Profile lens Corrections problem

Similar Questions

• Support for profile lens corrections are not not in Lightroom 3.2

  I installed the Lightroom 3.2 update, which includes the list of support for the 'Canon EF 50mm f/1.8 II' lens.  I pulled a number of pictures with this lens (using a Canon T1i) and load them into Lightroom.  In the metadata for the photos, the lens was called "EF50mm f/1.8 II.

  Within the "Lens Corrections" section of Lightroom, the option 'Auto' reports "Could not find a profile matching automatically."  I tried manually to the list of Canon lenses, and it is not on the list.

  In the folder
  / Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Canon/
  I see a file corresponding to this objective
  Canon EOS 5 d Mark II (Canon EF 50mm f1.8 II) - RAW.lcp
  but it is not with only one specific body.
  I tried to manually install the update to Camera Raw 6.2, but he noted "update is not applicable."  Given the above file, I suspect that it was already installed.
  In the release notes, which entered the Canon EF 50 mm f/1.8 II lens, it does not mention that the support was limited to only a certain camera body.  Could someone help me please?  Thank you!

  http://forums.Adobe.com/message/3105679#3105679

• ACR profiles - Lens Correction error?

  Looked everywhere and do not receive any further on the track. I use a Nikon D600 with a Sigma 12-24mmD 4.5 ~ 5.6 DG HSM lens.

  The software is Photoshop/Lightroom CC.

  

  .. .but when you select the Lens Correction it do not work. Main pet peeve of things like the seats on these dining room chairs, they are only about half as wide as the picture shows.

  It's just something that can be fixed or is it just a limitation of the lenses full frame wide angle extreme?

  I am now bald... so you can guess how much hair I pulled on it!

  It's just the result of a lens wide angle. the lens correction attempts to correct the distortion as Pincushion and barrel distortion, but who can make the point of view of even worse edge.

• Panasonic Lumix FZ1000 lens corrections?

  I am under Lightroom 6 on Mac (with Yosemite). Although the Panasonic Lumix FZ1000 is in the list of compatible camera, there seems to be no available profile lens corrections and Panasonic does not appear in the list of manufacturers. I misunderstood the situation.

  For cameras Panasonic and Olympus, the automatic lens profile correction is supported on all the raw files from cameras Micro Four Thirds.

  You a create your own manual profiles.

  https://helpx.Adobe.com/x-productkb/multi/lens-profile-support-Lightroom-4.html

• Lens correction profiles

  Hi gentlemen,

  I work with Adobe Camera Raw 8.7.1 on Mac OS Yosemite.

  When I try to use the automatic lens correction, the program cannot load profiles.

  I see a lot of profiles in the list of cameras and lenses, but when I click on the profiles, some profiles fuctions and others not.

  I have two cameras, Fuji x 100 and canon 5dii with 24-105.

  I have never had any problem with lens correction, but now it does not work well. I tried to install the latest adobe Dng converter to update the profiles of the lens, but it does not work well.

  If I choose other profiles, some profiles works well, I do not understand why...

  can you help me, please?

  Thank you

  Well, try reset again. Here are the videos that should help you:

  Benjamin

• Not able to load Raw camera lens correction profiles

  Hello

  as the topic says... I am not able to load profiles of correction of lens and still get the error message. I have the latest version (member of creative cloud) of Photoshop CC 2014 15.2.2 and my Mac OSX is up-to-date. With older versions (when I start from a backup, it works very well! So, what can I do? I don't want to run the PS of my backup folder... He got to work with the real version as well. I change nothing... already tried uninstalling and reinstalling the PS but it didn t solve the problem.

  Possibly a reset for Bridge and Camera Raw is in order. First of all, near bridge. Now to organize your Cmd + Opt + shift restart you. A box will appear; Place a check mark on the options and click 'ok '. Now, even once, Cmd + Opt + shift as you "open in Camera Raw."

  See is this help.

  Benjamin

• I have CC 2015. When I'm working in camera raw under lens Corrections no profile tab is displayed.  What is happening with this?  I have a color tab and a manual tab but no profile tab.

  I have CC 2015. When I'm working in camera raw under lens Corrections no profile tab is displayed. What is happening with this? I have a color tab and a manual tab but no profile tab.

  Hi stephenr,.

  When you open a raw image in Photoshop, it will open in Camera Raw first and you would be able to see the profile tab of sub Lens Correction

  However, when you go to the filter menu > filter Camera Raw > then tab of profile is not supposed to be there, and this is the expected behavior.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• I see my profile file of Sigma lenses in the Lr5.7.1 folder - but I can't select it in the drop of Lens Correction

  Hello

  I see my exact Sigma lens profile in my Lr 5.7.1 record (SIGMA 150-600 mm F5-6. 3 DG OS HSM C015)-RAW.lcp)- but it's as an option in the dropdown of my Module development lens Corrections unselectable.

  I see it in C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sigma\Canon

  Sigma Sport version is just next to it in the folder - and it's the only one I can see and select, its name is the same direction except the last part of names p014

  How can I make MY selectable lens in the drop-down list?

  Thank you

  OK - I thought about it!

  I stuck the lens profile to:

  C:\Users\XXXX\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0

  no other profiles were in it - but after pasting the profile here - he appeared in Lr... YAYY

• Can I just apply Lens Corrections profile without fixation of the Chromatic Aberration on import?

  Hello

  I work with lightroom on OS X Yosemite 10.10.2 5.7.1

  I built a lightroom preset with "lens Corrections/Lens profile Corrections" checked as well as the 'process' and 'Calibration '. They are the only 3 boxes checked and therefore "Aberration of Corrections / chromatic lens" is not checked.

  The preset apply lens profile correction successfully when I use it in the develop module. However, when I use it on import, the 'remove the Chromatic Aberration' box ends up also being checked in the develop module lens Corrections Panel.

  Is this normal?

  Can I just apply Lens Corrections profile without fixation of the Chromatic Aberration on import?

  Concerning

  'Remove the Chromatic Aberration' is probably from your default development module settings. I don't know if it is the default value for the installation, but you can change it. You will need to do this for each camera model that you use:

  (1) open a raw file in the develop module and click on the Reset button at the bottom of the right panel area. This returns all your development settings to their default settings.

  (2) check or uncheck the option 'Remove the Chromatic Aberration' under correction lenses as you wish.

  (3) press and hold the ALT key and then click on the button Reset, which should now say "Set Default".

  (4) in the pop-up, click "Update to current settings".

  (5) fact

• Can LR5 automatically apply the lens correction profiles to import?

  Rather manually using correction lenses profiles to images each time to correct an image and then synchronize with the rest, I would like LR 5 to automatically apply the correction of the objective appropriate (whether by EXIF info or "default" profile) when importer by the camera (map).  Does anyone know a way to do this?

  Herb

  Hello

  Simply create the adjustments you want to apply to the set of pictures / images, i.e. the lens corrections and save them as a preset in the develop module and then apply the preset upon import. The import module allows you to select a developing 'settings' preset using the Panel applies when importing.

• Canon powershot G15 lens correction profile 4.4 lightroom

  No matter who builds a profile of lens for canon powershot g15 correction?  I am new to lightroom and can not see this camera on the lens correction list, although my pentax DSLR is here.  any help gratefully appreciated - I am very new to lightroom so that the silly language of evidence any help greatly appreciated.

  Yes redkaz,

  If you go to the main lightroom forum page, on the right side, there is a section of resources.

  

  Press 'submit a feature request or bug '. Here, you can submit a feature request and vote for others.

  Please let me know if you have any other questions,

  Janelle

• Profiles of lenses of Photoshop CS6 No. (lens correction filter) for Canon 6 d raw files

  LightRoom and Camera Raw have Lens Correction profiles and all lenses available today are in the list for the Canon 6 d of the raw files. BUT the Correction of filter/optics if Photoshop CS6 only have 2 Tamron lenses listed. Weird that there are a of the profiles of lenses for the Canon 6 d raw files in Lightroom and Camera RAW, but not CS6 filter/Lens Correction.

  Camera RAW, LR and PS are up-to-date... NOTE: I have a Canon G11, 7 d and 1 d Mark II N and all their files work as expected. It's only the RAW files created by Canon 6 d.

  All of the suggestions.

  To the right of where it says the search criteria, click on the small icon of three bars-arrow and uncheck the Match sensor size and should learn more.

• Is it possible to use automatic lens correction profiles in Camera RAW using Extendscript?

  I developed some Javascripts use Extendscript toolkit to help me process batches of files to create videos of time, and

  I would like to take advantage of the automatic lens correction profiles available in Adobe Camera RAW (I use Adobe Photoshop CS6 64-bit), but in the CameraRAWOpenOptions, there is no property describing automatic lens correction profiles.  It seems that there must be a way to automate the selection of the checkbox "Activate the profile of lens Corrections" at the opening of RAW images from the camera.  I use Canon lenses and large Adobe lens correction profiles work, so I want to use them.

  I am aware of the other way to do this Photoshop using file-> automate-> Correction of the lens, but it seems to work more slowly than to use the lens correction in Camera RAW.

  Thank you.

  You don't need to bother... just set your camera Raw "Defaults" to include allow Corrections lenses profile and check the Auto CA correction. Then go to the ACR contextual menu and choose Save new Camera Raw default... Note: If you have your ACR preferences to have separate by default based on the serial number of camera and ISO, you will need to save by default, separate for each camera and ISO values you use.

• Lens Correction profiles: unable to locate matching profiles automatically

  LR3, I can't load the profiles of correction of auto lens for my Canon lenses, which many should be easily accessible. I used the 24-70L 2.8 USM lens and 50mm 1.4 on a recent session lenses and profiles could not be found. Is there a place to download the profiles of LR3 stocks to activate this option? I'm not interested in doing profiles customized right now otherwise.

  Here's what I see:

  

  

  Thanks for any help.

  From Adobe lens profiles should be installed automatically during the installation of LR, not need to install them separately. You can see the files named

  • Canon EOS - 1Ds Mark III (Canon EF 24-70mm f2.8 L USM) - RAW.lcp
  • Canon EOS - 1Ds Mark III (Canon EF 24-70mm f2.8 L USM) LCP
  • Canon EOS - 1Ds Mark III (Canon EF 50mm f1.4 USM) - RAW.lcp
  • Canon EOS - 1Ds Mark III (Canon EF 50mm f1.4 USM) LCP

  in the folder

  • WinXP:
    C:\Documents and Settings\All Users\Local Settings\Application Data\Adobe\CameraRaw\LensProfiles\1.0\Canon
  • WinVista or 7:
    C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Canon
  • Mac:
    Macintosh HD/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Canon

  Here are the profiles provided by Adobe for the lenses you mention. If they are there, something seems to be wrong in LR recognizing your goal. If they don't, try to reinstall LR3.

  Gossweiler beat