Magnifying glass will not die!
Whenever I turn on the computer, I get this magnifying glass thing where my cursor should be.
I tried all the procedures suggested on this forum and others to turn it off, but it just keeps turning on. It is really annoying and makes it very difficult to get anything done. Help!
Hello Chibi2,
· What are the steps you tried to disable the magnifying glass on your computer?
· Do you have any software installed on your computer mouse?
· Remember to make changes to the computer before that happened?
First of all, you should try to disable it from the control panel.
1. click on start, all programs, accessories, accessibility and accessibility.
2. click on make the computer easier to see.
3 uncheck Turn on Magnifier and click Save.
If this is already disabled in the Control Panel, you must check the mouse settings if it is enabled.
If you have a Point of Intelli software installed on your computer, you can try to disable the magnifying of the mouse settings.
You will be able to access this setting in the list of programs. Open this software and look for the option disable the functionality of Zoom (magnify).
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
A week, maybe two, it trafficking, especially firefox, IE, and some games, refuse to die. They die when closed regularly, since the Manager tasks, or even the process of killing programs. I think it's very annoying that I have to restart my computer because frequently used programs are hogging all the memory or an instance program refused to run because there is already a running. I lost the work on this problem. Is this something that happens to other people? Is this a ploy to get everyone to install 7?
I have no spyware, malware, viruses or Trojans that is recognized by all major spyware/malware/Antivirus programs. I'm also fairly warned the process that needs to run and routine maintenance, so I doubt I have something went wrong along the way, I know this mainly because I didn't mess with anything as config and registry. There is no program or registry changes any where near the time it started to arrive.
I would also like to add that the reboot does not work, it just hangs. I have to do a hard reset.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Hallo,
I have associated with an LOV entry field (FieldA) and I configured the LOV to return the value for the field LOV itself plus other 2 values to fill other 2 fields (FieldB and FieldC).
So I have:
FieldA |... | (Magnifier)
FieldB |... |
FieldC |... |
I would like to see the magnifying of the LOV FieldA field but not his inputText.
Is it possible to do this? If so, how?
Could I choose the magnifying glass should appear next to what area?
Thank you
Federico
You can add: contentStyle = "" display: none; "to your component LOV;"
Dario
-
Notifications of the quarter activity will not die!
Hello
I was lucky enough to get a watch for Christmas I put in place perfectly on my iphone 5.
Then, when I was doubly lucky to get an iphone 6 transfer the new phone was not quite as simple but the most annoying is that despite the deactivation of all notifications of activity on the new phone they still keep popping up on my watch!
I tried to restart the phone and watch, but without effect. I tried search it online, but the only advice I can find is to disable notifications on the phone that has already occurred.
Am I missing something? Any greatefully of advice received + all my apologies in advance if the answer to that is blindly obvious.
With thanks a lot
Nicola
Hi Nicola
Check that Bluetooth and Wi - Fi are activated on your iPhone:
-Phone: Settings > Bluetooth - on.
-Phone: Settings > Wi - Fi - on.
Check that your iPhone and Apple Watch are connected:
-When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon.
-Turn off the airplane Mode if it is enabled.
Check the settings on your iPhone:
-On your iPhone, in the application of Eve, go to: Watch My > activity > turn off each one: Stand reminders, reminders of course (set to None), goal achievements, achievements, weekly summary.
If the problem persists, try to logout and re-matching of your watch:
-L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
-Choose to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
-
my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you
Check here > share your Internet connection with Personal Hotspot - Apple Support
-
After SP 2 download my computer will not die after one hour
before, I downloaded vist pak2 my computer turn off after about an hour of non-use. Now it does not it stays on all the time.
Have you checked your sleep/Hibernation settings?
Changed to a shorter time to see if they work at all?
-
magnifying glass is constantly changing zoom size while typing
It drives me crazy. While typing a post, the auto zoom lights (later changed to 110%) I typed that sentence. The hourglass (now it's 125 per cent and now back to 110 per cent). I have reset by default and it will start to change again once I type. Sometimes he (90% now) goes up so much that I can't not (110-90) up to 700%. driving me crazy. It behaves actually better than many other times, when it begins to change the zooms so fast that the computer is unusable. I checked the usability in the control panel and the magnifying glass is not checked. I'm not clicking on shortcuts for zoom in changes.
