Process will not die

Similar Questions

• Mixamo animation process will not accomplish

  I can create a character in the fuse and save it in the cloud and can see the character in the library of Photoshop. However, when I try to add an animation to my character in Mixamo it starts a process and the process will run all night without being completed.

  Responded.

• Processing will not be open. I get two Error Messages. I'll provide more details below. (1 - processor Microsoft Works here: WksWP.exe - bad Image)

  I have Windows 7 Premium, which was already installed on the computer.  I have no problem with the opening of other programs, but the Microsoft Works word processor.  The first error message states: "C:\PROGRA~2\MICROS~1\wkwpqd.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider. "When I click on 'OK' a message appears saying,"Word cannot access one or more files that he must run Word-processing.  The files may have been renamed, deleted, or moved.  Try reinstalling works, and then restart the program. »

  I tried to run the program in compatibility without success mode.  Any help would be appreciated.

  Thank you

  Well, it's a problem. The only supported solution (unless you have a
  PC Backup) is to reset the computer to factory settings which will be
  lose all your files and software that you have installed. Pretty drastic.
   
  You can try this. Find works in the start - menu control panel (click on Classic on the)
  left side) - programs and features. There should be a button to repair on
  the toolbar just above list when Works is selected.
   
  You can watch it on the D drive (or whatever drive is the drive restore - it)
  can be hidden) to see if this file exists as a stand-alone file.
   
  If someone you know as a work you can fly the file from them.
   
   
  --
  ..
  --
  "C. Angel" wrote in message news: 578ce9dc-9971-4ba1-FCEB-e93bcd9f1cf5...
  > This software was already installed on the computer, therefore, I have no cd
  > rom to reinstall.
  >
   
   

• Notifications of the quarter activity will not die!

  Hello

  I was lucky enough to get a watch for Christmas I put in place perfectly on my iphone 5.

  Then, when I was doubly lucky to get an iphone 6 transfer the new phone was not quite as simple but the most annoying is that despite the deactivation of all notifications of activity on the new phone they still keep popping up on my watch!

  I tried to restart the phone and watch, but without effect.  I tried search it online, but the only advice I can find is to disable notifications on the phone that has already occurred.

  Am I missing something?  Any greatefully of advice received + all my apologies in advance if the answer to that is blindly obvious.

  With thanks a lot

  Nicola

  Hi Nicola

  Check that Bluetooth and Wi - Fi are activated on your iPhone:

  -Phone: Settings > Bluetooth - on.

  -Phone: Settings > Wi - Fi - on.

  Check that your iPhone and Apple Watch are connected:

  -When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon.

  -Turn off the airplane Mode if it is enabled.

  Check the settings on your iPhone:

  -On your iPhone, in the application of Eve, go to: Watch My > activity > turn off each one: Stand reminders, reminders of course (set to None), goal achievements, achievements, weekly summary.

  If the problem persists, try to logout and re-matching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• I need to install WMP11, but the process will not let me post. I am running XP Home which came on our Vaio.

  I am trying to load a library application to acquire books for our new Barnes & Noble Nook and this software won't load unless you have WMP11 installed. I tried everything to load this on our laptop Vaio, but the validation process tells us that our version of XP is not legitimate - ridiculous since it is the same version of XP that we had on the machine because we bought it new from Comp USA in 2004.

  What do we do now?

  Try to post the number here...

  http://social.Microsoft.com/forums/en/genuinewindowsxp/threads

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

  my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

  Check here > share your Internet connection with Personal Hotspot - Apple Support

• After SP 2 download my computer will not die after one hour

  before, I downloaded vist pak2 my computer turn off after about an hour of non-use.  Now it does not it stays on all the time.

  Have you checked your sleep/Hibernation settings?

  Changed to a shorter time to see if they work at all?

• Magnifying glass will not die!

  Whenever I turn on the computer, I get this magnifying glass thing where my cursor should be.

  I tried all the procedures suggested on this forum and others to turn it off, but it just keeps turning on.  It is really annoying and makes it very difficult to get anything done.  Help!

  Hello Chibi2,

  ·         What are the steps you tried to disable the magnifying glass on your computer?

