ProBook 6360 SSD performance worse b specified by the SSD manufacturer

Similar Questions

• ProBook 450 SSD of G1 problems

  Hi all that I just had a Probook G1 450, Walker has problems after replacing the HDD with a SSD.

  Windows installed just fine, but as soon as I installed some drivers, mostly related to the media storage to intel and ETC I get a BSOD with the stop 0x0000001E, and I can't solve it.

  Any help would be appreciated.

  Thanks in advance.

  Hi Mrstenter,

  In fact, the problem is caused by the HP 3D DriveGuard driver, if you skip the installation when you have an SSD installed, giving no problem. FYI the SSD, I used was a MX1000 Crucial 256 GB. And after I jumped this instalation driver laptop currently works perfectly.

  Thank you

• What causes the "specified operation cannot be performed when no device in the task.

          using (task NationalInstruments.DAQmx.Task = new NationalInstruments.DAQmx.Task ())
  
          {
  
            task. Timing.ConfigureSampleClock ("", 1000, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 2);
  
            task. DIChannels.CreateChannel ("PXI1Slot6/Port2/Line3", "", ChannelLineGrouping.OneChannelForAllLines);
  
            task. Triggers.StartTrigger.ConfigureDigitalEdgeTrigger (triggerLine, DigitalEdgeStartTriggerEdge.Rising);
  
  DigitalSingleChannelReader reader = new DigitalSingleChannelReader (task. Stream);
  
            drive. ReadSingleSampleSingleLine();
  
          }

  Why the code above throws an exception DAQmx with message:

  "Specified the operation can only be performed when there are no devices in the task."

  task name: _unnamedTask<2>

  "Status code:-200477"

  There is a device in the task.  I'm trying to PXI1Slot6 (map of IO 6535) to enter the 2 samples off Port 2 line 3.

  Hi CurtisHx

  Thanks for reporting this. I agree that the error message returned by the driver is very unclear and fails to a user of the API provide enough information to determine the cause of the error in the code. In addition, it seems that we don't document the correct order of operations to set up a task well (the best thing we could find was the subject of tasks in NOR-DAQmx , who actually seems to imply that the channel configuration and their calendar can be made in any order). We are producing several bug reports, to fix / improve the following:

  • The error message returned by the driver to the API.
  
  
  • The help topic for the tasks in NOR-DAQmx.
  
  
  • The documentation of the specific method provided with the NOR-DAQmx .NET API.

  To clarify the error, it seems that 'peripheral' in ' specified operation cannot be performed when no device in the task "is in fact reference to the channels configured in the task. At this point, I'm not sure what "device" can be applied to other entities in the DAQmx driver software, but I'll post at the time where I have an error message created by the development team working on it.

  Best regards,

• HP Probook 6360 b: Hp Probook 6360 b base system device driver

  Hi, in my device under other devices Manager his watch that miss me the driver of the basic system for my Probook 6360 b, when I try to install via the internet search, it finds but installion driver fails, and when I try the cd that came with the computer, he finds nothing neiter.

  Any ideas?

  Thank you very much

  Hello:

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5045582&swItemId=ob_116003_1&swEnvOid=4059

• Remove all lines and insert them into Oracle can make performance worse?

  I m working in a project that I need to make a batch update regularly (every 4 months) of excel files. These files have doesn´t excellent key in their ranks.

  The development of a code that deletes all lines and inserts the entire base again is easier than one who checks in all the ranks of its primary key and if necessary update. (sometimes may be a key to 5 columns).

  My question is: if I delete all the rows in the tables of the insert it again, it will cause tablespace fragmentation and in a future loss of performance?

  Is there a way to avoid this?

  Thanks in advance

  Alexander

  This response helped me a lot.

  Thank you all

  Remove all lines and insert them into Oracle can make performance worse? -Stack overflow

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• When my computer starts message on the desktop is: "' Office impossible to load or run C:\Users\Ray\AppData\Local\Temp\ccrss.exe' specified in the registry" "

  "office impossible to load or run C:\Users\Ray\AppData\Local\Temp\ccrss.exe' specified in the registry."

  Make sure that the file exists on your computer or remove the reference to the registry. »

  Never had this message before. Sought a "registry". not been found. Looking for a 'Temp\ccrss.exe' not found.

  What should I do now?

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes to your computer?

  I suggest you to follow the methods and check.

  Method 01:

  Step 01:

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 02:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run Microsoft safety scanner scanning from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• VCB Incompatible device specified for the '1' device support

  I'm trying to use vcbmounter to perform a full backup of a virtual machine. After the snapshot is run, I get the following error:

  2009-02-06 14:54:56.503 "vcbMounter" 2428 error: failure hot remove SCSI disk: Incompatible device support specified for the '1' device.

  2009-02-06 14:54:56.503 "vcbMounter" 2428 error an error has occurred, cleaning...

  I've narrowed the problem to a second disc which I configured on 90% of my virtual machines. The second disc is where I placed the OS swap file. If I move the swap file and remove the second SCSI disk, hey presto, it works.

  VCB does not save the second SCSI disk? Is this something unique to me? Any advice would be helpful. Thanks in advance!

  Your problem is probably have two files vmdk bearing the same name. This happens usually if the second disc is on a different data store. You must rename the second disc with vmkfstools.

