HP Probook 450 G2: SSD & RAM Upgrade

Similar Questions

• HP probook 450 GB usable RAM

  Hello

  I have a HP probook 450 GO with Windows 7 pro 64-bit installed.

  The laptop has 4 GB of RAM installed, however, when I check this, right-click on 'Computer' then go to 'Properties', it shows 4 GB installed, but only 3.85 GB usable.

  Someone has any ideas why this is not displayed as 4 GB usable?

  Thank you

  If the system has integrated chipset graphics, part of memory is allocated to the integrated graphics chip and the rest is usable RAM.

  Hardware components often use some of the memory (RAM) of your internal system for themselves. For example, while a graphics (GPU) card comes with its own RAM, integrated graphics (also called integrated graphics card) uses part of your RAM as video memory.

  Your computer may also be allocating part of your RAM to other materials, such as your network hardware.

  To determine how much of your RAM is reserved for material and how much is usable by Windows, you can use the window system mentioned above. The total amount of RAM can be used is displayed next to the total amount of memory that Windows can see. In the screenshot below, 0,1 GB of RAM is reserved for materials.

  

• HP Probook 450 G2: adapt WLAN upgrade possible?

  Hello

  My Probook 450 has a slow transferspeed of via Wifi connection. I have the Realtek RTL8723BE 802.11 bgn 1 x 1 Wi - Fi (+ BT4.0 HMC Combo adapter?)

  but I don't know that I have the adapter bluetooth handsets. This because I see only 1 cable antenna.

  The adapter also has only a single connection point (only the hand). Not mean there is no antenna for bluetooth? Or should I open the frame and looking for her?

  Can I put this adapter for extra speed to Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + Intel Dual Band Wireless-AC 7260 BT 4.0 adapter combo?

  Hope someone can clearify this.

  Rgds,

  Theo

  ProductType J4S15EA #ABH

  You are the very welcome.

  I'm very surprised it is working very well and have good reception on both bands with a single antenna.

• End of 2008 Mac SSD & RAM Upgrade

  Hi all

  I have a Macbook 13-inch, aluminum, late 2008. This is the 2 GHz Intel Core 2 Duo, with 2x2gb DDR3 1067 MHz Kington.

  I'm currently under OSX 10.9.5. My Version of boot ROM: MB51.007D.B03.

  I would like to change the current drive with a 512 GB SSD Crucial. Someone of you have encountered problems with SSD Crucial on this particular Mac?

  When I initially swapped to the Kington 2 GB RAM, I read that 4 GB is the max for this model at this time. Recently, I did some more research and found 8 GB might be supported if you a particular firmware. http://blog.MacSales.com/9102-secret-firmware-lets-late-08-MacBooks-use-8gb

  Im looking at buying Crucial 8 GB Kit (2 x 4 GB) DDR3 - 1066 SODIMM memory for Mac. http://www.crucial.com/USA/en/ct2k4g3s1067m

  I've read some people have had problems with 2 x 4 GB and used a config 1x2GB and 1x4Go. However, the post is about 3-4 years.

  Once I update to SSDS and the Rams I intend to update the current firmware. Should I face any problem as soon as I update to El legend with the Rams and the SSD upgrade?

  I appreciate all the comments.

  Mike

  There is no problem to occur as far as I understand your plan except that it is much more fast MacBook Pro you expect!

  You should get 2.5 external HDD Enclosure also inches so that you can make drive bootable with Carbon Copy clone or SuperDuper clone!

• ProBook 450 G2: G2 ProBook 450 change SSD HARD drive

  Hello

  I have a G2 450 Probook and specifications are good, but the HARD drive is quite slow

  Is it possible that I can change it with a SSD

  I have no problem with dissassembling it I just need to know if an ssd will adapt to this topic

  If so, the Samsung 840 evo ssd works?

  Thanks in advance,

  Mathias

  Yes. The Samsung EVO 840 will work.

  See the post-it notes I wrote in book-> updates at the top of the section.

• HP - Compaq ProBook 4520 s: HP - Compaq ProBook 4520 s compatible RAM upgrades

  Hi guys! I bought the HP - Compaq ProBook 4520 s and I plan to upgrade my memory (4 GB of ram).  Is PC3-12800 unbuffered NON - ECC 1.35v or PC3-10600 1333 - PC3 compatible? Can anyone suggest me what is the most compatible? Thank you!

  Supports up to 8 GB of system RAM PC3-8500, 1066 MHz, DDR3

  I guess you want to upgrade to 8 gigs. The specified memory modules are:

  4 GB (PC3-10600 1333 MHz, DDR3) 599092-001

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1451132539&SR=8-1&keywords=599092-001

  It does not speed up the system to install memory 1600 mhz and your laptop requires no 1.35 volts. The DDR3-1600 (PC3-12800) might work, but you're better off buy the modules specified or as close to them as you can find.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 4740 s (B6N52EA): RAM upgrade

  Hello! Сan I put this RAM the laptop

  Kingston SODIMM DDR3L-1600 4096 MB PC3L-12800 (KVR16LS11/4)

  THX

  Hello

  Accourding to the user guide page 2 Yes the (Kingston SODIMM DDR3L-1600 4 096 MB) memory should work.

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5229498&docid=emr_na-c03531708&docLocale=en_US

• HP ProBook 450 G1 - Bluetooth problem

  I have HP ProBook 450 G1.  I just upgraded my windows 8 Windows 8.1.

  After improvement, the bluetooth software does not work.

  Please tell me how to solve this problem of Bluetooth?

  Product no: F4W79PA #UUF

  Hello:

  See if this driver works for you.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_127984_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If this is not the case, unfortunately, I wouldn't have any other suggestions to offer.

