ProBook 4430 s Boot problems

Similar Questions

• can I get an upgrade for hp probook 4430 gpu s

  I have a hp probook 4430 energy efficient model with intel 3000 hd is be possible to update my graphics card to one of the suppliers of gpu nvidia or amd?

  Hello:

  4430 s is only available with the Intel UMA graphics card, so there is no motherboards, that you can change to include the AMD video that is optional on the 4530 s.

  Please refer to page 7 of the quickspecs at the link below:

  http://h18004.www1.HP.com/products/QuickSpecs/13948_na/13948_na.PDF

• Boot problem - which means 'nothing' begins or displays on the screen

  Boot problem - which means 'nothing' starts or displayed on screen (white, black screen).  Do 'hard boot' to the CPU, then Ctrl Alt Delete & to get to the Task Manager.

  In the process, I see the problem of the wercon.exc process.  Once the process is complete, I can use the computer.
  What is the "fix" for this House of Vista Have.
  Thank you

  Hello

  You can view these methods:

  Method 1 : run Startup Repair and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

  Method 2 : run system restore and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

• ProBook 4430: Windows 7 upgrade-> Windows 10 (HP ProtectTool problem)

  Hey everybody,
  
  I ran into a problem while improving my PC to 10 Windows and he said I need to uninstall HP protect tool which is also connected to 6 other products and I need to remove/uninstall all of them.
  
  What do I do and is it safe to uninstall?

  I can it download it again once I've upgraded to Windows 10 because I liked the face recognition software.

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  Yes, you must decrypt your hard drive and you must uninstall the security software as HP tools protect.

  In fact, Protect tools is old version. The most recent version of the same software is called HP Client Manager Security.

  HP Client Manager (Protect tools) Security is just 'control center' of other applications.

  You must uninstall all, finally protect tools, restart the computer.

  Then, start the computer and connecting to Windows.

  Do not attempt to remove the software, unless you are sure that you can bypass the login screen and boot on the Windows desktop.

  You must open your security HP Client Manager / protect tools.

  Authenticate with the Windows password or another option.

  - First, if it is available in your version and if you - go to drive encryption and make sure that you DISABLE disk encryption hard while the disc gets decerypted. This can take a long time (hours or more to complete).

  Reboot / restart the computer

  - Second, if available in your version and if the case on your part, go into identifying information - fingerprints of the article and delete data

  You can see how I created by these screenshots (these are for the most recent version, not to protect tools) > https://onedrive.live.com/redir?resid=73EA0FA259008E8! 107 & authkey =! AEyZq_GEDdnNQnE & ithint = file %2 c

  When you're ready, you can try to uninstall all and restart the computer eventually.

  Finally, you can upgrade to Windows 10. Here are a few tips and tricks > http://support.hp.com/us-en/document/c04730900

  I'm afraid tools protect HP and HP customer security Manager are not compatible with Windows 10, not officially.

  In view of the information >here<, officially="" supported="" are="" win="" 7="" and="" win="">

  Windows Hello is free available in Windows 10 facial recognition function > http://www.windowscentral.com/how-set-windows-hello-facial-recognition-windows-10

  Drive encryption (Bitlocker) may be also available according to the edition of your Windows.

  I would like to know if it works for you. Please, give your feedback.

• 4430 s ProBook: probook 4430 s Bay undetected on the bios upgrade

  Hi all

  I have a problem about 4430 s probook boot configuration. I just bought an ssd drive and I want to make a double system with two disk by adding the ssd via a caddy on the portable player. The problem is that I don't see the "notebook" option upgrade Bay on the startup command option. I already activate the laptop upgrade Bay hard drive as suggested on the next page, but I still don't see the Bay of laptop computer upgrade when I Press f9 and f10 at startup. Any suggestion or information how to fix this?
  Thanks in advance for your help.

  http://Forum.NotebookReview.com/HP-business-class-notebooks/586353-HP-EliteBook-2560p-owners-lounge-...

  ERICO, exchanging, I'll be able to boot from my SSD, but I don't always get to choose which drive I want to start, right?  That's right

  If you install Linux on the disk hard inheritance after Windows 7 has already been installed on the SSD drive and use the GRUB boot loader, it should be doable.

• HP Probook 6570b: unusual startup problem

  When my WD Mybook 1130 is connected to a USB 3.0 port, my Probook will not start.  Here is the exact sequence where this happens:

  I do turn my notebook and plug the WD drive.

  The drive is recognized, installed and is fully functional.

  I put my laptop in mode 'sleep' (or I stopped it)

  When I press the power button on the laptop, the splash screen appears, with "Press esc for boot options", and it stays there, non-functional.   It does not start or respond to keystrokes - except the power button, which he died.

  If I unplug the WD drive, then press the power button, the laptop starts normally.

  So, what is a problem of HP, a problem of USB 3.0 or a WD Mybook drive problem?

