Process do not end, must start to fix

Ive had this problem for about a week.

several processes will not be the end, as they will stay there and fill my ram for hours. and just slowed down without changing the amount of memory they use.
Ive had this problem for the game of Battlefield 3 and Skype.
It will act like it is closed, but ive looked at it for 3 hours in the Task Manager.
the only way to fix it is to restart windows which is always a pain
any tips?

Hi Andrew Haughie,.

I saw messages that suggest run the System File Checker to possibly help with this issue:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. At the command prompt, type the following command and press ENTER:
    sfc/scannow

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

Article here.

Also, have you tried to create a new user account to see if that helps the issue?

Take a look at the article here with more information.

Finally, I would also say a scan full antivirus/antimalware to ensure that any matter is not running.  If necessary, you can use the Microsoft Safety Scanner:

http://www.Microsoft.com/security/scanner/en-us/default.aspx

I hope this helps!

Tags: Windows

Similar Questions

  • The startup process does not end and the system keeps restarting

    From the time my system has been upgraded to El Capitan, I have a problem with the startup of the system. The login screen has horizontal lines. The system does not start properly and begins to restart before completing the startup process. After 10 or 15 attempts, the system starts. Only when the login screen appears without those lines, I know that the system should start. Once it starts, all of a sudden the screen freezes and system crashes too.  This happens usually when I try to open a large file, Powerpoint or Adobe Acrobat. Or the screen moves to the right and the screen freezes and I have no choice other than to restart the system.

    Service center staff has stated that there is a problem of display driver and updated. But it's always the same problem. What could be the problem and how to solve?

    Thank you

    Olivier

    Download and view a report of Etrecheck;

    http://www.etresoft.com/etrecheck

    Ciao.

  • Fault to keep my updates. they download but will not end has started just after my service Pack2 would not install__

    I did not do anything to try and fix it again because I don't want more. I'm not very good with things like that and really do not want bumble but I'm small problems everywhere as I can no longer burn cd

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Startup Repair does not work it starts when it wants... .and when it does not I must start up for hours before his sucsessfull...

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 1033

    More information about the problem:

    BCCode:                                               a

    BCP1: 000000000000002A

    BCP2: 000000000000000C

    BCP3: 0000000000000000

    BCP4: FFFFF80001EB5D17

    OS version: 6_0_6002

    Service Pack: 2_0

    Product:                                               768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\Mini012210-02.dmp

    C:\Users\Deb\AppData\Local\Temp\WER-100698-0.SysData.XML

    C:\Users\Deb\AppData\Local\Temp\WER9F0C.tmp.version.txt

    Hello

    Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
    updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
    suspects. Next message is my generic driver updated methods to use when you get to this section of the
    troubleshooter.

    BCCode: a 0x0000000A

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

    Original title: computer will not open a session.

    c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

    Hi macduf123,

    You did it all change hardware or software on your machine before this problem?

    The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

    You can follow this link and check if you are able to start correctly on the desktop.

    How to solve an error "STOP 0xC000021A.

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I can not burn any DVD or CD - burning interruptions of processes before the end

    Hello world!
    Sorry for my bad English, but I guess you're all updated on the Jesus are not very good in English.
    I have the following problem: I can't burn a cd or dvd. I already tried with different programs such as Sonic, Nero 7.0, I Tunes and every time I have an error that interrupts the burning process before the end.
    So I don't know what to update! I already tried to re install the drivers, but it's didtn can't change anything.
    To help you, I saved a nero error log. I hope it could be useful to someone who could help me!
    Here is the log:
    me

    5 82001080000000000666822849

    Windows XP 5.1
    IA32
    WinAspi: -.
    Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
    Adapter driver: HA 1
    Drive buffer: 2048kB
    Bus type: default (0)-> ATAPI, detected:?
    CD-ROM: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
    Adapter driver: HA 1

    = Scsi-device-map =.
    DiskPeripheral: FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: on
    CdRomPeripheral: MAST * A DVD-RAM UJ - 841S atapi Port 1 ID 0 DMA: on
    CdRomPeripheral: COACH CD/DVD-ROM 2. 1B axvodka Port 2 ID 0 DMA: Off

