ProBook 6460 b: HP Probook 6460 b won't DVD boot

Similar Questions

• MacBook won't dvd boot

  Hello fellow apple fans I got a macbook pro 2006 I reinstalled Tiger and want to upgrate to lion I bougt garage an os x snow loepard dvd and it does not form when the pc is booted it comes up with a folder with dvd content, then I click on reboot (when iam in the wizzard upgrade) and it restarts and then spits out the dvd (only the CD of the Tiger need to start)

  Hi Raymond:

  Have you tried to boot normally, then insert the CD and see if there's an installer on the CD.

  Also, here is a link I found which may be useful. http://www.Macworld.com/article/1142454/OS-x/install-Snow-Leopard.html

  Kim

• HP probook 4530 s CD-ROM/DVD-ROM cannot read the disc.

  Hello, pls can someone help me? my hp ProBook 4530 s CD-ROM/DVD-ROM cannot read DVD when I insert spin them on Windows 7 32bits. Thank you

  Hello:

  See if performing each resolution steps 2, 3, 4 & 5 fix the problem.  One usually does.

  http://support.Microsoft.com/kb/314060

• HP ProBook 4530 s won't start.

  I have a HP ProBook s 4530 that won't start.

  • Plugged in, it won't start when I press the Start button.
  • When I plug the power cord of the light where I plug the cord turns on for 1 second then turns off.
  • When I press the internet button next to the wifi button then the power button light comes then for 10 seconds, one of them goes out.
  • And it does this whenever I press the internet button.
  • It is the second time that this has happened. The first time I tried what I saw in the forums where I removed the battery and held the power button for 30 seconds with the power cord removed, then restarted the machine with the only attached power cord and it worked.
  • This time, after some good 4 months of my laptop works well it happened again.
  • This time, although the machine does not start just despite displaying the same symptoms as before.

  Any help or advice from people can give to this problem is greatly appreciated.

  Thank you

  Maevarangi

  marli1978

  Please count the blink code

  http://support.HP.com/us-en/document/c01443366

• HP Probook 430 G1 won't work without charger

  Hello!

  I have a HP Probook 430 G1, which is about 1.5 years old. All of a sudden it won't work without the charger plugged. If I leave the charger, it immediately stops and will not start until I plug it again.

  A few days ago my computer would go hours without charging me.

  My computer detects the battery and it's 97% charged.

  Batterycheck HP said that my battery capasity of 42% of what it had when it was new.

  What is the problem? Do I have to buy a new battery?

  42% of what it was to have should be enough to make him stop not immediately after I unplug the charger.

  It seems that the battery died then. IF you have a bad cell, but others are fully charged, reported its possible to get a full charge. You can't really test it properly with the adapter plugged.

  IF Windows is record that the battery in the tool bar, can you draw everything plugged and it shows that the battery is out? IF Yes, then you know that the mobo circuitry does its job.

  If I understand correctly, is not a good idea to fully charge a battery at 100%, nor let him down until the laptop shut. You can set this in your Bios does not load 100%.

  You can do this if you get a new battery.

  Just my 2 cents.

  It will be useful.

• HP probook 4520 CDDVDW not reading DVDs but it is reading the cd

  My CDDVDW not reading DVDs but it is reading the cd, when I check in the management of the computer-> properties of the drivers-> details-> driver description shows me the cd rom value why?

  Hi, Munirazammuhammad,

  Try the solution given here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/CDDVD-drive-not-reading-any-disks/ed34498f-9885-4482-BF83-e56579884834

• HP ProBook s 4540 - system does not boot after recovery

  My friend gave me the laptop, because the system has not been detected. I decided to recovery operating system.
  I had to face following error messages:

  -I did not receive "Boot Device not Found" error

  I started the HARD drive with result success test

  -next step was to recovery OS
  He finished with the new error message
  "The boot image selected is not authenticated to. "Press to continue.
  According to this topic:
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/selected-boot-image-did-not-aut...
  I did following:
  -secureboot changed to disabled
  problem persisted

  -legacy changed to enabled
  Since then, I'm not able to do anything. When I leave the start system, it ends with the HP logo, and nothing happens.
  When I press ESC after a reboot, menu appears, but I am not able to enter the BIOS. If freezes all the time in the menu with the text highlihted.

