ProBook 450 G2: G2 ProBook 450 change SSD HARD drive

Similar Questions

• Change SSD HARD drive and guarantee

  Hello everyone,

  First of all apologies for the bad English, but I'm low so I need to change and to translate.

  I recently bought a HP Envy 15 k046nd.

  He had a 1 TB of HARD drive, but I want to replace it with an SSD.

  I know how to do, but before I go and replace the HARD drive, I had a question about the warranty.

  I've still warranty on the laptop when I said change HARD drive myself? Or I lose it?

  Thanks in advance!

  Hello

  Through 66, 67, Page in this manual:
  http://h10032.www1.HP.com/CTG/manual/c04409752.PDF

  The location of the hard drive is not much customer friendly to be found & replaced. You need to out of drive optical, cover, keyboard, USB to achieve card. I suggest you contact HP and they'll replace it for you.

  Yes, if something goes wrong after / during the replacement, repair or the problems that occur due to the replacement will not be covered by warranty.

  Concerning

  Visruth

• I changed the hard drive of a 4440 probook s and I can not configure the fingerprint reader

  Hi, I have a probook 4440 s, I changed the hard drive due to malfunction, I used paintings General; I can't set the finger print recognition

  Hi Rubio7,

  Welcome to the HP forum!

  Your Probook is a commercial unit and the consumer forum.

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the Forum Commercial/Notebook - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  I hope this helps.

• Pavilion 15-ab057nr: How can I change for one SSD HARD drive and update my RAM?

  Hi, I would like to change the hard drive of my computer (Pavilion 15-ab057nr) for one ssd and also add another module of RAM. The problem is that I've never opened a laptop before, and I don't know where to start, or what should I do after I opened the computer. I don't know if anyone could help me by giving me a guide on how to perform these upgrades, every little detail would be useful. Thank you.

  Hi @IYMF,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the HP Pavilion Notebook - 15-ab057nr and tried to help you! I looked in your question about upgrading the internal hardware. I understand that you are looking to upgrade your hard drive to a Solid State Drive, as well as adding another module of RAM.

  Here is a link to your Service Manual. You can find the specifications for compatible discs on page 49. Please note that this laptop model doesn't support that type hybrid Solid State Drives.

  Maintenance manual, page 55, there will be a list of the size of RAM supported, but also a guide on the replacement of the RAM. Up to 16 GB of RAM may be supported in a 8GB x 2 configuration.

  On pages 46 to 50 of your maintenance manual, you will find instructions on how to remove the rear panel of the laptop, as well as, instructions on the removal of the original hard drive.

  I also found this Vidéo Guide giving visual aid on the replacement of the hard disk. The model of laptop in the video is not exactly the same as the model that you have, but it can provide assistance, however.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• I bought a license LR6 which I installed on a Windows PC, and that works well. I'll change the hard drive of my PC pour an SSD. How do I get por reinstall LR on this new album? I'm going to buy a computer no Mac

  I bought a LR 6 license and I I've installed on my Windows PC slot, I'll change the hard drive pour an SSD, can I use the same license with the serial no that was provided to me and how? I'm going to buy an APPLE Mac computer, can I use the license I bought pour install on the Mac? and how?

  Hello

  You can install Lightroom on 2 computers according to your license.

  You can download it from the following link: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

  Kind regards

  Tanuj

• Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

  Hi all

  I need assistance with Windows.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled pro and the recovery DVD to downgrade to Windows XP Pro.
  I had to change the hard drive, so I try to reinstall Windows 7 from the recovery CD, but it does not work. He said that it is not possible to install this on this machine.

  So I tried with Windows XP CD recovery and no problem
  I'd rather have windows Windows 7 but I do not know how to retrieve
  Last information, the Windows XP CD recovery came with the laptop that Windows 7 was made by the store who sold me the computer.

  Thank you for your help
  Julie

  As far as I know there is not a kind of limitation and if there is no problem with the original recovery for Win7 disc, you should be able to install it on any HARD disk that you use with your machine.
  I upgraded HDD to the SSD on my installation of picture machine and the restore worked without any problems.

  To be honest, it is not easy to say what the problem is here, but the Win7 installation disc is somehow suspect for me. I don't know what model of laptop you have exactly, but somehow, I feel you didn t get original drive Win7. Best evidence is the Windows XP Home edition recovery disk. The prinziple with Win7 is the same and it should works.

  When you use this disk you should have the menu as shown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  This document explains how this works with the original installation disc of recovery.

• NB550D - 10G - do I lose the warranty after change of HARD drive?

  I would like to change the HARD drive in my Toshiba NB550D - 10G for one SSD drive.
  Could someone tell me if I lose my warranty after doing this? I would also like to know evolves from 1 GB ram to 2 GB would indeed lose the warranty?

  Thanks for the help!

  No, I think that you that the warranty would be unaffected if you remove and replace the HARD drive.
  The HARD drive and memory are parts extensible user and replace this part will not void the warranty.

