Process several files in gray

Similar Questions

• Problem processing several files in Photoshop Elements

  I have always used the process multiple files option in the menu file without problem. I just finished editing some photos that I've done before and wanted to turn it into a smaller JPEG file and add my watermark. I put all the settings under multiple program files and click OK. The first image came and appeared in the process, but then a dialog box "save under" came. The box has been asked to save the file as a photoshop file and not a JPEG file. I can't find out why it does this. I restarted the program and my computer and I tried to run the same process on the other files with the same result.

  Which version of elements?

  Was it a raw format file?

  If so, your mode menu bit in the middle of the lower bar of the ACR dialog box is set to 16 bit? Try the 8-bit configuration and save a raw 8-bit file before trying the process several files again to see if that makes a difference.

• Unable to process several files on one of the three catalogs

  After having adjusted to get my catalogs in order, what I did, I encountered another problem. I have three catalogues one for people, one for things and I give the floor to work where I try which is new to me, so I do not ruin my main catalogues.

  I straightened the files in my catalog of things. I have a category which contains images of the pages of the book of autographs from the end of the 1800s. These analyses were conducted in JPEG some time ago. I tried to use several treatment to change these 55 images in psd in the original file to be consistent with the rest of the catalogue. Whenever the process fails.

  In order to see what could be the problem I have copied the file category in two of my other catalogs and were able to process the file category itself as a psd. I also created another small file in the catalog of things and tried to convert and had the same result. The box of warning information that appears when the copy in the same file indicates that the original files will be overwritten. Psd files do not overwrite the jpg files. They are added to the original file. Maybe it's the way it is supposed to be. This isn't a real problem.

  The real question is why I can't deal with multiple files in the original catalogue. I looked at the file of errors and, although I don't know a lot about most of it, I found the following in the first part of the file.

  Exception crash = "EXCEPTION_ACCESS_VIOLATION.

  I run XP SP3 and PSE 8. I am a user who has administrator rights. I don't find any mention of an authorization filter in the PSE 8 program.

  I'm stuck until I solve this problem and I need help is done. Any suggestion or information will be greatly appreciated.

  Post edited by: Minocq

  One thing to try: instead of using 'treat multiple files', you can use the 'export' function in the Organizer to export JPEG images in this category to the psd format into a new folder?

• Unable to get process several files to work

  Recently installed Photoshop elements 12.0, but can't and the processing of multiple work files option.  It is grayed out in the menu files.  What Miss me?  Thank you!

  You must be in "Expert" mode (menu bar above). Yes, you can

• Process several files - rename not RAW to JPG

  Im trying to deal with some RAW files and convert them to JPG format.

  The raw process dialog box is set up correctly, but it seems after the first image has been treated, I am invited to a location to save the file, and her wanting to be registered as a .psd file, in the same place of the. RAW files... Despite the fact that I have a distinct destination location specified, and despite the fact that I have the settings to convert > Max Quality JPG.

  Any ideas why this might happen? I'm new to elements if im not sure if I'm doing something wrong. I modified a RAW file and define my changes as the default Raw camera and I just with to apply these settings to all my RAW files and convert to jpg.

  In the raw converter, make sure that the drop down menu to the bit depth is set to 8 bits rather than 16.

• Enable process several files button

  I use ease 'treat multiple files' in Photoshop elements 3 years. I just bought the version 13 and tried to use the same installation, but the button is disabled. The help manual does not help because it assumes that the button has been pressed. How can I get the activated button.

  Click on the word "Expert" at the top of the PSE window.

• Process multiple JPEG files in gray

  Process several files in Photoshop Elements for Mac OS 10.9.2 10 worked on several JPEG files and then stopped working. Any folder containing JPEG files is JPEGs in gray. I get the error message "the source folder you selected is empty." However, I can work on the jpeg files in this folder if I do one at a time. I tried to exit the program, and then going back in and again, I get the same error message.

  Sometimes this means that folder names contain illegal characters

  Could you give an example of one of the folder names?

• Photoshop Elements 11 - problem when processing multiple files - change the size of the image

  When you change the size of several images with file - process several files (or batch processing, however it is called on the menu in English)

  There seems to be a bug in Version 11.

  Regardless of my entries, that the file size is reduced to under 10% of the original value, such as 4 MB to 350 KB.