  ·         Do you have any software installed on your computer mouse?

  ·         Remember to make changes to the computer before that happened?

  First of all, you should try to disable it from the control panel.

  1. click on start, all programs, accessories, accessibility and accessibility.

  2. click on make the computer easier to see.

  3 uncheck Turn on Magnifier and click Save.

  If this is already disabled in the Control Panel, you must check the mouse settings if it is enabled.

  If you have a Point of Intelli software installed on your computer, you can try to disable the magnifying of the mouse settings.

  You will be able to access this setting in the list of programs. Open this software and look for the option disable the functionality of Zoom (magnify).

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Process do not end, must start to fix

  Ive had this problem for about a week.

  several processes will not be the end, as they will stay there and fill my ram for hours. and just slowed down without changing the amount of memory they use.
  Ive had this problem for the game of Battlefield 3 and Skype.
  It will act like it is closed, but ive looked at it for 3 hours in the Task Manager.
  the only way to fix it is to restart windows which is always a pain
  any tips?

  Hi Andrew Haughie,.

  I saw messages that suggest run the System File Checker to possibly help with this issue:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. At the command prompt, type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Article here.

  Also, have you tried to create a new user account to see if that helps the issue?

  Take a look at the article here with more information.

  Finally, I would also say a scan full antivirus/antimalware to ensure that any matter is not running.  If necessary, you can use the Microsoft Safety Scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I hope this helps!

• vSphere device Replication Manager will not deploy

  Dear people of the future: this is what we have found so far: (http://xkcd.com/979/)

  Install us a vCenter Site Recovery Manager system and have a devil of a time on a vCenter deploy the model to the OVF for the VR device. Error message is "the OVF package uses features that are not supported. "Unsupported section ' {http://www.vmware.com/schema/ovf} vServiceDependencySection' (Extension of vCenter vService dependency)"

  A vCenter is protected and has successfully complete connection, mapping and created the placeholders with vCenter B (off site). When I go to step of the vSphere replication 1 to deploy the aircraft, the model of the FVO shows the correct location of my vCenter server and two servers RS for A and B are configured the same (physical SRM with SQL 2 k 8, vCenter virtual appliance).

  I can force it to use the model of the FVO directly from my SRM server, but then the vSphere replication process will not go past step 2 (reconfigure the VR device).

  In addition, I don't see a "VMware VirtualCenter Management Webservices" service on the vCenter server A or B so I don't think that is the question.

  Thoughts?

  Victor.

  He solved. When I went to run updates on the server vCenter Server, he said that it was waiting for a reboot because of previous updates. A bounced and everyone is happy! Thank you for helping me to talk about it through!

• Apps and PSE 6 program will not open.

  PES 6 program will not open in the start menu or Windows Explorer and editor and organizer applications will not open in Windows Explorer. All files are listed in US and will not empty. This has happened recently, after that I used the program a few years. Should I reinstall the program? If so, the catalog will have to be re-created? There are over 7000 photos in the catalog. I use Windows 7 Home Premium.

  Try to open Orgnaizer and editor-in-Chief of there respective exe with the Welcome screen running.

  Organizer: C:\Program Files (x 86) \Adobe\Elements 6 Organizer\PhotoshopElementsOrganizer.exe

  Publisher: C:\Program Files (x 86) \Adobe\Photoshop elements 6\PhotoshopElementsEditor.exe

  Welcome screen: C:\Program Files (x 86) \Adobe\Photoshop elements 6\Adobe Photoshop Elements 6

  PS: The two paths for the 64 bit OS. For use of the OS 32 bit: C:\Program Files

  If it does not help, try uninstalling and reinstalling PSE again. Uninstall/re-intall process will not suffer your catalog.

  ~ Andromeda

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Qosmio F20-137 will not system restore after the process

  My F20-137 will not restore the system after going through the system restore process. The parameter for the restoration of the system is not in the off position too. Someone there might help me?

  See you soon
  James

  Please check this thread on the Microsoft System Restore tool.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19847&MessageID=72814

  You will find several links to useful pages.

• problem updating SP3 after a reboot at the end of the update process, IE8 will not start

  I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

  Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.