  I understand - and I have the same situation.  If I connect my external WD passport, the laptop does not start.  But if I connect other readers, it will be.

  There is a conflict between the WD drives that prevents laptops to boot.

  Sorry, but I have been unable to find a "solution" for this.

  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• Missing drivers for my ProBook 4430 Windows 7 Professional

  I can't connect my Probook s 4430 to external monitor. I also have problems on the following device drivers. Are theDo I connects? need to download a new driver? What to download?

  All I want is to be able to use a larger screen.

  Port_ #0006.Hub_ #0004

  USB\VID_03F0 & PID_311D & REV_0001

  USB\VID_03F0 & PID_311D

  PCI Slot 2 (bus PCI 35, device 0, function 0)

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  PCI Slot 2 (bus PCI 35, device 0, function 3)

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C

  PCI\VEN_197B & DEV_2393 & CC_088000

  PCI\VEN_197B & DEV_2393 & CC_0880

  Port_ #0001.Hub_ #0003

  USB\VID_138A & PID_003C & REV_0086

  USB\VID_138A & PID_003C

  You are the very welcome.

  You also need the graphics driver for the PC.

  4430's can come with two types of graphics.

  Standalone Intel

  AMD/Intel switchable graphics card.

  It should be fairly easy to understand what your laptop graphics adapter specific did do you the following...

  Go to Device Manager and click to expand the category graphics cards.

  If the graphics driver is not installed, you will see a labeled device adapter VGA Standard.

  If your laptop is the Intel graphics card, you will see a VGA Standard listed adapter.

  If your laptop computer is the AMD/Intel switchable graphics, you'll see two adapters VGA Standard listed.

  Please tell me what you see here, and I'll post the correct graphics driver.

• HP Probook s 4320 - wifi problems

  Thanks in advance for reading and pay attention to this frustrating problem I have.

  I use a HP Probook s 4320 and just reinstalled Windows 7, as well as all pilots & assistant wireless etc.

  At home, I have a broadband thanks Talk Talk (UK), through a router D Link N ADSL2 +, who works currently with no problem on a number other devices, laptop (Win Vista) Samsung, PS3, iPhone etc.

  I've used the wifi on the laptop with no problems.

  After reinstalling and coming to set up my wifi network, it recognizes my network and many others around me, I choose mine & try to enter my passowrd - unauthorized, then press the button on the router & go through it - everything seems to work ok.

  After you connect to the internet for about 10 minutes, the connection drops and when I click the icon at the bottom of the taskbar wireless, my network is displayed at the bottom of the list with a red X next to it and I can not connect.

  When I try, it says: -.

  'The settings saved on this computer for the network do not match the requirements of the network.

  When I right click on the wireless icon and select '' problems of disorder shoot, '' he says: -.

  "Check your wireless security type.

  I can connect to the internet without any problem using the wired connection through the router.

  When I go to security settings, they are:-

  -WPA2-Personal security type

  -Type of AES encryption

  Network - correctly-entered security key

  Please could someone help me to be able to use wireless correctly, I would be very grateful!

  Thank you.

  Hello:

  What model of wireless card you have (make and model)?

  There must be a newer there than in 2009 driver.

  It's probably the main issue.

  After you let me know that you install the updated driver, delete the network connection and it restore from scratch.

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• ProBook 650 G1: Encrypted ProBook 650 G1 boot - error of BCD

  Hello

  We have a Probook G1 650 encrypted with winmagic that won't start. Is imperative to save the data from the hard drive.

  We also have the encryption key, but we cannot load because when the screen to load the file there is no way to locate the file.

  If you put the hard drive on usb adapter we can not see, obvious, because is encrypted and so we can't change the bcd file.

  Please give us a solution!

  P.S. in our society, we have 30 laptops (probook 450 and 650) and with 50-60% of them we had this problem, is very frustrating, but now the user who works on this laptop has not record data on time.

  Thank you

  The work units, to update HP customer Security Manager and HP Drive Encryption to avoid the mistake of BCD. Back up the data before the update.

  HP customer 8.3.17.2042 Rev.A Security Manager (3 December 2015) - SP74101

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_158015_1

  Player HP encryption 8.6.16.42 Rev.A (15 June 2015) - SP71555

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_156274_1

  For units with the BCD error, you must call the HP support team and that we owe to them correct the mistake of BCD. After complete correction, you must update these software.

• Satellite PRO C660 - 1LR Boot problem

  Had this laptop for a little less than 2 months, was in course of running really slow so I backed up my data and do a factory reset, during the reset of the machine restarts automatically several times. After about 6 reboots everything I got a black with a cursor screen (ctrl + alt + delete does not work), the cursor moves but nothing happens, I guess that something was wrong with the recovery so I id try again, only to find the menu F8 at boot is no longer list of computer repair. Ive tried to boot from a CD but when I press '0' and press F12 when prompted, nothing happens, I'll be just the screen windows mem test.