  I tried to remove the battery, unplug the power, press the powerbutton for 30 seconds, nothing has changed.

  Next step should probably be to temporarily remove the RTC battery, but I don't know if I'm allowed to open it without losing the warranty.

  The laptop is about 3 months old.

  Hello:

  Because the laptop is under warranty, I suggest your friend contact HP technical support and ask them to solve the problem.

  When you get a not found boot device error it's hard drive (if the test says it is spent or not) or the drive controller on the motherboard.

  I wouldn't touch with a ten foot pole.

  HP support will probably have your friend go through certain stages that you did before they tell him what to do next as return them for warranty repairs, etc.

• HP 11 Magenta Jet: Magenta HP FLOW 11 won't start / boot / no display

  Recently, my daughter plugged speakers to the USB port of load and the computer became black. Now I tried the power button / stop. then held for 8-10 seconds to see if it would be hard reset, when the Start button / stop lights I pressed and then repeatedly ESC key not... no chance and the computer does not. No removable battery so that can't get out. Will try power button / stop flashes long perhaps 3 seconds each time but no system startup. Tried this wired and wireless. When the cable is connected to the red light next to the power supply is turned on. Ideas to help save my daughters computer? Nothing on this site covering the stream itself.

  Contact service guaranteed HP and demand.

• Satellite P200-1EE won't CD/DVD boot

  Hi all

  I try to boot from a boot Acronis True Image disk so I can install a previous backup of True Image saved. I press F12 during startup, but there is no listed CD/DVD drive.

  I tried to move the drive up in the selection of start in F2, but it doesn't always start the drive.

  What can be wrong here?

  Thanks for any help.

  Them

  Hello, Leslie

  This is the forum user and you will not receive response from Toshiba directly.

  Back to your problem: Please make sure that you can use the CD/DVD drive with the other bootable CD/DVD media. Have you tested? Try also to set the default BIOS settings and try again.

• EMERGENCY AID! B570 LENOVO won't Lenovo Boot Logo.

  Hello, this is my first post and I hope somebody could lend me a helping hand. I have a laptop of Lenovo B, specifically a B570 series. I got it for a year and a half now and it was working fine until I started to see some issues.

  My first encounter was sartup questions. The machine normally laggs whenever Windows starts up the screen of the user. I checked for it and the problem was variface username and the fingerprint reader. It seems that the two caused a delay to the boot. in any case I had who spend not stop but in hibernation.

  A few months I decided to close my machine and that was my mistake. It starts and then shifted, I normally fixed that by juice holding the power botton and the boot until it works. It worked for a while until that time.

  I realized when I powered it down, he refused to move to the start screen of Lenovo and whenever I select F2/F8 all I get is "please wait...". "and lasts for hours. I tried to replace the hard drive, formatting as outwardly NOTHING.

  I tried troubleshooting such as RAM replacement n all but still no luck. Even removed the RAM and doesn't even get a beep or nothing. Lights are turned on also. I have even restored to CMOS battery pull and nothing seems to work. I also noticed that in this case, the processor fan stops spinning also.

  I really need to solve this problem because of me going to University.

  Help, please! Thank you.

  Hi Netflame,

  You can find support on this linknumbers.

  This is the contact number for Lenovo in Jamaica.

  

  I hope this helps.

• Pavilion g7 won't DVD/CD boot

  I have an almost new Pavilion g7 running Windows 8. I created a DVD of rescue of the Fix - It Utilities 14. I went to the BIOS and BootOption value for CD/DVD internal, recorded and you leave. The computer displays no error message at startup warm or cold, it starts just Windows 8.

  Y at - it another option in the BIOS that interferes with the startup option specified as Secure Boot? Something else? Is there a place to get more information on what each option means no BIOS? The descriptions in the firmware are not sufficient to inform me.

  If the unit has secured start-up, it must be disabled in the BIOS. If it comes with Windows 8, you need secure boot.

