Satellite Z830-10J battery discharge when the system is shut down

Similar Questions

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

  I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the PC is shut down, the printer goes offline. I have to restart the installation time and time again to bring wireless online. I added the MAC address of the Belkin router and I have the camera had confidence in my Norton Firewall. I keep seeing "HP Network Support Automatic (delayed start)" in services, but by changing it seems to make a difference, I still need to run the installation once after the system is shut down. I see also two printer icons in devices and printers. We're just the Photosmart printer with a generic printer icon; and the second is Photosmart printer, Scanner, copier with a picture of the Photosmart which I believe it should be. I ran the installation at least 10 times and I get a good wireless system work then after that the machine is stopped for the day the printer is offline and do not print. How can I stop the printer goes offline in wireless mode?

  I solved the problem.

  I put the IP address to the MAC address of printers in the router.

  I put the printer to TRUST in the network settings on Norton Security Suite.

  The printer works wirelessly all the time now.

• When the unit is shut DOWN Satellite 2400 lock

  My camera is a 2400. Recently, when I try to shut down using Win XP it works until the message "windows will now stop." At this point, the image freezes with the pointer of the mouse in place. I installed a new HD with a new OS Win XP Pro. I downloaded all the drivers including Bios Update. It seems that my English is unsufficent bec I have to install via Boot Bios and turn on I have to hold down the TILDE KEY. What is c? If someone has encountered this problems of freezing closing system and if so what is the remedy? I also found a message from sys telling me the BASE SYSTEM DEVICE has a? What is a BASIC SYSTEM DEVICE?
  I appreciate your help in this matter. TNX and lots of XZEXZ ++? René

  [Edited by: admin on 21 January 06 11:17]

  Hello

  The base system device is usually drive card or PCMCIA slot or both. Some manufacturers of laptop to group a set of drivers and call "Chipset" even if it includes more than the chip set.
  I guess you didn't install the driver chipset or you have it install but in the wrong order. The chipset driver must be installed first.

  Well, windows want to stop because some background processes are running or due to a failed OS. I guess that this problem doesn't occur with the Toshiba Recovery CD because all the drivers are installed properly.

  On the procedure of BIOS:
  Please check this page from Toshiba. You will find an instructions how to upgrade the BIOS.
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  But please note: the incorrect BIOS or an incorrect procedure may damage the motherboard. First, you need to check if the new facility with the restore CD will solve the problem before you start the update of the BIOS!

  Good bye

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• Overnight battery discharged when the satellite has been turned off

  Hello

  This has happened again. My battery empties 25% from one day to the next and will be completely discharged in a week. The machine is not in hibernation, it is completely shut down. If I charge the battery and remove it from the machine it does not lose cool, which indicates a draining of the laptop. Any ideas?

  Hello

  Maybe this will help you a bit:

  I found this useful Toshiba paper on this topic:

  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  This can happen if the wake on the service LAN (WOL) by the built-in LAN module is turned on

  Please check!

  -----------------------
  By the way; the loss of 2 to 4% of the power of the battery during the night is a normal state.

  For details see this
  http://support.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• The drain of the battery even after the computer is shut down.

  I just bought a Sony Vaio and notice that the battery drains approximately 10% per day when the computer is turned off.  Any idea? It's a phone fault, I should return it for an Exchange.

  Hello t. Lee.

  This is a normal operation of the computer. You can check the link provided for the below detailed information: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C223674

  Note: If my post answered your question, please mark it as an "accepted Solution".

• OfficeJet 5740: Officejet 5740 extension of the tray only retracts when the device is shut down, it should?

  When I turn on my OfficeJet 5740 fate tray Extender as it should. When I disable the extension of the printer tray retracts. The extension of the tray is supposed to retract when the printer is stopped or not?

  Hi @Nemecci,

  Welcome to the HP Forums!

  I checked into it to be sure, as our laboratory machine was not back either, and this is a normal behavior. The output tray has an auto deployment feature so that the printer ejects automatically to catch the paper, but he retracted, that part is up to you

  Hope that answers your question! Have a good!

