HP ProBook s 4540 - system does not boot after recovery

Similar Questions

• System does not boot after CHKDSK

  Reference Dell 745, XP SP3, fully patched. Had not run CHKDSK in 5 years, machine has been in use, thought it might be a good idea. NOT!

  I plan to CHKDSK/F, he ran at the next startup, then I get the splash screen, then black screen, nothing else. If I turn the power off, the next time you start trying to run CHKDSK again, and if I run it or not, same result - start screen, then nothing. What to do next?

  The machine is in reverse now - here's "the rest of the story" - pressing F8 didn't work, couldn't get into safe mode. Recovery Console is not installed on versions of our company. I was able to get a couple of our Support service for Office XP installation diskettes - only one is bootable and even through, that's for XP SP1 and I have XP SP3, it worked.

  Choose the option to repair install didn't solve the problem at all. Once again starting on the CD, I chose the Recovery Console. At this time, I chose FixBoot and FixMBR. And then when I removed the CD and booted up again, pressing F8 gave me access to the boot with Safe Mode and other options menu. Safe mode does not work - I got nowhere (I don't remember exactly what happened at this point, but it did not help). Which does not finally was the last good Configuration. Once I chose that and rebooted, I had a relatively normal cases, slow start and connection, without the detour by CHKDSK. He has been sluggish about 10 minutes longer than normal, but worked normally since.

  I don't see any reference to CHKDSK saves in my shaft system of the observer of events tools - any suggestions on where I could display them?

  My lesson learned here - if the system is not broken, CHDSK is going to break, so on modern systems, only run CHDSK when you experience the symptoms that you can't otherwise explain. That had been the case at home on a Win7 laptop, which had suddenly slow, with a blurry view near the start icon.  I had been worried about the virus and horses of Trojan, but a suggestion in the forum Win7 on Tek-Tips pushed me to run CHKDSK, who did to solve this problem. It's a relief to be back to normal!

• System does not boot after changing graphics card

  I'm under VMware ESXi 4.1 on HP xw8400 workstation. He worked well with HP Nvidia Quadro FX1400 graphics card, but after a while I became tired of all that noise and he changed his Asus Nvidia 7300LE. Now the system stucks on vfat successfully loaded.

  If I re - install the system with this another graphics card, it'll work?

  Strange that a simple graphics as blocked change the boot process.

  Maybe you order card PCI is also change.

  Simple, you can reinstall your host and then re-import the VMFS volumes.

  If you have local storage, make sure not to format the existing VMFS partition.

  André

• System does not boot after changing the appearance settings

  I installed XP Home successfully, but the resolution of the screen to be changed. When I followed the instructions of troubleshooting, I was unable to get to the drivers. I changed the settings on the advanced screen prompt to auto, and now after the Windows XP logo load and it I hear the hard drive running, the next screen is completely white/black. Help!

  Is this the same solution for: in the advanced options of monitor, I selected "do not use this device"?  I tried to update the driver for the monitor and reach for straws when the button 'update driver' has been 'grayed out' (not available).  I have a new HP 2009 flat screen and have just installed XP on a new hard drive.  Monitor worked, although some resolution.  The type of monitor has been defined as "default monitor" and driver is VgaSave.  Thank you!

• System does not come with recovery disk

  Hi all

  I bought the HP CMT 8300 (preload win 8) system but it does not come with recovery cd. What I have to buy eventually or should belong to the system as free?

  Thanks a lot for any advice.

  All the best

  Hello

  No, the machines now come without recovery media, you can create a game by yourself:

  http://support.HP.com/us-en/document/c03481733

  There is also a recovery on your computer partition, please keep intact, as you may need it someday.

  Kind regards.

• Four-core 64-bit VISTA system does not restart after the latest updates

  My system does not at all now after SP2. It won't even load of recovery disks cannot get sytem to work repairing or family name known good config, etc..

  If you need a copy of the DVD, go to this link and download the image.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
  Kind regards

  Today, it was a good day, I didn't have to use my AK.

• Satellite Pro A200 - system does not boot

  Hello

  wondering if someone could help?
  My Satellite Pro A200 with windows XP does not start. It starts with the Toshiba screen.
  Then goes to a screen black with text where it says "PXEE61 media test failure - check cable" (I have no cable) then said out of PXErom; moves to the next screen, which lists the options: safe mode; safe mode with networking; safe mode with prompt local; Last Configeration well-known; Start windows normally.

  Which have been tried and results in loading from page turns on for about 20 seconds, then just to abandon and trying all the whole process again (before flashing a blue screen) Windows.

  Nothing seems to work - tried to take the battery on a... number oftimes and the power cable, but nothing helps.
  It's already happened, but after a few false starts gets going - but this time he just don't come out it. I could not take others where locally, but I would prefer not to because I live in Spain and need the laptop as soon as possible and do not know, I want to leave it in some otherwise are hands to the risk of wipe them the hard drive.

  So, I would be very grateful for any help as soon as possible and I fear tech short hand maybe having to explain.

  Thanks a lot, a lot.

  Hello

  I think the problem is that the operating system is not found on the HARD drive.

  The test failure PXEE61 media - check the cable appears especially if the laptop tries to boot from LAN.

  Why the laptop is trying to boot from the local network?

  Well,.

  -option may be the LAN was chosen first in the boot order in the BIOS
  -Maybe the drive is defective and so the laptop is trying to boot from LAN
  -the MBR (master boot record) is may be defective

  I think you should take the Toshiba Recovery CD and need to format the HARD drive and needs to be reinstalled the operating system.
  This should help.