• PROBOOK 450 G2, S/N CND52565J: Want to upgrade ram

  I want to increase the ram of probook 450 g2 8 GB to 16 gb.is is possible? Have any risk if I've upgraded from ram?

  Hello.

  In the manual of your equipment, as it is said that you can extend up to 16 GB, you do not have any risk as in the manual of the equipment, it details there.

  Supports the following configurations:

  16384 MB (8192 × 2, dual channel)

  12288 MB (8192 + 4096; dual channel)

  8192 MB (8192 × 1).

  8192 MB (4096 x 2; dual channel)

  6144 MB (4096 + 2048; dual channel)

  4096 MB (4096 × 1).

  2048 MB (2 048 × 1).

  Service Manual:

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943826 & docid = emr_na-c04763183 & docLocale = en_US

  A welcome message.

• ProBook 450 G2 K9L18EA: G2 450 ProBook upgrade of RAM (K9L18EA)

  Dear Sirs,

  I recently bought ProBook 450 G2 (model K9L18EA) and now I want to improve the standard 4 GB to 12 GB (using the extra RAM 8 GB chip).

  Would you be kind enough to answer if the memory next module will be compatible with my laptop:

  DDR3 PC3-12800 8 GB unbuffered NON ECC 1.35v 1024Meg x 64 CT102464BF160B

  Hello

  Run

  http://www.crucial.com/USA/en/systemscanner

  http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=ProBook&Model=89706&Description=Kingston_System_Specific_Memory_HyperX_Memory_for_HEW_ProBook_HP/Compaq_-_ProBook_450_G2

  Concerning

• RAM upgrade - ProBook 450 GB

  I have laptop - HP ProBook 450 GB.

  Can I insert memory RAM 2 x A-Data-8GB-2RX8-PC3L-12800S-11-DDR3L-1600-CL11?

  Hello

  It should work check page 45 in the link below and your laptop supports up to 16 GB you get the use of Max of it if you have a 64 bit OS

  Service manuals

  

• HP ProBook 450 G2 P5S40ES #ABU: maximum Ram supported by Probook G2 450

  Please could you tell me the maximum ram supported by the HP Probook 450 G2 P5S40ES #ABU? I think buy it on Amazon, but it has only 4 GB. I would like to upgrade at a later date, but has no way to know which is the maximum. I tried to find out what was the motherboard, so I could figure it out myself, but it is not listed in the manual, section of drivers, review sites that I could find. Manual do no suggest details on upgrades as far as I could tell.

  @Rildrim

  Supports the following configurations

  16384 MB (8192 × 2, dual channel)

  12288 MB (8192 + 4096; dual channel)

  8192 MB (8192 × 1).

  8192 MB (4096 x 2; dual channel)

  6144 MB (4096 + 2048; dual channel)

  4096 MB (4096 × 1).

  2048 MB (2 048 × 1).

  Your Service Guide here.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=6943826&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Your videos to remove/replace here.

  http://h20464.www2.HP.com/results.htm?SID=6943826&MEID=BFEAE0A5-A6BD-4541-BA9F-32A9F9567EFA

  REO

• G3 ProBook 450 (p5s63ea): Probook is g3 450 compatible bx100 Crucial SSD 120 GB

  I bought g3 ProBook 450 (p5s63ea) and changed 500 GB HDD to 120 GB SSD Crucial bx100.

  And I have following problems:

  (1) bios does not see SDS each time. I tried to reboot several times SDS, place the drive back hard, and sometimes he'll see. If she begins to see I can install Windows 10 on it and if I reboot or shutdown 10 correctly portable windows will see SDS all the time and there will be no problem.

  (2) problem arises when I do sleep for laptop and wake him up. When he wakes he appears with the picture, but hangs and does not allow to enter the password. If I remove the obligation to enter the password after waking up upwards Win 10 wake up in windows, he hangs up after 2 seconds. I tried many solutions, I found here about problem of awakening, but nothing helped.  If he hung up only remains to press on the button / stop for 3 seconds and stop feeding, but after that arrises problem 1 - notebook see SSD with operating system.

  If I install the same copy of windows on the original HARD disk 10, he wakes up after sleep perfectly. Crucial Bx100 has lates firmware mu02.

  Therefore crucial bx100 120 GB SSD incompatible with g3 450 probook?

  Solved this problem by buying a new SSD on slot m2. It seems to work and wake up stable.

  Know this subject publish when you plan to upgrade HDD 2.5 "SDS. At least not all SDS is compatible with mobile HP.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• ProBook 450 upgrade of windows 7 to windows 8

  I just bought a Probook G1 450 with Windows 7 Pro installed.

  What is the best way to upgrade to Windows 8 Pro the supplied DVD?  I work from home if higher security options is not necessary.  The HP support site gives two options - inplace upgrade and clean installation as below.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/upgradeMigrateDisplay/?sp4ts.Oid...

  Also where can I find the Windows product key?

  Thank you.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Sales page of HP for HP p/n F2P35UT - HP ProBook 450 G1 States;

  "Windows 7 Professional 64 (available through Windows 8 Pro downgrade rights)
  Note: This system is preinstalled with Windows 7 Professional software and also comes with a license and support for Windows 8 Pro software. You can only use a version of the Windows software at a time. Switching between versions you need to uninstall a version and install the other version. You must back up all the data (files, photos, etc.) before you uninstall and install operating systems to avoid the loss of your data. »

  This disk is not a standard Windows installation disc and "clean" and "inplace upgrade" options do not apply. Regarding the Windows product key, it must be integrated in the HP Wndows Pro 8 installation media and Windows must be previously activated.

  If you want to reinstall Windows 7 Pro at any time in the future, you create your personal set of HP Recovery / restore before installation discs for Windows 8 Pro included disks.

  HP ProBook 450 G1 of laptop is a class computer business and as such, may be the best answer to your question in the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation