Procurve switches update: should I shut down VMs on cluster that uses this switch?
I've update the firmware on our Procurve switch soon. It need to restart this switch. Should I close all the virtual machines on the cluster that this switch is used to communicate to our SAN via iSCSI?
I don't know that I made the question properly, then do not hesitate to ask for more information or clarification.
You want to disable HA on the cluster to blow course because if you don't switch redundancy to your ESX hosts you will have a failover of working capital. It would be advisable to stop or pause the VM as ise this switch for iSCSI storage access, however I did some tests on this and if no vm run they freeze literally just in time and as soon as the storage returns they pick up where they left off. I have to admit that I am impressed by the way the VM manages connectivity lose to their storage. That said you should technically their power off or suspend them.
SID Smith-
VCP, CCA (Server Xen), Hyper-V & SCVMM08 MCTS, CCNA and VTSP
http://www.dailyhypervisor.com
Don't forget to assign points for correct and useful responses. ;-)
Tags: VMware
Similar Questions
-
HP Pavilion 6510: Start Menu Shut Down tab always indicates that the updates are available
The Shut Down on the start menu tab always indicates that there ae updates available. This persists even after manually searching for and downloading updates.
Then Microsoft Fixit has been executed, the computer has restarted, and 5 updates have been installed. But the start menu still indicates that there are updates available.
This could be the cause?
How this should be dealt with?
Is there some updates that aren't installed properly, and if so this could affect the security of the computer?
Hello
Go here and download "never 10.
Run the program. It will turn off the Win 10 forced update.
Jay
-
How often should I shut down my PC?
Hello
I hope you don't mind me asking this question. I could not help but to know, using PC (laptop) is part of daily life, it is sometimes more than 10 hours to continue to run my laptop. So much pressure on it. In general, I'm used to shut down my PC each night before going to sleep and start the next day morning. We know all that I have other options are available also as keep my PC in standby or hibernate instead of shutdown. Now my question is what is the best way to practice in order to keep my PC in good health? I should everyday practical shout down and start over or I can keep it dormant until a few days etc. Which is good for practice? My PC is HP 430.
Thank you
Kind regards
Cyberkhan
Hello
Check with the HP Support and their documentation online.
There are a lot of opinions, but I prefer the way that you do now. Start and stop
the computer frequently causes the device to heat and cool a lot which is more stress
on the material while leaving work. If you go for 2 + hours power on the monitor
off anyway so you should have white for any period of inactivity. Stop when
It will be on all night is also a good initiative.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista shut down unexpectedly and repeatedly during use
After four years of perfect performance, my 64-bit Vista Home Premium is all the sudden closure about every hour... nothing in common on the programs I was using stationary (Word, Firefox, Thunderbird, usually). The "reccovered of the unexpected shutdown" dialog box shows the following:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: d1
BCP1: BCB1281D
BCP2: 00000002
BCP3: 00000000
BCP4: 9E686031
OS version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini033012-03.dmp
C:\Users\Tim\AppData\Local\Temp\WER-93203-0.SysData.XML
C:\Users\Tim\AppData\Local\Temp\WER54.tmp.version.txt
Hello, Tlundell,
Control 0xD1 bug: DRIVER_IRQL_NOT_LESS_OR_EQUAL
http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560244 (v = vs. 85) .aspx
It may be an old damaged video driver
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
Restart the computer and start typing the F8 key
Select Mode safe mode with networking
Download the following tool and run a scan complete to rule out malware
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16
Download the following tool. It will determine which driver can cause the problem
BlueScreenView-
http://www.NirSoft.NET/utils/blue_screen_view.html
When finished, reboot and let Windows load
Start > type CMD
Right-click on command prompt and select run as administrator
Type SFC/scannow
Press enter
Note: There is a space between sfc and / scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Start > type CMD
Right-click on command prompt and select run as administrator
Type chkdsk /f /r
Press enter
You will receive a message about the volume must be locked and you want to analyze during the recovery.
Press y and press enter
Restart the computer to start the scan
Once Windows restarts, open the event viewer > Windows Logs > application log
Find the Winninit entry that will display the results of the analysis
Go to update drivers and the manufacturer's website
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233If all else fails,
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html this tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx -
Jin
Sometimes, my keyboard stops responding, despite the checkist troubleshooting.
Then it works again after I have shut down and restart my mac!
is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...
What else could be?
I just replace the keyboard with a new one, but the problem persists.
my mac has also been in mac repair and they found nothing wrong.
Thank you!
Please run and view a report of EtreCheck http://etrecheck.com/
-
Set to automatic update froze on shut down - me I've really updated?
Automatic update stop windows properly during the night. After I forced a stop down and restarted, XP sp3 said an important security update has been installed on my laptop... but was it? How can I check to make sure the update really taken? Hardware Dell Inspiron E1505 laptop media Direct. I'm updated at 03:00, PST.
Hi dazed and Confuzed,
Thanks for posting. You can check the updates installed from the Add/Remove Programs window in Control Panel. There will be a box at the top where you can check to view installed updates. There are also third-party programs available that will do the same.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
should I shut down my computer every day
Should I close my hp desktop computer every day or let it run
Hello
This article may help you decide:
My experience: there are many computer facilities were broadcast to 10, or even 20 years without interruption and now nobody is willing to turn them off because they can never turn again. Talk to someone who has a few FEP (Front End Processor) currently underway.
Kind regards.
-
stop the configuration on my computer
Hi booklubber,
Thank you for visiting Microsoft Answers.
As these updates are very useful for your operating system works better, you must update these updates on your computer
1. download these updates on your computer.
2. try to install.If this is not possible in normal mode, then place the clean boot computer and install updates.
To perform a clean boot on a computer that is running Windows 7, follow these steps.