    = CDRom-Device-map =.
    CARPET * a DVD-RAM UJ - 841 S D: CDRom0
    COACH CD/DVD-ROM F: CDRom1
    =======================

    AutoRun: 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) bytes
    ShowDrvBufStat: 0
    BUFE: 0
    Physical memory: 2045 MB (2095084kB)
    Free physical memory: 1277 MB (1308144 KB)
    Memory used: 37%
    QUERIES PFiles: 0x0
    Use consultation: 1
    Global Bus type: default (0)
    Control supported media: disabled (0)

    21.9.2006
    CD-ROM (ISO)
    21:04:46 #1 text 0 file Isodoc.cpp, line 6410
    ISO document burn settings
    ------------------------------------------
    Determine maximum speed: FALSE
    Simulate: TRUE
    Write: TRUE
    Finalize the CD: FAKE
    Multisession: TRUE
    Multisession type: Start multisession
    Burning mode: TAO
    Mode : 1
    ISO level: 1 (Max. of 11 = 8 + 3 char)
    Character set: ISO 9660
    Joliet: TRUE
    Allow pathdepth more than 8 directories: TRUE
    Allow more than 255 characters in path: TRUE
    Write ISO9660; 1 file extensions: TRUE

    21:04:47 #2 text 0 file Burncd.cpp, line 3007
    CARPET * A DVD-RAM UJ - 841S
    SmoothLink activated

    21:04:47 #3 text 0 file ThreadedTransfer.cpp, line 525
    ReadBuffer-Pipe got 81920KB of memory

    21:04:47 #4 text 0 file Reader.cpp, line 124
    Player running

    21:04:47 #5 text 0 file Writer.cpp, line 113
    Writer D: MAST * A DVD-RAM UJ - 841S race

    21:04:47 #6 ISO9660GEN-11 file Geniso.cpp, line 3304
    First address writeable = 0 (0x00000000)

    21:04:47 #7 text 0 file Burncd.cpp, line 3301
    Turn on Track-At-Once, using CD-R/RW media

    21:04:48 #8 Text 0 File DlgWaitCD.cpp, line 277
    Last possible write address on media: 359844 (79:59.69)
    Last address to be written: 318786 (70:52.36)

    21:04:48 #9 Text 0 File DlgWaitCD.cpp, line 289
    Write in overburning mode: No. (enabled: CD)

    21:04:48 #10 Text 0 File DlgWaitCD.cpp, line 2568
    Recorder: MAST * a DVD-RAM UJ - 841S

    21:04:48 #11 Text 0 File DlgWaitCD.cpp, line 456
    > Protocol of DlgWaitCD activities:
    =========================================

    21:04:48 #12 text 0 file ThreadedTransferInterface.cpp, line 846
    CIS (after recorder preparation)
    0: TRM_DATA_MODE1)
    2 indices, index0 (150) not provided
    #0 + 318787 (318787) original disc POS = #318787 / 70:50.37
    relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAST * a DVD-RAM UJ - 841S]
    --------------------------------------------------------------

    21:04:48 #13 text 0 file ThreadedTransferInterface.cpp, line 1058
    Prepare recorder [D: MAST * a DVD-RAM UJ - 841S] for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCType: 0x00; Closed disc, session not obsessed
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 653182976, ISRC ""
    Introduction DAO:
    ===========
    __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
    -150 | Lead-in | 0 | 0x41. 0x00
    -150 | 1. 0 | 0x41. 0x00
    0 | 1. 1. 0x41. 0x00
    318787 | Lead-out | 1. 0x41. 0x00

    21:04:48 #14 text file ThreadedTransferInterface.cpp 0, line 1126
    Removed 2 blocks from end of track 1. Length: 318787-> 318785.

    21:04:48 #15 text 0 file SCSIPassThrough.cpp, line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    21:04:48 #16 phase 24 file dlgbrnst.cpp, line 1724
    Caching of files started

    21:04:49 #17 text 0 file Burncd.cpp, line 4129
    Cache writing successful.