  Dave

  ************************

  The surest way for the world to be destroyed, most experts agree, is by accident. That's where we come in; We are the professionals. Cause us accidents.

  Nathaniel Borenstein

• Is it possible to change the behavior of the URL bar so that it performs a DNS lookup on the entry that is clearly not a website? (I want to search :)

  Chrome, for example, does not perform a DNS lookup if the entry is not a valid Web site, instead, it searches in the default search engine.

  I think that if the bar URL have behaved in a similar way, it would increase by many user experience. I really like Firefox and using it for a few years, but these are things that really annoy me as a developer.

  The one big flaw that I find in the Chrome version of manages the entrances to bar URL is that one cannot add custom Chrome of top level domains, which makes working with top level domain websites internal quite annoying.

  See also:

  • http://KB.mozillazine.org/Location_Bar_search
  • http://KB.mozillazine.org/keyword.enabled
  • https://support.Mozilla.org/KB/location+bar+search

  You can also add a ((one letter) to a search engine keyword and use the keyword in the address to select/use bar a specific search engine.)

• Performance of Windows 7 and the differences of 32 and 64-bit...

  Here you can see the performance from one version to the other differences in the assessment of the experience with Windows 7 at his little two versions 32 and 64 ultimate.

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4QUm7ylI/AAAAAAAABcE/aV82zFxifh8/S1600-h/Sistema64Bits.PNG

  http://1.BP.blogspot.com/_vQInzvdaQQ8/Ssp4MsJ27PI/AAAAAAAABb8/XSmlARqrcEQ/S1600-h/32bitsimage.jpg

  Post edited by: merlinpat

  32-bit operating systems are limited to 3 GB, but the performance is similar in Internet/desktop applications every day.

  If you do a lot of creating media (e.g. video coding high definition or music production), 64-bit would be a better option.

• Sense of "component of this VI connector is not a part of the connector that is specified by the user."

  That means the following message from VI Analyzer: "part of connector of this VI is not a part of the connector that is specified by the user."?

  The VI it references has 4 connections: 2 in. and 2 outputs. He was selected from a template.

  Everywhere where the VI that it references is used is relinked and properly connected.

  While it has been warned?

  As it says, this is just a warning.

  Many programmers standardize on a small selection of models of connector. VI Analyzer will tell you if a different connector pane is used. One of your screws apparently uses a connector part 2 x 2, which is not used very often. (Example (1) it must be changed if you need connectors later, (2) it does not match the gap-type-in and error-out lower terminals, (3) if it is mounted in series with subVIs most popular models, the son will have elbows and things not the line-up, etc..)

  Two choices:

  1. If you are really in love with the part of connector 2 x 2, add it to the configuration of the parser as a reason accepted.
  
  
  2. Stick to a more standardized connector component, even if not all the connectors are currently used.

• the Boolean value 'specify by the expression' in the call of the sequence

  Hello

  Is it possible to set the checkbox "Specify by the expression" in a statement?

  The statement should be in the cleanup.

  If Yes, what is the line of code to write? because this variable is not

  the window variable so I have no idea on how to fix this Boolean value.

  Thank you

  An expression similar to the following should work:

  "" "RunState.Sequence.Main ["myseqcall"]." Module.AsSequenceCallModule.SpecifyByExpr = true

  -Doug

• Edit event managed by this case in LabVIEW 2013 does not show the specifiers of the event, Event Sources and events on screen resolution 800 x 600

  Edit event managed by this case in LabVIEW 2013 shows not specifiers of the event, Event Sources and events on screen resolution 800 x 600.

  As far as I know, the list of supported resolutions is determined solely by the graphics card. It is possible that one used by the PC supports only 800 x 600 as maximum resolution, even if you plug an external monitor.

  Like Dennis suggested, the recommended option would probably be to develop on another PC and only deploy an executable for the industrial PC. That's what we do with our systems (although not because of this problem, but because it makes sense. There absolutely no need to have the IDE installed in most of our systems).

  Other options:

  1. See if you can get an update of the driver from the manufacturer to solve this problem.
  2. Plug a USB Monitor with its own driver.
  3. Try to hide the taskbar and make the smaller title bar in the hope that the bug manifests.
  4. Try remote access in the PC. I think that some remote access programs allow you to specify custom resolutions that are not affected by the original drivers. Remote Desktop seems to be a likely this option even if it has been awhile since I've used it.
  5. Check the BIOS. I saw at least one industrial PC where there was some settings in the BIOS to control the resolution, but I don't remember the details, and it was quite limited. I think that in this case, you can change the resolution, but then the image does not fill the entire screen.

• Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW FPGA.

  Please help me for this problem "error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the setup of LabVIEW FPGA.»

  Look for the error on the Web site of or or on the forums. Take a look at the following links:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=381394&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=205754&requireLogin=false

• Start Impossible load or run a file specified in the registry.

  On startup, I get a message indicating "Impossible load or run a file specified in the registry" and "make sure that the file exists on your computer or remove the registry." How can I access the registry to delete this file? File is a file to user\appdata\local\temp.

  Hi DottieCalli,

  You can try to check if the file is displayed in the startup items. If so, you can try to disable the option to disable the file in the startup items.

  For more information, you can consult the following article:

  Using the System Configuration

  If please reply and we will know the results.

  Hope this information is useful.