1. click on start toreduce this includes this image, type msconfig in the Search box and press ENTER. Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the Load Startup items check box.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
5. click on OK.
6. When you are prompted, click restart.
7. after starting the computer, install the updates.
If this does not work, try to reset the windows update components.
1. click the button to fix in the following link: http://support.microsoft.com/kb/971058
2. click run in the file download dialog box and follow the steps described in the fix it Wizard.Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.
Swati K - Microsoft support technician
Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite X 200-unexpected shut downs as soon as I use the SLI
I've always bought Toshiba as well for me and the company,
I bought a Satellite X 200 and as soon as I use the SLi makes the unexpected closure of the bottom computer...And the most important thing is that I paid a lot of money for it.
My old laptop performance :(
Feels like products are sometimes not tested until they sell.Anyone over with the same point of view on the Satellite X 200?
My friend has a X 200 and has no problem with SLI.
Have you tried other games? This game has maybe a compatibility issue with SLI.
You use the graphics drivers supplied by Toshiba? If you use drivers from a non-Toshiba source, it can cause problems of this kind.
Also update the BIOS and maybe try a new image (run recovery) if all else fails.
If it fails on a new image, then a video card may be defective.
-
COMPUTER SHUTS DOWN UNEXPECTEDLY, BUT STAYS ON USING AN EXTERNAL FAN BLOWING INTO IT
I have HP Pavilion P6130Y desktop for a couple of years now where later it turns off after about 10 minutes of being on. Once it turns off, it will remain only for a few seconds. The internal fans work properly. I opened the side panel, cleaning of the computer and the dust in the fans and put a regular House external fan blowing into it. With this fan blowing into it, the computer stays on and works perfectly. Any know if this is related to a heating problem or is there perhaps any other question that the computer might have? If so, should what parts I replace?
Hello
Check with HP support, their documentation online and ask in their forums known issues.
As it works with the fan added either something is too sensitive to normal even heat, or the
computer generates just on the edge of the system, or both.Certainly a hardware problem.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
-
my computer shuts down when I'm on why this happens?
When I go to any web site or play games it rnadomly stop then I HAV wait 10 to 15 seconds to turn my turn... After this intruder entered into my computer, it has started to do... I have to take it in a computer store have they fix it? or is it possible to try other things on my own?
Make sure that your Windows Firewall is enabled. If you are not behind a router, you can get one to take advantage of the hardware firewall as well. You can get them for as little as $15 these days.
-
Get your updated antivirus program and start safe mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
I hope this helps. Good luck. -
Although Internet Explorer seems to work and is usable, I get an error that says Internet Explorer is not working properly and will be closed. . Is not always close because it threatens too but sometimes it is. Any solution please? I have Windows Vista.
Hello
1 did you change on your computer before this problem?
2. What is the exact error message?Follow the suggestions and then check out.
Method 1
You can optimize the settings of Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/no
Method 2
You can reset Internet Explorer settings.
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will delete browsing history, delete all temporary Internet files, cookies, form data and password especially all stored
-
VAPP Shut Down Action - does not?
Hi all
I have a VAPP container configured with two virtual machines in separate groups. I have on each configured virtual computer (tab Start command) start and stop actions. For stop, I have everyone on 'Stop the guest PC' for he gracefully shut down the virtual machine. However, it seems that the VM is simply turned off and the "Guest Shutdown" option is simply ignored. I tried all the other options (Suspend, None etc) but when I stopped the VAPP - power of the virtual machine down.
Start Up works perfectly however.
What throws me a bit, is that when I right click the TIME to select "Shut Down" - she tells me that I have to stop my guests FIRST, before I stop vApp. Why is this? I thought it was supposed to manage the order of start and stop based on the order of the Group and delays etc.?
I should add that all this runs in a LABORATORY of 4.0 Vsphere (No. Vsphere updated applied yet)
Any help with this is appreciated.
Hello
You must use the 'Power Off' instead of 'Shutdown' option in the vApp. The 'Power Off' option stops the virtual machine according to your settings.
Best wishes / Saludos
-
-
Satellite Z830-10J battery discharge when the system is shut down
My new Toshiba Satellite Z830 10J ultrabook with Win7 64 bit. all updates, works fine and shows no anomaly, there is however a strange exception.
When the battery is completely charded and I 'pull the plug', the system runs on the battery for sometimes more than 5 hours, so I guess that the cycle of the battery is ok.
When the battery is now fully charged again and I SHUT down the system and not using it for a few days.
Then the battery is completely DISCHARGED to 0%, and the system does not start, until I plug.This phenomenon occurs in less than a week. So: loading of the batrery 100%, turn the system off, pull the plug, want to re - use the system after 7 days, yields 0% battery charge.
Is there a specific reason for this?
Greetings
Roland Schweiger
> It appears that one of the BIOS settings (disabling the sleep_and_charge or disable WOL) solved the problem
Great! Thanks for the comments!
Maybe you are looking for
-
How can I set up an alert for a WORK event, only from Monday to Friday? Marcela of Guardia The Panama Republic
-
Satellite C650 - error reading disk and the recovery disk does not work
Hello I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet. I made a Windows 7 recovery disk using my other acer laptop which
-
iTunes movies take place HD - options
Hi all My iTunes movie downloads are taking too much space on my hard drive. The obvious option is to move to an external hard drive, but then I lose the ability to watch them when I take my MacBook out of the House (unless I take an external hard dr
-
Hello, I am looking for a sollution to my problem. I have a PID, and the output is 0 to 100%. The low position of the servo is 48, the highest position is 18. I would like to have a vi that corresponds to 0-100% to 48-18 range of values. So 0-> 48 10
-
password for bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out, after the installation of Windows 10 upgrade.on window7 it worked fine, I never put a password. need help to get into the bios I thank you again once the code