  The location of secure boot and the wording thereof may be different from mobile to mobile. It can be marked as secure boot: toggle or it could be an option that can be changed between the secure boot or inheritance.

  Secure boot will start only media having a digital certificate in the system. Currently, the device has a digital certificate for Windows 8 and it will only start Windows 8 If secure startup is enabled.

• 10 update won't even boot, forgoing any errors

  Whenever I have try and install windows 10 nothing happens, no errors, the process of downloading the file and then still nothing

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Laptop HP probook 4540 s: Hp probook 4540 s freeze at startup

  Hello! My hp Probook s 4540 won't start. only the HP logo appears on the screen and that's all, nothing more and system unbootable. I have install hp diagonistic UEFI & then then when I reboot, this problem started. I already update my bios F60. My specs are: Professional Windows 7 64, CPU Intel core i5, 4 GB ram, HDD 1 TB of toshiba, Intel HD Graphics 4000.

  I just reset the cmos & reinstall windows. So this problem is solved. Thank you...

• laptop HP probook 4540 s: hp probook 4540 s freeze on start hp logo

  Hello! My hp Probook s 4540 won't start. only the HP logo appears on the screen and that's all, nothing more and system unbootable. I have install hp diagonistic UEFI & then then when I reboot, this problem started. I cheak my hdd & memory. But it's work clearly. I also put a new hard drive & now I install windows on it. It works normally so far. I already update my bios F60. My specs are: Professional Windows 7 64, CPU Intel core i5, 4 GB ram, HDD 1 TB of toshiba, Intel HD Graphics 4000.

  I am successful to solve this problem. I just reset the cmos & reinstall windows.
  Thank you.

• 4540 proBook s: Win8 only DVD - new installation language

  Hello
  
  I'm not sure if I send this message to the right forum, but here goes...
  
  VERY SHORT VERSION
  
  About six weeks ago, I bought a 4540 of HP Probook which seems to be a well designed system and which came with pre-installed Win8. Are there instructions available on how to install a new version of Win8 (including partitioning and Recovery, System EFI Win and MS Reserved partitions, formatting etc.) using the DVD titled:
  
  HP
  The operating system DVD
  Windows 8 unilingual (EM)
  
  I found how to install Win8 you use others install DVD and partitioning tools which I did not. Thank you.
  
  LONG VERSION
  
  After encountering a problem starting HP Support kindly sent me a single language of Win8 installation DVD. (As they would send me a recovery DVDs, but I asked if they could send media that would allow me to choose my own partitioning etc. during installation.) However I can't find all the instructions concerning the use of it & it appears Win8/UEFI systems is very different from earlier versions of Windows/BIOS I have previously installed.
  
  UEFI does not seem to see the DVD of SL Win8 bootable in the following scenarios:
  (a) native UEFI. Start secure; Quick start
  (b) native UEFI; Start secure; Disabled quick start
  
  UEFI does see the DVD bootable under the following scenario:
  (c) native UEFI; Secure boot disabled; Disabled quick start
  
  With each of the above scenarios, if I hit F9 to start then select "Boot from EFI file" there are anything on the hard drive.
  
  After starting as per c & selection language element, OS & license I get a display screen partitions. Drive C was on the 4 UEFI system partition, but by selecting the score (or other) gives me the warning:
  
  -Windows cannot be installed on the partition of drive 0 4.
  -Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the drive controller is enabled in the computer's BIOS menu.
  
  Maybe this post looks at the UEFI BIOS settings mentioned above (and maybe I chose the wrong settings).
  
  If I go ahead and install it even when the system still will not boot. It is perhaps not surprising because I suspect that the problem is the UEFI boot somewhere - process even if the (in fact all partitions of original 6) EFI system partition always exist and seem to have readable file systems.
  
  I also tried to install Win8 with other UEFI parameters with a lack of similar success. For example. I think that Legacy mode allows to boot from the DVD but does not allow the installation to proceed.
  
  Any help about installing Win8 SL with associated EFI & other partitions would be greatly appreciated. Thank you.

  The solution is to
  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/ProBook-4540s-WIN8-single-language-DVD-fresh-install/m-p/6414166#M178375