    21:04:49 #18 phase 25 file dlgbrnst.cpp, line 1724
    Caching of files completed

    21:04:49 #19 phase 32 file dlgbrnst.cpp, line 1724
    Simulation started at 24 x (3 600 KB/s)

    21:04:49 #20 text 0 file ThreadedTransferInterface.cpp, line 2669
    Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

    21:04:49 #21 text 0 file MMC.cpp, line 21541
    Set BUFE: SmoothLink-> ON

    21:10:08 #22 text 0 file ThreadedTransfer.cpp, line 228
    all writers idle, stopping conversion

    21:10:10 #23 phase 33 file dlgbrnst.cpp, line 1724
    Simulation completed at 24 x (3 600 KB/s)

    21:10:11 #24 phase 36 file dlgbrnst.cpp, line 1724
    Burn process started at 24 x (3 600 KB/s)

    21:10:11 #25 text 0 file ThreadedTransferInterface.cpp, line 2669
    Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

    21:10:11 #26 text 0 file MMC.cpp, line 21541
    Set BUFE: SmoothLink-> ON

    21:12:16 #27 SPTI-1040 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Printing Code: 0x10
    Meaning of Qual: 0x00
    The CDB data: 0x2A 00 00 01 76 00 00 20 00 00 00 C0
    Sense area: 0xF1 00 03 00 01 74 5 0 a 00 13 00 00 10
    Buffer x 03390000: Len x 10000
    0 X 72 F1 E5 87 D3 3D 4A 96 F9 B0 73 83 14 72 A1 D3
    0XF3 49 6 93 44 25 04 6 E5 THIS 44 5F 3RD 79 47 C6
    DD EE 0XDD 3A FD 4 71 D CB F3 4B 18 BD 7 D DF 35 32

    21:12:16 #28 COR-1040 file Writer.cpp, line 302
    Illegal block order size
    D: MAST * A DVD-RAM UJ - 841S

    21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:12:17 #30 text 0 file ThreadedTransfer.cpp, line 222
    conversion idle, stopping reader

    21:12:17 #31 CDR - 201 file WriterStatus.cpp, line 200
    Invalid write state
    D: MAST * A DVD-RAM UJ - 841S

    21:12:17 #32 TRANSFER file-18 WriterStatus.cpp, line 200
    Could not perform PlageFin

    21:12:17 #33 text 0 file MMC.cpp, line 16273
    start closing a Session

    21:12:30 #34 SPTI-1040 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Printing Code: 0x10
    Meaning of Qual: 0x00
    CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
    Sense area: 0 x 71 00 03 00 00 00 00 0 to 00 13 00 00 10

    21:12:30 #35 COR-1040 file WriterStatus.cpp, line 249
    Illegal block order size
    D: MAST * A DVD-RAM UJ - 841S

    21:12:30 #36 TRANSFER file-19 WriterStatus.cpp, line 249
    Could not perform fixation

    21:12:30 #37 text 0 file WriterStatus.cpp, line 258
    falling back to disc fixation

    21:12:30 #38 text 0 file MMC.cpp, line 16273
    start closing a Session

    21:12:30 #39 SPTI-1046 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1046)
    Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Printing Code: 0 x 30
    Meaning of Qual: 0x05
    The CDB data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
    Sense area: 0 x 70 00 05 00 00 00 00 00 00 30 05 AA a 0, 00

    21:12:30 WriterStatus.cpp - 1046 file CDR #40, line 249
    Illegal disc
    D: MAST * A DVD-RAM UJ - 841S

    21:12:30 #41 TRANSFER file-19 WriterStatus.cpp, line 249
    Could not perform fixation

    21:12:30 #42 phase 38 file dlgbrnst.cpp, line 1724
    Burn process failed at 24 x (3 600 KB/s)

    Existing drivers:
    File ' Drivers\PXHELP20. SYS: Ver = 2.03.32a, size = 20640 bytes, created 25/04/2005 11:03 (Prassi/Veritas driver for win 2 K)

    Registry keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

    So, thank you!
    Next time!
    Roman

    Hello

    The error log doesn't provide very useful information.
    According to this error log, the simulation was running OK, but the burning process has not been started.
    In such cases, it is very difficult to say why it happens. Maybe the drive is damage and cannot calibrate the lens correctly or using media is not compatible.
    Burning the process depands on the fields and the data that prefer to burn.
    Data, CD, DVDs are encrypted and it s is not possible to burn and copy it.
    In other cases, you can also try to burn media with low speed and not with 24 x.