After trying for months, I finally fixed it right after the typo in the above post. The constant evolution of zoom was caused by the wireless mouse. I opened the Control Panel, mouse and disabled a few zoom feature.
-
How can I stop magnifying glass initialization at startup?
I tried to use the magnifying glass and how to stop it now. The help function doesn't seem to me be much help.
Open the control panel. (Start > Control Panel).
Click on "ease of access".Under "Ease of Access Center", click "optimize Visual Display".Make sure that the box for "Enable on the magnifying glass" is not checked.Click "Save".The microscope should run is no longer automatically at startup.Best wishesBookwormDragon -
How can I get rid of the magnifying glass completely in Vista?
I saw the question and someone found their own response on how to disable the magnifying of Vista but didn't share how to do this. Almost every day I somehow take the magnifying glass and have a lot of trouble to make it's off. I don't want to ever use and want to completely disable the property. How can I do this? Thanks in advance for a simplistic answer as I am not savy computer.
Disable Magnifier
Open the control panel. (Start > Control Panel).
Click on "ease of access".
Under "Ease of Access Center", click "optimize Visual Display".
Make sure that the box for "Enable on the magnifying glass" is not checked.
Click "Save".
Restart the computer (if required).
The microscope should run is no longer automatically at startup.
Best wishes
BookwormDragon
-
With Vista 64 Bit, my magnifying glass doesnot work on many wwbsites WHY?
On a HP Pavilion Special Edition with Vista 64 Bit, my magnifying glass does not work on many wwbsites WHY is - this?
Hello
1. were you able to use the magnifying glass in these Web sites?
2. you remember to make changes to the computer before this problem?
You can try to create a new user account and check if the problem occurs:
Hope this information is useful.
-
My MS 5000 Mouse will not work on glass? Any solution?
I just bought the mouse and found that, after I've cleaned my desk top in glass that lists the mouse is no longer on the screen. Someone has the fix for this?
The glass is transparent? Usually, transparent glass will leave the 'light' mouse / "laser" to get completely through. It is not reflected back to the sensor so that the mouse / pilots cannot see that it has been moved. You may need a mouse pad. As test, place a single sheet of paper and try the mouse. If the mouse seems to work, then you will need the key.
-
My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?
Hi edharaway,
Please visit this link: Get the Code of Activation for Adobe Acrobat 7.0 Pro
Thank you!
Shivam
-
I am trying to turn off the Magnifier and the calculator screen and don't know how
http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html
Above is how to disable the magnifying glass
There is a screeen on keyboard:
http://www.Vistax64.com/tutorials/72733-screen-keyboard.html
See you soon.
Mick Murphy - Microsoft partner
-
I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!
Anna,
It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems. You can check this link to check systems, it is designed to work:
System requirements | CS3 product points.
Guinot
-
magnifer icon has disappeared from the 'bar' at the foot of the computer. System Restore did not return
Here's something you can do, in the Start menu click Help and Support, type magnifying glass in the search box. There will be info and a link to turn it on. I saw glass magnifier in the lower area of the right of bar jobs, can't seem to make it appear on this computer. Used to find a box that says: "Display icon in taskbar". Noticed + U on Windows XP; Sorry, tried to copy / paste the help and Support Center. It's the 'Windows key' + U. The application, magnifying glass, is under the accessories and then under accessibility. Not in the control panel.
Maybe you are looking for
-
Did you notice a delay when the stream to multiple airplay devices?
I've used a wireless Airport Extreme with Apple TV and 1 or even 2 Airport Express to music streaming at 1-3 stereo systems simultaneously always without delay. Now, using only an AEx and ATV there is an echo of the notice. The system does not wait f
-
Could not start sometimes for Satellite A100
Hello My laptop sometimes unable to start and sound power light and cd/dvd rom light goes orange. Then I have to take batteries and start again to restart and sometimes even problem. After the tires at random, it starts perfectly and does not raise a
-
Hey, I'm looking for a way to use a ListView which is the only level of depth (that is to say, has no header). I try the example of stamp collector to work this way, but I'm having a lot of problems by pulling it. Using this code, I get all the stamp
-
History of updates of Windows 7.
How to delete all entries in the history?
-
Last updated blackBerry Z30 will not allow deletion of e-mail
How to delete emails from the server? With the last update, the option delete the server seems to have been deleted and deletion comes only from the hub. Hope I'm just something missing.