ProBook 6455 b: Probook 6455 b LCD replacement / upgrade?

Similar Questions

• Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

  Original title: connect/disconnect sounds in the background

  I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes.  It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that.  I can't find any evidence of the old router on the computer anyway.  I hope you can help me!

  Hi Danielle65,

  You can try the following steps and check if it helps.

  Method 1:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)

• Probook 4530 s & guaranteed replacement hard drive

  Hello.

  I would like to know if the warranty is void if I replace hd with a ssd in a Probook s 4530.

  Thank you.

  Hello:

  Install a different hard disk will not void the warranty, but HP will not support the SSD under the guarantee of the laptop.

  Paul

• HP ProBook s 4540: HP ProBook s 4540 - keyboard replacement - advise

  Have a 4540 s HP from my neighbor who dumped some broth on the keyboard.  The P and O do not work, the K - L -:- and space sometimes work, are sometimes stuck in down position.  At this stage, it is virtually unusable.

  The serial number is 2CE338382Z and the Code of Prod C9K7OUT #ABA.  The insignia claims that it sports an Intel's I3.

  So, I see videos here describing how to remove and replace the keyboard.  It does not seem too complicated for me - I'm ready to take the plunge.  If someone has done this before, you have some tips on where are the land mines?  Or is it pretty much direct?

  And where exactly I think the correct keyboard replacement part?  What I have to disassemble the unit first and look at a part No. on the entire keyboard?  Can't seem to locate the function parts here.  Can someone link me please?

  Thank you all.

  Hoib

  Hello
  
  HP part store - please input here part number with your country:
  Product number: C9K70UT
  Description: HP ProBook 4540 s Notebook PC (ENERGY STAR)
  
  ->
  http://PartSurfer.HP.com [here the keyboard part number is available]
  
  Find it in retailers online through Amazon or eBay.
  
  Page 70-72 in the manual States the replacement procedure:
  http://h10032.www1.HP.com/CTG/manual/c03758231
  
  Concerning
  
  Visruth

• HP probook 4520 s ram replacement for

  I have hp probook 4520 s

  running windows 7 ultimate 64-bit

  Intel core i5 cpu M460 2.53GH

  RAM 4 GB

  ATi mobility radeon HD 4300/4500 series graphics card

  Dedicated video memory: 512 MB

  1719 MB shared system memory

  total avalible: 2231 MB
  My quistion is: if I upgrade my RAM to will of 8 GB that improve my performance of the graphics card? specially for the games?

  and there at - it something I can do to improve the performance of my game?

  This will help a little bit, but not enough to make unplayable games playable. The only thing you can do is to make sure that you have the latest drivers and the game settings a lower value.

• HP Probook s 4540 E3V00UT: replace the motherboard

  A child of friends spilled water on his laptop computer, make the card mother toast.

  The plug: motherboard 683493-001, Raedon HD 7650 M (689493-601), processor Intel i5 3340 M

  I am looking for a cheap solution

  Can I replace motherboard with a 683494-001 ogical and use the 3340M?

  I'm surprised of this motherboard is cheaper because it is the video version of 2 GB, but otherwise the same Board. No WIndows embedded key Code so you will need to reinstall the operating system and have a valid key Code. But ultimately, yes it will adapt instead the original Board and accept the CPU, wi - fi memory card, etc.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Probook 450 G2: SSD & RAM Upgrade

  Hello.
  
  I want to improve my drive 750 GB (5400 RPM) to Samsung EVO SSD 250 GB and 8 GB to 16 GB of RAM, but I don't know which model will fit for my HP probook 450 G2 Intel i7 5500U 2.4 GHz. Maybe someone help me?
  
  Pictures of my back of pc:
  
  

  

  

  @Lumiatrix

  Buy the same type of memory you have in the picture.

  The SSDS works perfectly.

  You have the option to add a card SSD m2 also.

  Your manual here.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04763183-2.PDF

  HP ProBook 450 G2 portable PC - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=6943826 & MEID = BFEAE0A5-A6BD-4541-BA9F-32A9F9567EFA

  REO

• HP Probook 4720 (WD911EA): which to upgrade my Probook 4720 8 GB of RAM and what HARD drive?

  Hi all

  I need to replace probook 4720's my HARD drives (products cod WD911EA) and upgrade of RAM 8 GB and I want to be sure to buy the components of rights. Actually the pc run with 2 x 2 GB RAM DDR 1066.