    But to sentence case you the reader has a malfunction and you need to replace ;(

  • My laptop stops unexpectedly OFF-' Windows must now restart because DCOM Server Process Launcher Service ended unexpectedly.

    What can I do to solve this problem my laptop computer unecpectedly turns off after 4-5 minutes of operation, telling me: "Windows must now restart because DCOM Server Process Launcher Service ended unexpectedly.
    What happens whenever I turn on the computer.
    Advice me please.

    Hello 77Kuty78,

    Allows you to ensure that your system is indeed clean, see below:

    Try to start your system in safe mode:
    1. Restart your computer if it is running.
    2. Press and hold the F8 key for 3 seconds after your computer powers initially on.
    3. Once you see the Advanced Boot Options menu (or beep) you can stop.
    4. Up/down arrow keys to highlight your selection.
    5. Select Mode safe mode with networking and press ENTER.
    6. You should see drivers loading, it may take a few moments.
    7. You should then be at the Welcome screen.
    8. Connect to your computer using an account with administrator privileges.
    9. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!

      Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

    When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

    The server process could not be started because the configured identity is incorrect. Check the user name and password.

    Please give me your entries for this problem.

    Kind regards

    Shankar Kale

    Hi Shankar,

    The question you posted would be better suited in the TechNet Forums. See the link.
    Hope this information helps.

  • Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

    Original title: Windows Update service is not running / working and is not listed in services.msc

    When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

    "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

    * Restared several times-nothing has changed

    Despite what other threads have advised to:

    I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

     

    * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

    * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

    * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

    (Nothing is in the update history)

    Am really worried!

    Thank you!

    Hello


    Have you made changes on the computer before this problem?
    Method 1:
    You can try to start the fix - it and check. Check out the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
     
    Method 2:
     
    You can read the following article.
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

    Method 3:

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.


    Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  • Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

    I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

    1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

    2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

    3. I'm connected (I am administrator), but a lot of things is false:

    -Without Aero. Single base type GUI Windows 2000 gray

    -Lack of network

    -A bubble message appears in the status bar:
    Unable to connect to a windows service
    Windows could not connect to the service user profile Service.
    This problem prevents standard users to log on the system...

    -Almost nothing works. Attempts to start to explore causes this error message:
    SOLUTION EXPLORER. EXE
    The server process could not be started because the configured identity is incorrect. Check the user name and password.

    -Try to start the Panel of results in the following dialog box:
    Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
    Message:
    {26ee0668-a00a-44d7-9371-beb064c98683}
    The server process could not be started because the configured identity is incorrect. Check the user name and password.

    -Try to start most of the results of Windows programs in the variation of the above two messages

    -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

    4. the things I have already tried and that has NOT worked:

    -System Restore to a point a few days ago when everything worked did not help
    -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
    -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

    That did not help.

    In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
    There is no missing or damaged file.

    in any case, thanks for responding.

    I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
    It was the last straw - I decided to empty Windows and had Ubuntu Linux.

  • HsxServer process does not start

    Hello

    While creating a hfm application in administration of Consolidation, I am facing problem as shown in the screenshot. I increased the number of processes, open_cursors to the oracle database. (no luck)

    hfmerr1.JPG

    In the process, HsxServer.exe process does not work.

    all running processes

    DMEListener.exe

    HfmAdmHandler.exe

    HFMWebServiceManagr.exe

    HsxService.exe

    Servcie FinancialManagementWeb

    CASSecurity.exe

    C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\hfm

    HsvEventLog:

    Error * 11 * hyp_admin * 06:47:12 * HfmADOConnection.cpp * 16/09/2014 Line 591 * <? XML version = "1.0"? >

