Photosmart 2610 yellow color will not print

Similar Questions

• All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

  My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

  I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

  I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

  I printed via the printer settings and also the settings of Photoshop.

  At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

  I only use HP photo papers and real HP363 inks.

  I hope someone can put an end to my frustration.

  Welcome to the HP Forums @-g_s70

  I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

  HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP OfficeJet Pro 8000 Wireless: Can I get some help here? Yellow ink will not print - HP OfficeJet Pro 8000 Wireless

  No matter what I do, ink yellow does not print, or stops at halfway printing on the page. I use genuine HP cartridges. There is a lot of ink - in fact, I just installed a new cartridge in the case where a previous (almost complete) was defective. No change. The pipe is not pinched. I flashed the firmware more recent and installed all drivers and utilities updated. I have cleaned the print heads over and over again and even took and cleaned according to the instructions.

  I think it was a sign that the printer is worn EXCEPT - just a few months ago, magenta and black stopped printing. These are the opposite printheads. When I uninstalled every bit of HP software I could find, the printer back to normal!

  The only thing I did not - it is the HP Toolbox argues that it is impossible to establish two-way communication with the printer. The patches for this involve get under the desk to play with the power cord and USB cable (even if it is a wireless printer), and my arthritic knees that make a very delicate operation. Two-way communication IS enabled.

  I'm about to start crying. I fought with this market a week, when the yellow all of a sudden went - once again, * most * of the time, but sometimes it prints to maybe an inch of the image before disappearing. Help!

  Hi @Echo2,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet Pro 8000 printer with a Windows 7 computer and all of a sudden is not printing yellow ink. I would like to help with that.

  Here is a document of support for the print quality problems - Troubleshooting print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

• 6700 Offiejet incoming fax in color will not print. How can I change this?

  The manual and online 'help' each say to change the incoming fax print option but do not say HOW TO DO THIS!  This work through the control panel of the printer or online or WHAT?

  Hello spahjrp

  What I found in the manual which has been if ECM (Error Correction Mode) is selected color faxes cannot be received or sent. Try to check if it is on / off. If off try toggling the option.

  To change the setting of the ECM from the control panel

  1. from the home screen, tap (right arrow), and then select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. Select the Mode of Error Correction.

  4. Select on or off.

• Photosmart 3310 - black ink will not print

  I replaced the black cartridge twice. All other color cartridges are full.

  Self-test report prints a few small black lines of points, and all the colored boxes are OK.

  Properties Print/print a test page shows the right Windows logo, and still some faint black lines.

  I did a clean print head, no change.

  Help!

  Found the answer here:

  http://www.fixyourownprinter.com/forums/inkjet/55519

• HP Photosmart plus b209a-metres will not print wireless

  This printer has had me very confused for a long time now.  When I got to the printer, I have had no problem in his wireless installation and be able to print things wireless.  But after that I had to restore my laptop I had a few problems.  I reinstalled and everything seems to work properly.  When I go in the settings of the printer and look at the wireless connection, he tells me that it is connected to my router, also when I look in my networks on my laptop, I see the printer.  But then when I want to print something wireless it tells me in the HP Solution Center that the printer is offline.  This makes absolutely no sense to me at all...

  I don't know what to do, I tried searching on google for 30 minutes for a solution, but I couldn't understand anything.
  Any help is greatly appreciated.

  Thanks in advance,
  Sweyko5

  Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• Red color does not print

  I have a L7555 running Vista. The red color will not print. I installed new cartridges and print heads clean. What should I do to fix this?

  Thank you!

  Here a link to a document that addresses the issues of print quality for your printer model. IT will give you the different troubleshooting steps to try in an effort to repair the printer output. If you try all the solutions listed in the document and it is not returned to a State of operation, sought to replace the product. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• yellow will not print photosmart c4280

  My printer will not print or scan colors yellow / green. It's a fairly new cartridge, so I don't know that I him have not used everything up and on the levels of food its fine. I don't get the error messages. And clean the heads of printing and the allinged I level 1 and 2.

  I advise to remove the Photosmart C4280 cartridges and clean the electrical contacts.  During this operation, I would go ahead and perform a reset of the ink system.  For more information about how to perform an ink system reset click here.

  In addition, there is a document for the resolution of bad color printing problems.  The document can be accessed here.

  • Also, try to run all 3 levels of the print head cleaning utility.  He is trying to force the ink holes in the print head to try to get back to the normal print quality.

  Let me know how it goes.

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP photosmart 5515 will not print black.

  HP photosmart 5515 do print not black, but is printed colors (cyan blue yellow). Printer shows full inks on all colors.

  There is a document with steps to help resolve a print quality problem where black ink will not print Photosmart 5515. This document can be found here.

  I hope this helps.

• New Photosmart 5520 will not print in black

  I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

  edgarlogcabin wrote:
  

  my printer hp 5520 will not print black

  The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

• Photosmart 5520: Will not print in black ink

  I did an interview on the print head, but it will not print in black. All other colors are fine and the ink is full so please tell us what can I do?

  Hey @Hughes23,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing in black of your Apple devices to your 5520 Photosmart e-all-in-one printer. I can help you with that.

  This document describes How to solve print quality problems with your printer. If you access all the steps to ask you to replace the cartridge or the printer service, instead contact the HP support directly. You can do this by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If this allows you to print, please let me know by clicking on accept Solution below my post. Also, I would like to know if you have any other questions. If not, have a great week!

• Photosmart 5510e-B111: printer will not print

  New Black XL Hp cartridge Installer - other almost exhausted cartridges. Printer prints NOT 'black '.

  Should EACH cartridge be replaced?

  Hi @Fred20,

  Welcome to the HP Forums!

  I noticed that your HP Photosmart 5510, will not print black. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, the printer prints blank Page or does not print black or color ink for the Photosmart HP 5510 e-all-in-One Printer Series. If the steps in this guide does not solve your problem, consider replacing color cartridges as well.

  This guide, that cannot print when one of the HP ink cartridges is empty, will have some additional information for you.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• C7180 WILL NOT PRINT YELLOW

  My C7180 printer will not print Yellow not, instead, it prints green.

  The yellow cartridge has been replaced several times, and they contain green ink does not yellow.

  I learned that the Lt Cyan or Cyan is a bleeding into the yellow cartridge.

  I emptied the yellow ink before you replace it with a new yellow cartridge.

  All other colors seem to be OK

  Is it possible to COMPLETELY CLEAN all inks, clean the head and install new cartridges?

  Hello 09irishman40,

  Thanks for being honest in describing what happened before the show.

  It's a hardware problem as the print head and the way by which the yellow ink will are damaged.

  I would recommend that you call the HP Technical Support.

  I don't know if the printer is under warranty, but then HP Technical Support could provide a better options for you in this situation.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• PHOTOSMART 5520 WILL NOT PRINT BLACK

  I just replaced the cartridges for my PHOTOSMART 5520.

  After that, color printing has no black color.

  All HP cartridges are not new.

  It's very frustrating.

  for some unknown reason, this problem is gone when I tried printing 2 weeks later.

  To summarize:

  I'm in the United States.

  I replaced the 4 cartridges again purchased at HP online.

  After that, the black will not print if I choose to print in color.

  But if I print in "black and white only", black is in fact works very well.

  I tried everything suggested in the web forum such as cleaning, alignment, prower AC cycle,... etc. He has not fixed the problem.

  I stop using the printer for 2 weeks. But yesterday, I try agin, then the problem is gone.

  I don't know what to say. Thanks to HP for assistance.

  Overall, the servie is nice - just called him several times.