• Wake On Lan doesn't work not to when the PC is shut down

  Hello

  I plug just the HP all-in - One 200-5110 win7 64-bit and I'm pretty happy with it, everything works fine and I finished the installation but I can't do the work of Wake On Lan (wol) when you clean shutdown of the pc.

  The Office uses the same cable, same switch port with my former 6 year old computer that had no problem alarm since the closure.

  The BIOS I see no parameters, the network card has the latest drivers on the HP site, and I think I tried all possible combinations of settings in network properties. The only way that Office wakes up correctly is to Hibernate or sleep state.

  Here are some screenshots of my settings:

  http://img713.imageshack.us/img713/1424/clipboard1k.jpg

  http://img14.imageshack.us/img14/8003/clipboard2tp.jpg
  http://img406.imageshack.us/img406/1/clipboard3.jpg
  http://img31.imageshack.us/img31/4227/clipboard4k.jpg
  http://img521.imageshack.us/img521/124/clipboard5.jpg

  Anyone have an idea on how to solve this problem? Did I miss something or an option?

  Thank you in advance.

  Kind regards
  Vassilis

  For WOL to work when the computer is OFF, this feature must be enabled in the BIOS > Power. If there is no option, this feature does not work when the computer is turned OFF.

• Updates required when the computer is shut down.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  Update in Windows and connected to the Internet with a little time on your hands and knowledge.

  Open Internet Explorer, go to http://windowsupdate.microsoft.com/ and do CUSTOM scan and determine what updates you need.  Install them.  Reset.  Repeat the visit, CUSTOM and see if updates (one of those that you just installed) back upwards.  Just list those here (KB #)...

• Vista - when the computer is shut down, continue to get the same updates offered and does not

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  Everytime I go I turn off I get this update. It happened now 57 times in the last month. It seems that the downlaod fails when checking for details. Is it possible that I can remove the update total.

  * original title - Codes *.

  How to hide updates or restore the hidden in Windows Vista updates
  http://www.itechtalk.com/thread5013.html

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Your problem can be solved or answered if you post on the forum of Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• "dla works for someone else, still you want" when the computer is shut down.

  Original title: SONIC DLA

  When I stopped, I get "dla is running for another user, you want to keep" what is sonic dla and how calm he stop stop?

  http://www.Roxio.com/enu/products/dla/overview.html

  It stipulates that Roxio has returned sonic and can resolve incompatibility errors.

  That being said, what is the make, model and the model number of the pc?

  you will need to go to the manufacturers Web site and search for updated drivers.

• Message "CCSVCHST. EXc always current, end program now? "when the computer is shut down.

  Original title: ccsvchst.exc

  When I stopped my PC there is always a box for the message "CCSVCHST. EXc always current, end program now? "What is it, and if I can remove the program?

  It is a problem with norton

  or visit their Web site and updated with the live update tool or uninstall norton by using their tool to remove and reinstall.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  romoval tools

  http://community.Norton.com/T5/Norton-Internet-security-Norton/ccSvcHst-exe-error-on-shutdown/TD-p/496952

  thread to discuss the issue.

• S2716DG buttons layout market/Menu does not, the Image block when the computer is shut down

  Hi all

  I had my monitor for about two weeks and it works fine, but yesterday the menu and power buttons unresponsive. The light on the power button is also disabled. If I turn off my PC the picture hangs at the screen closed until I have turn the computer on. Otherwise, the screen seems to work very well. I have not tried to unplug it and by him plugging back in since it's my only monitor at the moment and I won't be able to use my PC the case. Anyone know what could be causing this?

  Thank you

  Not sure, but you should try resetting the monitor =
  * Turn off the monitor
  * Unplug the monitor power cable and all other cables from the rear bottom side of the monitor
  * If a mechanical monitor power button / power off, press the button in 30 seconds (erases all residual power in the circuits). If not a mechanical, just power button wait 30 seconds
  * Reconnect all cables and retest