    < C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < / C'estr >

    Error * 11 * hyp_admin * 06:47:12 * CHsxSQLConnectionPool.cpp * 16/09/2014 Line 375 * <? XML version = "1.0"? >

    < C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 375 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Error * 11 * hyp_admin * 06:47:12 * CHsxServerImpl.cpp * 16/09/2014 Line 111 * <? XML version = "1.0"? >

    < C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 375 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 111 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Error * 11 * hyp_admin * 06:47:15 * HfmADOConnection.cpp * 16/09/2014 Line 591 * <? XML version = "1.0"? >

    < C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < / C'estr >

    *

    Error * 11 * hyp_admin * 06:47:15 * CHsxSQLConnectionPool.cpp * 16/09/2014 Line 585 * <? XML version = "1.0"? >

    < C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Error * 11 * hyp_admin * 06:47:15 * CHsxServerImpl.cpp * Line 16/09/2014 8813 * <? XML version = "1.0"? >

    < C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Error * 11 * hyp_admin * 06:47:15 * CHsxServer.cpp * 16/09/2014 Line 93 * <? XML version = "1.0"? >

    < C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServer.cpp < / file > < line > 93 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Error * 11 * hyp_admin * 06:47:16 * CHsxServerImpl.cpp * 16/09/2014 Line 229 * <? XML version = "1.0"? >

    < C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServer.cpp < / file > < line > 93 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 229 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:32 * IOCPServer.cpp * Line 419 * <? XML version = "1.0"? >

    < C'estr > < Ref > {8B984CED-A0CC-4AA6-8D68-8B3B2C1C2373} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287486 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:32 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 419 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv4 < / DStr > < UPS > < Param > listening FM - DME Hyperion service stopped on the port: 9097 < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:33 * IOCPServer.cpp * Line 419 * <? XML version = "1.0"? >

    < C'estr > < Ref > {6E3DFF1E-C1F3-44AE-8F27-577835C16F1C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287486 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:32 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 419 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv6 < / DStr > < UPS > < Param > listening FM - DME Hyperion service stopped on the port: 9097 < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:37 * DMEListener.cpp * Line 797 * <? XML version = "1.0"? >

    < C'estr > < Ref > {541C13AD-B154-44D7-8A14-948F276133DC} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287493 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > DMEListener.cpp < / file > < line > 797 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < has successfully started the Service listening for Param > Hyperion FM - DME. < / Param > / UPS > < / CSEC > < / C'estr >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 246 * <? XML version = "1.0"? >

    < C'estr > < Ref > {A3C1B652-440B-4753-A2E3-A47474782C71} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287499 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 246 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < Param > family IP: Port IPv4 number: 9097 number of connections: 4 < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 369 * <? XML version = "1.0"? >

    < C'estr > < Ref > {CC4CA21B-E339-422E-B534-0C775731E38E} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287485 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 369 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv4 < / DStr > < UPS > < Param > Hyperion FM - DME service listen started on port: 9097. < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 246 * <? XML version = "1.0"? >

    < C'estr > < Ref > {2B55FC01-6BE0-4FB7-9A1F-BD8D69E5D2B4} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287499 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 246 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < Param > family IP: Port IPv6 number: 9097 number of connections: 4 < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 369 * <? XML version = "1.0"? >

    < C'estr > < Ref > {B5D732D0-8852-441F-88FE-FF71F5C98230} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287485 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 369 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv6 < / DStr > < UPS > < Param > Hyperion FM - DME service listen started on port: 9097. < / Param > < / UPS > < / CSEC > < / RTSs >

    *

    HFM. ODL:

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 375] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 375] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 111] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServer.cpp] [line: 93] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServer.cpp] [line: 93] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 229] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.

    [2014 09-16 T 13: 47:32 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FE] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 10760] [tid: 10864] [username:] [file: IOCPServer.cpp] [line: 419] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv4] [paramString: listening FM - DME Hyperion service stopped on the port: 9097;] EHR listener process stopped.

    [2014 09-16 T 13: 47:32 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FE] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 10760] [tid: 17372] [username:] [file: IOCPServer.cpp] [line: 419] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv6] [paramString: listening FM - DME Hyperion service stopped on the port: 9097;] EHR listener process stopped.