  Even if I don't score no parameter for a change of size and also, do not change the format, the file size is decreased.

  The entries in the properties / details of the converted jpg correspond to the settings in the menu, but the actual size is very small.

  Seems that PES 11 has low values in the default settings in the background and does not take into account all entries.

  In the old version 9, the same function worked without problem.

  I installed the updated version available today, 2013-01-05.

  Can you please sign this question on our return in case of problem: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• Several files of more than 500,000 KB in the c:\windows\temp folder

  More than 500,000 Ko I have several files in the c:\windows\temp folder. They are all named as TOP * .tmp and are all together like 7 GB.

  Issues related to the:
  1. What is UPSTAIRS * .tmp files?
  2. may I remove them?
  3. If Yes, do, I lost?

  OS: Windows Vista editions Home Premium on Sony Vaio VGN-NR11Z

  More information about the files:
  ------------------------------------------------------------------------------------------
  System - folders for temporary files 7.847.221 826 KB
  ------------------------------------------------------------------------------------------
  C:\Windows\TEMP\TOPF54E.tmp 532,249 KB
  C:\Windows\TEMP\TOPF310.tmp 532,249 KB
  C:\Windows\TEMP\TOPE604.tmp 532,249 KB
  C:\Windows\TEMP\TOPCD63.tmp 532,249 KB
  C:\Windows\TEMP\TOPC151.tmp 532,249 KB
  C:\Windows\TEMP\TOP71FD.tmp 532,249 KB
  C:\Windows\TEMP\TOP7107.tmp 532,249 KB
  C:\Windows\TEMP\TOP6D2F.tmp 532,249 KB
  C:\Windows\TEMP\TOPB901.tmp 329,440 KB
  C:\Windows\TEMP\TOPC7B3.tmp 329,344 KB
  C:\Windows\TEMP\TOPC503.tmp 329,344 KB
  C:\Windows\TEMP\TOPB854.tmp 329,344 KB
  C:\Windows\TEMP\TOPAB02.tmp 329,344 KB
  C:\Windows\TEMP\TOP5D30.tmp 329,344 KB
  C:\Windows\TEMP\TOP5996.tmp 329,344 KB
  C:\Windows\TEMP\TOPC7C8.tmp 186,240 KB
  C:\Windows\TEMP\TOPC47D.tmp 186,240 KB
  C:\Windows\TEMP\TOP9AFC.tmp 186,240 KB
  C:\Windows\TEMP\DZSEFDA.tmp 155,840 KB
  C:\Windows\TEMP\TOPCA78.tmp 113,280 KB
  C:\Windows\TEMP\TOP9BFB.tmp 93.312 KB
  C:\Windows\TEMP\TOP99C8.tmp 93.312 KB
  C:\Windows\TEMP\TOP863B.tmp 93.312 KB
  C:\Windows\TEMP\TOP490D.tmp 93.312 KB
  ...

  All ALBUMS * .tmp files have now updated the 25.10.2009 and about the same time.

  Thank you for your response.

  Kind regards
  Andrej

  Hello

  Thank you for the additional information.

  Yesterday, I decided to register on IT * files .tmp on DVD and I removed them from the TEMP directory. I decided to do it because none of the processes they used at the time of my comment. I compared the the event logs for any new warnings or errors, but mistakes are appearing as before removal. The errors are:
  -The parallel port driver service failed to start due to the following error: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
  -Could not load the plug-in module. (GUID = {56F9312C-C989-4E04-8C23-299DEE3A36F5}) (Error code = 0 x 80042019)

  I haven't checked on the first error, but it appears in the system log because I erased the corrupt system log - also before deleting the files.
  The second is well known 'Vaio Entertainment Database Services' error (in the application log) and everyone invites you to remove this service from startup list. So maybe I'll do it.

  My Vaio has now extra 7.5 GB of free space and has no performance or other problems (so far).

  Today, I tried this (sfc/scannnow) system scan and the log is perfectly clean. Nothing has been repaired.
  Also checkdisk returns nothing abnormal so I think the albums * .tmp not fail at any other SW. The other issue is how they were created, but as my log files have been corrupted (another known problem of vista), I will probably never know the answer.

