Pavilion g7 won't DVD/CD boot

Similar Questions

• Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Please help me I have ACTIVE BAD PARTITION and now hp Pavilion dv2000 won't turn on

  Start with a utility cd and change the partition Active. If you scroll down on the page and get > CD Bootable and > ImgBurn to burn the iso image to cd, a guide on the use of ImgBurn to write an ISO on a disc is > here. Once created, boot from it.

• Can I dwnld copy of OS WinXPpro, burn a DVD to boot on the floppy drive to recover the deadly accident of en using F12 select Boot Drive? I have the s/n Auth/softwr.

  Original title: ask again once-> can I dwnld copy of OS WinXPpro, burn a DVD to boot on the floppy drive to recover the deadly accident of en using F12 select Boot Drive? I have the s/n Auth/softwr.

  Help.

  Dell laptop lock-loops to start in the black & white screen asking me to
  Then select Startup disk
  "dailies" to the next screen which expires just by itself, then
  place a line of BACK code screen, then freezes.
  So, at the start, I can see the option to choose F12 drive start from;
  and of course, I would choose FDD DVD player
  IF I HAD A DRIVE W / THE O/S ON THIS SUBJECT.
  But as John Belushi used to say: "NO-o-o-o-o-o-o!"
  So, can I download a copy of an OEM version of Windows XP - pro (same as mine) and then burn, which load in the floppy drive on the Dell, State zipped/compressed and have the
  BIOS see the disk in the floppy drive and perform a reload of the OS?
  I need to download on my other one cmptr, burn it being dwnld (cause that is a Mac Intel DuoCore).
  And if I can get this Dell pro M/S Windows XP right back, otherwise, we are sick of the trash, THAT M/S imposes on the market as a "finished".
  Help, pls.

  Hello

  You can access the link: how to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.microsoft.com/kb/326246

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• Pavilion xL844 screen go black while booting

  Pavilion xL844 screen go black while booting, I put a new drive hard in and installed Xp everything is OK but when I reboot in the middle of the home screen go black, and if I try to reinstall windows it works until I reboot then it go black again.

  I tried a new video card, and it worked thank you

  I don't know how to close this thread

• Pavilion 500-018: BD/DVD player not working not not on a pavilion of 500-018

  Hello

  I have a 500-018 Pavilion on the Bluray/DVD driver no longer works. The drive is detected in the BIOS but Windows 8.1, I can't access the drive at all. The drive is listed as a BD - ROM drive.  I tried uninstalling and reinstalling, but it doesn't help.

  I tried the diagnostic tool to sequentially play a DVD the disk and it says to insert a disc, even if there is already a disc inserted.

  Any suggestion?

  Thank you

  Gilbert

  Probably more likely.

  The probability is the laser that scans disks disappeared, so unfortunately for you I think that you might have to buy a new optical drive.

  --------

  Please give a boost to the top [ BRAVO ] to say thank you

  or if this solves your problem, please click "I accept as a Solution."

  I don't have any affiliation with HP, I'm just a customer like you.

• MacBook won't dvd boot

  Hello fellow apple fans I got a macbook pro 2006 I reinstalled Tiger and want to upgrate to lion I bougt garage an os x snow loepard dvd and it does not form when the pc is booted it comes up with a folder with dvd content, then I click on reboot (when iam in the wizzard upgrade) and it restarts and then spits out the dvd (only the CD of the Tiger need to start)

  Hi Raymond:

  Have you tried to boot normally, then insert the CD and see if there's an installer on the CD.

  Also, here is a link I found which may be useful. http://www.Macworld.com/article/1142454/OS-x/install-Snow-Leopard.html

  Kim

• ProBook 6460 b: HP Probook 6460 b won't DVD boot

  I bought a refurbished HP Probook 6460 b supplied with Windows 7-64 bit. By mistake I got a virus that made me format my HARD drive and as I didn't have a Win 7-64 bit, I installed Win 7-32 bit. Then I move on to Win 10-32 bit. Now, I got 10 64-bit Windows and I have to install it as a new installation. My problem is that when I try to boot from the DVD, laptop computer jumps to start Windows normally. I tried ESC, F9, but I don't know what option is to boot from DVD I do not see this option. Help me please. Thank you

  Hello

  Through the Option 2 in the tenforums of link tutorial posted in my first post to create Bootable USB Flash Drive to install Windows 10 using BIOS Legacy (without UEFI).

  Concerning

  Visruth

• G7 Pavilion: Pavilion g7 won't boot afyer routinr 8.1 update

  I can't start my conputer, I was prompted to restart for the installation of the update and now stuck on a white background screen of purplr.  I need to keep my posting attached external display, my screen is broken on my computer laptop andhas Bern since a week after the purchase... How can I solve this problem?

  I found a work around.  I took out the broken screen.  without the attachment of the screen, the system automatically seeks another device on which are displayed, so it displays on my tv.  YAY.  Remove broken screen also allowed my computer to boot.  I replaced since the computer screen and now will have zero trouble.  I used to do a rescue usb drive.  Then. If anyone has questions to not be able to start and have a disiplay broken on the laptop disconnect the screen broke when you have attached an external monitor. Hope this helps you

• HP Pavilion 7850 won't windows xp cd boot

  I have an old HP, in the garage, I have not used in a while.  I turned it on a couple of days and I got the blue screen "unmountable boot volume" message  I looked online and found a possible solution.  This involved starting from my Windows XP installation cd.  I made several attempts to boot from the cd.  No go.  I picked up a hard drive used on ebay and installed.  I tried to boot from the cd again.  no go.

  Thanks again for all the responses.  I thought about it.  In the installer, I wasn't getting the CD-ROM drive to the top of the boot list.  I moved it to the top and the computer has booted from the cd.  Thanks again!

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

  My rarely used DVD player no longer works. Here are the things I have seen/made:
  -J' updated to Windows 10. It may or may not have stopped working before the update.
  -I update Windows automatically, and everything seems to be in order there.
  -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
  -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
  Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):
  
  SOFTWARE PROBLEM?
  I followed these as much as possible:
  http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
  http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
  http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...
  
  -I got disconnected/reconnected the drive.
  -J' tried various DVD I knew to do.
  -I don't have to update the BIOS, given warnings.
  - Nor did I mess with registry filters.
  -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
  So I can't say whether or not it is a software problem.
  
  HARDWARE PROBLEM?
  -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.
  
  Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

  While you are not alone in this problem, here's a thread that deals with her.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

  See if that helps

• HP Pavilion dv7 won't enter the BIOS. Anyone (Esc, F9, F10, F1, F2 etc.) on the key

  Hello

  I have HP pavilion dv7, which leaves me not in the BIOS to change the boot order.

  I have windows 8 32-bit installed and keep start normally any key (Esc, F9, F10, F1, F2 etc) at the beginning, is pressed or hold... it will not stop the boot and won't let me in the BIOS. All it does if the keys are pressed, it emits beeps but boot then anyway.

  I want to boot from USB and install WIndows 8.1 64bits.

  Help, please.

  Thank you

  This could help you as it solved my problem yesterday. I disabled quick start (or quick start) in the settings menu of your laptop. I have turned on one day, not knowing that it prevents you from all the boot options. I'm at work and do not have access to a large part of the internet, but google "disable fast boot windows 8 ' or 'disable' quickboot. There are quite a few Web pages that walk through it.

  I am now able to access BIOS.