• Pavilion G-6 2209au: Pavilion G - 6 2209au exchange for SSD HARD drive

  Hello I have this have upgraded with 6 GB ram and now want to replace the disc for one SSD HARD drive, I read in the forms some how you need to change the bios when you do so, what measures are necessary for the ssd to function? I don't like about backing up files, I'll use as an external HARD drive. Also I have the apu a4 4300 m and would like to get 10 4600 m cpu is this hard to replace or should I pay someone? Thanks for the support

  That's what you have:

  http://support.HP.com/us-en/document/c03551667

  It is the repair:

  Manual

  From the outset I see that you only have 2 GB of RAM. Very easy and inexpensive to spend at least 4 GB. See page 46.

  The motherboard is the motherboard. There is no upgrade available. However, you have the CPU AMD A4 and you might fall into a 10 - 4600M. See page 83. It would be a major update and only would no treatment faster, but would provide a slightly better video chip since it is a "APU" with processor and video on the same chip.

  Finally, you can exchange the mechanical drive to a SSD drive. The upgrade of the speed would be very noticeable.

  That @banhien meant, however, the cost of this can equal or exceed a new laptop. and almost certainly will if you need to pay a technician to do it. The first update I is the RAM, then the SSD and then the last would be the CPU. If you need any help post more come back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• iMac mid-2010 for one SSD HARD drive replacement

  Hello

  After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

  The iMac in question is a model 27 "2010.

  Here's what I have on order:

  • Samsung 850 EVO 500GB SSD
  • OWC online Thermal Sensor HDD upgrade 2009-2010 - https://www.amazon.co.uk/gp/product/B017OEQKV2/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1
  • Kingston Technology 2.5 to 3.5 inches support and live for SSD - UTF8 & PSC = 1 https://www.amazon.co.uk/gp/product/B00DGL2X7I/ref=oh_aui_detailpage_o00_s00?ie=
  • 2 x cable high quality Original SATA 6 GB/s 3 - Gigabyte https://www.amazon.co.uk/gp/product/B00BBYOD3E/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1

  I also ordered suction cups and relevant screwdrivers.

  I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

  Cheers in advance

  Ian

  Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

  The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

  Good luck

  Sam

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers

  Hello

  My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP before changing my HARD drive + tips on replacing drive HARD would be also useful. There is no service HP here so I have to do it myself.

  Thank you, I finally solved the problem by creating a partition under Advanced options and recovery of Windows drive, and you select Reset. Search for main windows and use Windows system image did not work with the version of Windows OEM.

• Pavilion g6-2330ee: SSD hard drive

  Hi all

  I have HP laptop Pavilion g6-2330ee.

  My quastion is: my laptop supports the SSD hard drive?

  Thanks to you all.

  Hello

  Yes, he does. Nothing can stop it. Please use ONLY know brands.

  Kind regards.

• Change the HARD drive in the laptop Satellite P10-304

  I bought a new hard drive for my laptop toshiba satellite sp10, can someone tell me were the hard drive is in the laptop, so I can change it as it does not tell you in the instructions booklet
  Thank you
  jm75uk

  Hello

  For some portable models change HARD drive is very simple and not complicated. Change the HARD drive in your case will be not so easy, and in my opinion, you should contact the service partner. I don't know how old is your laptop, and if the warranty is still valid, but as Tobi said if you open the Briefcase with laptop computer on your own, you can lose the warranty.

  I don't know, but the HARD drive should be placed somewhere under keyboard because on this model there is no coverage of HARD drive in the lower corner.

  Good bye

• External SSD hard drive not detected by Airport Extreme/Time Capsule

  Hello everyone, I have the following problem:

  Framework

  -J' bought a 1 TB Samsung SSD 840 EVO internal media.

  -He is locked in a case of badges and used as an external hard drive

  -J' have an Airport Extreme (5th generation)

  -J' have a Time Capsule (4th Gen)

  -My MBP detects the SSD external hard drive when it is connected to the USB port and works fine

  Problem

  -I connect the external SSD hard drive to the USB port on both TCapsule and AExtreme, but the HD is not detected directly (USD and with powered hub of USD)

  -HD was formatted as OS x journaled Extended

  -J' tried smb and cifs via 'connect to server', but does not work.

  Any help will be greatly appreciated.

  Juan

  Unfortuantely, Apple did not update the firmware on the USB key (it is still 2.0) port on their routers for a number of years.  As a result, new USB 3.0 drives may or may not work with airports.

  Yes, we know that USB 3.0 is supposed to be backward compatible with USB 2.0 in theory, but theory does not always work in practice.

  If your drive is formatted as Mac OS extended (journaled)... also called HFS +... .and you have tried the drive with and without a USB hub powered and the reader will not be displayed with you check using the AirPort Utility disks tab... then you have one of a number of readers who do not work with routers from the airport.

  I just checked a new LaCie USB 3.0 drive I have here. It works perfectly with a Mac, but it appears not at all when I connect it to the USB port or a powered new AirPort Extreme or new Time Capsule directly, or by using a USB hub.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.