match!
  Sep 17 14:25:22 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, drop

  Here is the config VPN... and I don't see what the problem is:

  Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20
  Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value
  life together - the association of security crypto dynamic-map outside_dyn_map 20 seconds 7200
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  ISAKMP crypto identity hostname
  crypto ISAKMP allow outside
  crypto ISAKMP policy 20
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 7200
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400

  outside_cryptomap_dyn_20 list of allowed ip extended access any 10.0.1.0 255.255.255.248

  attributes global-tunnel-group DefaultRAGroup
  authentication-server-group (outside LOCAL)
  Type-X group tunnel ipsec-ra
  tunnel-group X general attributes
  address pool addresses
  authentication-server-group (outside LOCAL)
  Group Policy - by default-X
  tunnel-group X ipsec-attributes
  pre-shared-key *.
  context of prompt hostname

  mask of 10.0.1.6 - 10.0.1.40 IP local pool 255.255.255.0

  Please remove the acl of the dynamic encryption card crypto, it causes odd behavior

  try to use split instead of the acl acl in dynamic crypto map, and let me know how it goes

• Why can't I read my PDFs with CD player after the upgrade of Apple OS 10.11?

  Two days ago I could read my PDFs with Acrobat Reader DC while running OS 10.9 on my Mac Mini. Today, I upgraded to OS 10.11 (El Capitan), but now I can't read my PDF files. The player will launch, but never to show the document. No error message. No matter if I try to open the PDF file by clicking or using file > open.

  So far, I have:

  (1) removed and reinstalled Acrobat Reader DC.

  2) updated the player via the menu help. 2015.009.20077 running. By the Adobe website, I am told that it is the most recent version.

  3) based on a forum comment, I disabled both plugins Adobe in my folder of Plugins from the Internet. No effect. The replaced. No effect.

  4) based on a forum comment, I registered on the Adobe Web site... and so that's why I can of this type. Confirm my email address. Connected. No effect.

  5) based on a troubleshooting page, I did so that the operating system will be associated with the single CD with pdf files. Not found a problem there.

  How can I fix this so I can read PDF files that I have read two days ago?

  Hi Robert,.

  Try to install the reader here XI: Adobe - Adobe Acrobat Reader DC Distribution and check if you are able to open a PDF file or not.

  Thank you

  Abhishek

• problem with vcenter start after the installation of the heart rate

  Hello. I installed vmware vcenter 5.5 then install vcenter server heartbeat 6.6 and after restart sytem and rename the main node for the system to restart after sytem is som vcenter service startup cannot run example Vmware Virtualcenter server Service cannot start so I can't connet with vsphere vCenter client and cannot start manually that do now what do I do?

  I installed only primarynode and just get the head node clone

  they are both my virtual nodes

  Please help me

  Buffer Cache Hit Ratio is the percentage of sql server pages requested and retrieved from the buffer cache without reading disc.

  It is not necessarily a problem. A way to increase the buffer Cache Hit Ratio might be to increase the memory on the virtual computer. If you feel that the performance is not a problem, you can modify the rule so that it is less than 90% so that the rule is triggered, but Microsoft recommends 90 + %.