  I can replace it with 2 X 4 GB SODIMM 1333 PC3-10600 3 9-9-9-24 DDR v1.5 (for example Corsair? in our site, it seems that compatibility is matched). Can you confirm this info for my product of cod?

  Instead, to replace hdd, can I mount a HARD drive SATA 6-500 gb 7,200 rpm and 32 MB of buffer?

  Thanks a lot for help

  Frag.

  Your manual here.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=4145330&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Page 3.

  Your videos to remove/replace here.

  http://h20464.www2.HP.com/results.htm?SID=4145330&MEID=16F1A3F8-9C13-444C-85D5-4B4E0A7E1A8B

  REO

• ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10

  Hi all

  There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.

  I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.

  A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.

  But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.

  I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.

  Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)

  Volker

  The laptop is to date, according to the release of Windows 10.

  Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• Qosmio F55 - LCD replaced and brightness controls are reversed back

  Hello

  the LCD for my Qosmio F55-Q502 cracked and I ordered the same room and when I installed it, everything works fine and everything but the brightness up and down are reversed. As Fn + F6 makes more brilliant while Fn + F7 makes it more dark? The first that comes with it is a lp154wp1 (tl) (e1) but I had is a lp154wp1 (tl) d1).

  Does anyone think that the bit of a variation of the model can do reverse controls? Even on Windows when you cursor to the right BRIGHTNESS, it darkens and to the left, it illuminates. For anyone else who needs information on their Qosmio F55, the original is also a lp154wp1 (tl) (e1) and also known under the name of lp154wp1 (tl) (a3) which is written on the Board of the lcd screen. The replacement lp154wp1 (tl) (d1) is also known as a lp154wp1 (tl) (a2) also wrote on the lcd dashboard

  Any suggestion or help would be appreciated!

  Hi hulkster,.

  Where you have ordered the new view and it are a Toshiba original spare part?

  If yes I would contact an authorised service dealer or the store where you bought it. In my opinion the screen is not 100% compatible for your model. This would also explain the different reference numbers you posted

• Re: Satellite A500 LCD replacement

  Hi all

  Ive managed to damage the LCD on my A500 (long story) and am needing a new. Anyone know how I am for and which would you recommend in Melbourne to do the job by replacing?

  Thank you
  Adam

  Hello

  to be honest, it is quite expensive to replace laptop Lcd as a motherboard. Before I had a laptop with LCD broken and used the external monitor connected. You should contact Asp to get qualified service.

• Satellite L500 LCD replacement screen (PSLJ0A - 01 K 013)

  Hello

  I need to replace the LCD for my Satellite L500 PSLJ0A - 01 K 013, but I have trouble finding a LCD 15.6 "appropriate. I am trying to find online, but it seems that the Web sites that sell screens LCD do not have my laptop model. It will be the same for all the series L500?

  Thank you.

  > Will it be the same for all the series L500?
  I think so. If you compare your L500 with other models (different number of PSxxxx) the difference is available from hardware such as CPU, GPU, ability to drive HARD, perhaps, ports, but in general, the LCD is always the same.

• HP - Compaq ProBook 4520 s: HP - Compaq ProBook 4520 s compatible RAM upgrades

  Hi guys! I bought the HP - Compaq ProBook 4520 s and I plan to upgrade my memory (4 GB of ram).  Is PC3-12800 unbuffered NON - ECC 1.35v or PC3-10600 1333 - PC3 compatible? Can anyone suggest me what is the most compatible? Thank you!

  Supports up to 8 GB of system RAM PC3-8500, 1066 MHz, DDR3

  I guess you want to upgrade to 8 gigs. The specified memory modules are:

  4 GB (PC3-10600 1333 MHz, DDR3) 599092-001

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1451132539&SR=8-1&keywords=599092-001

  It does not speed up the system to install memory 1600 mhz and your laptop requires no 1.35 volts. The DDR3-1600 (PC3-12800) might work, but you're better off buy the modules specified or as close to them as you can find.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• X 60 LCD replacement instructions

  I ordered a replacement LCD screen for my X 60. Where can I find instructions on the removal of the old coin? I don't know if it was a Dell, I could find documents on their site, but I'm not able to find something like that Lenovo, I'm just not familiar with their site.

  Thank you

  Welcome to the forum!

  you need the Manual maintenance of hardware X 60/X 61.