    [2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-46305] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: DMEListener.cpp] [line: 797] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: listening to Hyperion FM - DME Service started successfully.;] The DME IP listener financial management service began.

    [2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM - 4630B] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: IOCPServer.cpp] [line: 246] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: family of IP: Port IPv4 number: 9097 number of connections: 4;] Initializing the receiver

    [2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FD] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 4824] [username:] [file: IOCPServer.cpp] [line: 369] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv4] [paramString: listening service FM - DME Hyperion started on port: 9097;] Listening to EMR process began.

    [2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM - 4630B] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: IOCPServer.cpp] [line: 246] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: family of IP: Port IPv6 number: 9097 number of connections: 4;] Initializing the receiver

    [2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FD] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 3412] [username:] [file: IOCPServer.cpp] [line: 369] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv6] [paramString: listening service FM - DME Hyperion started on port: 9097;] Listening to EMR process began.

    Your comments would be appreciated?

    Thank you

    Mady

    We have installed in another server (it is environment of distribution), it works fine.

    I think that it is question of memory or that it treats the issue.

    If I find a solution later, I will update the thread.

    Thanks for all the inputs.

    Thank you

    Mady

  • STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

    I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

    I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
    What about Otto
    Windows vista Home basic

    Hello

    Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    =========

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.


    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
    repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
    discs of the machine system good cheap that you already own windows (you will need to reinstall
    If necessary). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • my firefox closes when I close the window, but the process is not stopped since I got the update to firefox

    Since I upgraded to firefox 2 days ago, there a reboot problem. When I close the firefox window, it closes as it normally does, but whenever I try to restart firefox it shows the notification that firefox still works and I first need to stop the previous process before you can start a new one. Finally after I manually stop the firefox process it restarts again.

    What fixed it for me, but I am running v.15 because of other problems. I have to say I tried a hundred things and nothing works. I made the note never stop, even hours later, if I forgot to go to the Task Manager to end the process. It seems not important to know if I had extensions or modules running or not. I tried this before today. My graphics driver updated a couple of months. In any case, THANK YOU for this, finally something is going right.

  • Help and Support was not able to start

    When I open help and Support Windows, it shows me the following error message:

    "Help and Support was not able to start
    For more information, contact your system
    administrator or visit
    http://windowshelp.Microsoft.com.

    (I'm the system administrator only)
    I am facing this problem for more than a year.
    System details:

    Windows Vista Edition Home Premium SP2 32-bit
    Internet Explorer version 9

    Hi Aditya,

    This could be caused by the virus or corrupted system files on the computer.

    Follow the following troubleshooting methods:

    Method 1:

    Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

    You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

    Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

    Method 2:

    Run System File Check to fix the corrupted system files and then check how it works.

    See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

    Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

    If the problem persists, please answer. We would be happy to help you.

  • My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
    manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore there only to)
    being bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Macbook Pro retina does not illuminate

    Hi all I have a 2015 13 "Macbook Pro, that will not start at all. Last night I came back after a day holiday and powered to the top of my Macbook for the first time in two weeks. The battery level was around 25%, so I plugged the magsafe and did some

  • Satellie Pro L830 - 11G - access to the recovery partition

    HelloI have a Toshiba Satellie Pro L830 - 11G, running Windows 7 I would like to restore it to the original settings.I tried various things, but so far no luck. When I look into the system, I see that the system recovery disk is always classified as

  • Since the last update, the navigation bar does not work

    Firefox opens now in 18 seconds instead of 10 minutes, but the navigation bar is 'dead '. I can type an address, but I can't go there.

  • Write to the table, adding additional rows in the csv file

    Hi all I created a program that measure current over time.  It works well, but when I write to the spreadsheet, there are additional lines between the row of data. I've created a header file, which is passed into the while loop where the data entered

  • How can I change my name to You Tube of AYTe812 in my name of Koelbli

    I chose the name of AYT812 to store all my you tube for the following reasons that she is on top. Y and T for you-Tube 812 for August 2012 But now when I try to share some Youtubes by e-mail that they seem to end up in the Junk section of the receive