  If new sth will appear on the subject (e.g. new TOP * .tmp files), I'll write again.

  Thank you once again.

  Andrej

• Merge several files in many subfolders in a single folder tree

  I have several sets of records, each with several subfolders, trees each subfolder that contains several files. I would like to merge all this into a single folder tree, maintaining the same subfolder structure and each subfolder containing a single set of files, eliminating all inevitable duplicates of the merger.

  Do this manually with Windows Explorer, it is painful and long. I have to select all the files in any subfolders, and then drag the selection to the subfolder in the main folder tree, choose 'move and replace' and check "do the same for the next x conflicts and repeat this process for each of the many secondary issues."

  Although I did an online search before posting this call for assistance, I have saw that of the utilities that will merge all files into multiple files in a single folder, I saw not a utility that will do what I need.

  I hope that someone will know of a utility that will allow me to win this manually for the next years!

  Thank you in advance.

  useful43

  The solution proved to be easier than I thought.

  Rather that you select all of the files in each folder separately, which was painful and long, I chose each tree at once, and Windows Explorer did the rest, as it did before.

  Concerning

  useful43

• Interrogation of several files in the sorted order

  Hello

  There is a use case where I want to read/survey growing several files in sequence

  
  

  
  

  Thank you

  Hello

  I guess, you use the outbound operation of "Listing". In this case, you will get in an XML document with all the details of the file within the BPEL process. Within the BPEL process, you can use xsl: fate with processing activity to sort each record.

• Processing multiple files makes more pixelated?

  I have pictures for my online store which can be really big zoom without distortion.  So I leave the dpi to 300, and run several tests on my mac all with the exact same start/size of the picture everything.

  1. I'm resizing in PSE 14 without using several files processing.

  2. I'm resizing in PSE 14 using several files processing.

  3. I resize preview and don't use all PSE.

  In these contexts - each time, the size of the file is greater with PSE with preview (547KO vs 114ko) - which is a big problem when I have lots of images per page.  The quality of these tests are all to minimal difference range - it is negligible.  However, the quirks start when I add a watermark to the image by using the function 'treat multiple files' - this is where it goes south on me!  Using the preview resized OR resized ESP - anyone, as soon as they get a watermark (and we are talking about only a line of tiny text at the bottom right), the quality gets worse.

  After tattooing, the size of the file on the PES to PES "multiple files" resize watermark (test 1) version will 547KO to 79 KB - and the photo quality is a noticeable difference as well.  Using the preview resized, then PSE "multiple files" (test 2) for watermark, it passes from 114 kb to 83 KB.  Not much difference in size - but I would not have expected a big difference in both cases honestly since I'm not actually resizing - but only watermarking.  But the quality of 'Trial 2' is still significantly different from the version "nothing other than the Preview" without watermark (hands down better on the version without watermark).

  I'm completely stumped on how to make good quality, very "zoomable", a watermark images that remain small in size, while maintaining quality.  Any help is greatly appreciated!

  Thank you

  Sharon

  Sharon user here use Photoshop.  PSE may have some files multiple treatment photoshop feature may not you should ask your question in the PSE Photoshop Elements forum

• I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly

  I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly.

  I tried to use for the function FolderByPath below, but don't know how to use it and have worked. Please help me in this.

  Function Get-FolderByPath {}

  < #.

  . Records of recovery SYNOPSIS by giving a path

  . DESCRIPTION the function will retrieve a record by its

  path. The path can contain any type of leave (folder or)

  Data Center).

  . Author NOTES: Luc relaxing

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . PARAMETER separator

  The character used to separate the leaves in the

  path. The default value is ' / '.

  . EXAMPLE OF

  PS > Get-FolderByPath-path ' Datacenter/Folder1/Folder2 ".

  . EXAMPLE OF

  PS > Get-FolderByPath-path "Folder1 > Folder2"-separator ' > '

  # >

  (param

  [CmdletBinding()]

  [parameter (Mandatory = $true)]

  [System.String []] ${Path}.

  [tank] ${delimiter} = ' / '.