  If not, then the HARD drive could malfunction and should be replaced!

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• System does not boot, get the white screen after preparation for auto repair

  Hello

  I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart.  When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text).  Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair.  Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen.  I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive.  But I need a drive recovery media that will scan all.  Anyone know other options?  I have a disc of recovery of a Microsoft coming 8 Pro (dell).  Would it be an option, to use it (I got it on a flash drive) and start-up of that?  Thanks for the help.

  Hi John,.

  Thank you for the update.

  Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.

  Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.

  Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.

  Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Installing the graphics card... System does not boot

  Hello

  I received a HP P6-2387ea today (I5, 8 gb, H61 Chipset) with the intention to introduce a new GeForce660 inside that also happened today.

  The PC boots up well with its default material and very well with my addition of a 500 watt PSU... However, when I add in the GeForce 660 does not start, I am rather greeted by 6 beeps to the bios, which is obviously not a good thing.

  My first thought was gpu at fault, but I tested it on another machine and it works fine. I also took a GeForce 460 of this old machine and tried in the new HP one, same result.

  I'm missing something here, or I have a faulty card or something?

  (To avoid responses of stupidity, yes the 500w PSU is a lot and the appropriate pci-e 6pins were attached).

  Any help would be appreciated.

  Bill

  Hello

  First response to your title question is "no, your motherboard is not broken.

  Try this:

  Boot into the bios and go to the Secure --> Secure Boot Configuration topics. Now disable secure boot and turn on legacy mode. Now let's see if the PC will start using the material existing HP before you make any changes. If the PC starts, then try just a video card.

  View your results.  I have a suspicion about what the issue is for the motherboards that are active UEFI.

  --------------------------------------------

  Side note:

  It seems someone is trying to find an answer to this question using different HP computers as a way to find the answer when the PC is delivered W8 and active UEFI.

• System does not boot into Windows when a USB is installed

  It's strange.  I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine.  Has made the choice of 'Upgrade '.  Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post HD) USB device is installed in the machine and I run a reboot or extinguished/turned on, the system starts to boot, runs through the BIOS section, but just before trying to start Windows I get a fast blinking cursor in the upper left of my screen.  If I remove all the devices usb between PC and manually must shut down and restart it restarts in Windows very well.  What is the problem?

  Desktop HP M9350F model; 64-bit; BIOS Rev 5,29 (28/04/09); BIOS Boot Priority: floppy, CD, HD, network (note: there is no other choice shown/available USB?)

  Maybe someone else has had this problem and an easy fix is avaiable.  Thank you!

  CD,

  Well believe it or not, I realized the problem.  Not the BIOS.

  One program, I have installed is SecureDoc WinMagic.  It's encryption software, although my drive has (yet) been encrypted.  In fact I had contacted the Lim before this same thread started to think it might be because of that, but he told me it was probably my BIOS and nothing to do with their SW.

  However, last night I decided to remove their SW before my "repair" operation was scheduled.  How to have this removed SW, it's just our curiosity, I decided to start once more with a USB device installed to see if the hang up has continued.   By my surprise, the start went as usual by means of windows and office.  DAMN!  all this time lost, mine and yours!

  I contacted the company SW this morning and they found a way to modify their SW and get the boot to work (always with the unencrypted disc).

  I wanted you and someone on this thread to know the outcome, so if this happens in the future with another user, this can help to avoid long-term on unnecessary troubleshooting.

  Thank you once again for all the time you have helped me with this issue!

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Windows does not start after recovery

  Hey, satellite 1800 started son to have more and more slow to the point where it took close to an hour to boot in Windows. It got to the stage where it seemed that recovery from the CD was the only road - so we did. Everything had to look successful from the point of view of recovery but the installer of Windows XP displays "Please wait...". "with the normal activity of the disc looking for 20-30 seconds and then hangs - no disk activity, the mouse is not responding. I went through the recovery in "expert" mode and don't see any problems with the recovery process. Issues related to the:
  1 no matter who else seen elsewhere?
  2. what else can I do diagnosis-wise?
  3 which, basically, the recovery process not / (fact he re - format partitions, could it have left a virus?)
  4. I'm better h/w or s/w diags?

  Bitshifter

  Hi Bitshifter,

  topic of your question 3:
  The recovery process replaces the whole HARD drive or even a partition with an image created by Toshiba. This image contains an operating system, drivers, and a few basic programs. All other data (including viruses) in this partition will be deleted.

  question 4:
  I don't know the cause of your problem, but I think it's a hardware problem, because after recovery, there may be incorrect or missing software.

  Sorry I can't give you more information.
  Good luck!

• HPE 500y: Wifi does not work after recovery

  I have a Hpe 500y with a card mother n-alvorix, I recently did a clean install and now I have no wifi
  When you try to install the driver of hp a ralink I get an error saying is not minimum required 9996
  I tried to look for the adapter mini by adding a fracture, but it does not find
  I also found what he sow there a 802.11 mini bag PCI
  Research through services, it seems to be there
  What is happening is that something is blocked
  The map shows it as a hp 3090
  He worked before clean install

  I imagined of is it tried to download the driver or do both, but u has failed to get the jury to access if as I sayed fo 30 dollars I can peak ausb wireless as a matter in fact I have a lynsnc but it of for mites Xperia windows try comparability n mode in any case thanks for the reply I'd send u a helping hand to the top , but I can't send you a so thanks cost just outside the way the need n this case