  Also, trying to get into the bios, I press F2 when prompted and the message very quickly becomes "HDD Recovery" then continues towards the screen of windows mem test.
  So im a bit stuck now, I tried to remove the power and battery all night, but that did not help either.

  Any suggestions how to get this working again?

  Post edited by: ma_anse

  Hello

  You mean that you cannot access the BIOS?
  To access the BIOS, you will need to press F2, immediately after pressing the power button. You can press F2 repeatedly in the line to make sure it worked.

  > Ive tried to boot from a CD but when I press '0' and press F12 when prompted, nothing happens, I just go back to the screen of windows mem test.

  In order to boot from recovery disc, just press F12 (don t press the 0 key). This should allow the start on-screen menu. Then you may choose the CD/DVD drive as the boot source

  But this sounds like a hardware problem; I think memory or HARD drive problem so maybe that these two parts must be checked also.

  There is a nice tool called Drive Fitness Test that allows to test the HARD drive for errors

• Satellite L50D - Boot problems after replacing the hard drive

  I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

  I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

  I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

  I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

  I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

  This seems as bad as Apple to lock people in.

  So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

  I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

  TIA.

  Hello

  In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
  You said that the laptop fails to start up often to the Toshiba start screen.

  The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
  I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

  From my point of few, this could be the reason why the system cannot be started.

  Another important note:
  The 8.1 win requires enable start secure as well as the UEFI boot mode.
  Therefore, you must enable both options in the BIOS.

  Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD

• 10.11.4 boot problems - black and white death

  Hi people, write here after a weekend of failed attempts to get my iMac 27 "2009 to recover.  I see there are many good suggestions out there on this general problem and I am hoping someone can give some specific advice, as I am now out of options.

  The problem started when I first noticed the screen was all black, but the cursor to move.  I think the problem started 20 or March 21 since the last backup Time Machine was to the 20th.  I had seen this occasionally over the years and so just turned off and restarted.  This time it got stuck on the white screen with the Apple logo and progress bar at halfway.  Finally reading the forum that I realized that I could actually blind the connection by pressing the right keys and hard drive noises I could say it was starting up my apps.  But the screen remains blank, just the cursor moved.  I even tried to remote into my Macbook but that just brought to the top of the black screen too!

  That's so the State of the rest across machine try the following:

  1. Tried to reinstall the OS 10.11.4, it installed OK, but on reboot I have come back to the white screen of death.
  2. Tried Time Machine backup recovery, twice, first go to the last point of restoration, then among a few days earlier which was 10.11.3
  3. Wiped my Bootcamp partition and installed 10.11.4, showed the first home screen, and then it would freeze.  I could access it from secure boot, but could never get the boot on a regular basis at work, the screen remains white death.
  4. Secure boot works on both partitions, but which is as far as I can get it.  Start, I tried the suggestion of delete some items in the Library/Extensions folder, but that did not help.
  5. I also tried to remove the power cable for a minute and restart.  And the thing with now the key Alt Cmd (?) and P and W to erase the memory.  But no help.
  6. I tried to run the diagnostics of material that came on the boot floppies, CD Rom drive would turn a few times, but would not read the disc for some reason any.

  I think that's it, maybe I tried a few other permutations, but it has been a long weekend, and it's all beginning to fade now.

  Since all the restorations did not work it feels like it may be a hardware problem, but it's so consistent in where it fails / stalls on startup and safe mode works OK, it always makes me think that it may be a software.  There is a flash on the right screen to where it crashes on the bar, progress which makes me wonder if this might be the card or display driver problem, but really guess right now.  One last thing that I might have to try is a full erase of all partitions and create a USB stick to boot from.  But I am quite doubtful that it works in light of all other alternatives, I tried.

  Additional ideas would be very appreciated, I know that I had the machine for a long time and many would say it is time to upgrade, but I'm not quire ready for this yet, it really worked great, just a little slow on the restart of the (who fortunately have been rare so far!)

  Hi Mart:

  Sorry to hear about your problems. Looks like you have tried many options.

  Here are a couple more. You will get maybe lucky.

  Computer does not start:

  Try reseting NVRAM. How to reset the NVRAM on your Mac - Apple Support

  Then try reseting SMC. Reset the management system (SCM) controller on your Mac - Apple Support

  Then, try a safe boot. Safe mode try if your Mac does not start-up

  Also, see this help file. If your Mac will not turn on - Apple Support

  Also, see this help file. The elements of opening and start-up troubleshooting

  Also, see this help file. Top 10 tips for troubleshooting Mac startup problems

  To tackle the Macs that always start mode safe. Tackle Macs who always boot mode safe

  Splash screens: on the screens you see when you start your Mac

  Take a go-Genius Bar: Genius Bar

  The assessment will be FREE.

  Kim