  )

  {in process

  If (((Get-PowerCLIConfiguration).)) DefaultVIServerMode - eq "Multiple") {}

  $vcs = $defaultVIServers

  }

  else {}

  $vcs = $defaultVIServers [0]

  }

  {foreach ($vc to $vcs)

  {foreach ($strPath in $Path)

  $root = get-file-name of the server data $vc centers

  $strPath.Split ($Separator) | %{

  $root = get-inventory-name $_-location $root - server $vc - NoRecursion

  If ((Get-stocks-localisation $root-NoRecursion |)) Select--ExpandProperty name)-contains "vm") {}

  $root = get-inventory-name "vm" - location $root - server $vc - NoRecursion

  }

  }

  $root | where {$_-is [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl]}|% {}}

  Get-file-name $_. Name - location $root. Parent - Server $vc

  }

  }

  }

  }

  }

  You can try to retrieve the object file by steps as well.

  Something like this for example

  $folder = get-data center-name 'LTX01-G8 | Get-file-name "LTX-servers | Get-file-name "LTX servers 0000 - 0299. Get-file-name Linux

  I guess the first qualification in your path was the data center.

• Activity FTP - mget several files with dynamic names

  Hi all
  
  Hope everything goes well.
  
  I was wondering if there was a way to configure the FTP activity to transfer several files with dynamic names to location of the source on a daily basis.
  
  For example, my source files are set with date values (source_filename_ < MMDDYYYY > _ < hh > .txt):
  source_filename_12252009_00.txt
  source_filename_12252009_06.txt
  source_filename_12252009_12.txt
  source_filename_12252009_18.txt
  
  I would like my process flow to do would be to download just the 4 day files based on a script ftp dynamic as follows:
  
  Open ${Remote.Host}
  ${Remote.User}
  ${Remote.Password}
  CD ${Remote.RootPath}
  invites to the wide
  mget?
  quit smoking
  
  In the script of DOS commands, you would have with a wildcard as mget command:
  mget source_filename_%DATE:~0,2%%DATE:~2,2%%DATE:~4,4%*.txt
  
  How should be done on the implementation of this in OWB? It requires a user-defined substitution varilable any?
  
  FYI, I use version 10 gr 2.
  
  
  See you soon.

  Hello

  If you are able to achieve your goal of a script of DOS commands, then you can call this script for a user defined, OWB process flow activity.
  I hope this helps.

  Thank you
  Fati

• Reading several files / locate the data source during execution

  Hi all
  
  I have a requirement of the company in which I need to read files to different folders. This system is not hosting the ODI agent. There are two folders, the folder A and folder b. Two records may have any number of files. My intention is to read the files in a folder and write the data to a table in a database that resides in another system. This forms a flow for me. For the B folder, I have a similar flow. All files (in the folder A and folder B) have the same structure. The requirement is to read A book during the week and the B folder on the weekend. The system that has the database also runs the ODI agent.
  
  Here are my questions:
  
  1. How can I read several files one by one in a folder? Because the read files must be archived, they need to be written in a different folder, file C (for example). How do you archive part? Please note that this machine does not run ODI agent (network share could be an option, but we try to avoid it.
  
  2. can I have only an interface to read files in folder A and folder B? Everything else remains the same (the processing logic/transformations etc.). Indeed, is there a way to dynamically switch between two files (using a variable, perhaps).
  
  I've not worked with files and so any help is greatly appreciated.
  
  Edited by: Sankash 7 May 2009 08:24

  Hi Sankash,

  Hopefully I can help you achieve this task.

  Please go through this link

  Re: import files in a table

  1. you can update the status of the process of the files in a journal/temp table.
  Based on the State of the (transformed) file in the table, you can check the files that has completed its process correctly.

  machine does not run ODI agent:-J' have it is implemented the same type of scenario, in which I am downlading all the files in a common location and treat it from there.

  2. one of the solutions is that: -.

  create two interface with the same structure, but the source table must point to the folder A and B
  Create a variable (week/check) and based on the value, you can call the interfaces.

  second option: -.

  If you're downlaoding the files in a common location, you can reach the spot through a single interface (down load files from folder A or B according to in week/weelend)

  3. If all the files have the same structure, you need only a data store and it should be a variable data store.

  If something is not not clear please me ping / mail to my id (good that now I don't get enough time to go through the forum discussions)

  Also if you need I can send you a diagram wokflow for this loop (read multiple files one by one in a folder)

  Kind regards
  Pascale of M