Profile of crèche and external LDAP

Similar Questions

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• is it possible to use two external LDAP and authentication of external Table?

  Hi, is it possible to use both external LDAP and authentication of the external table?
  
  they all need two initialization blocks to access a session system variable, USER?
  
  Thank you

  Hello
  I don't think it's possible to impliment the LDAP authentication both extenal together. The reasons are,
  1. we cannot define two sources (LDAP and Extenal DB) in the same blocks of justine initialization user information.
  2. If two different (one for LDAP) initialization blocks and one for extenal DB are used, we cannot use variable USER twice it's a defined system variable.

  Thank you
  Swami

• BEA WebLogic Server 8.1 IS an external LDAP Configuration supported?

  Hi all

  We have server BEA Weblogic 8.1, and we intend to add the external LDAP authentication to the web application deployed on weblogic.

  Is BEA Weblogic server 8.1 support external LDAP OmniPass?

  Please help me.

  Thank you

  Ankit Patel

  Hi Pierre,.

  Yes, we can include external services Ldab here.

  http://docs.Oracle.com/CD/E13222_01/WLS/docs81/secmanage/providers.html#1109511

  • Configure a new iPlanet authenticator...
  • Configure a new authenticator realm adapter...
  • Configure a new Active Directory authenticator...
  • Set up a new default authenticator...
  • Set up a new default identity Asserter...
  • Configure a new authenticator OpenLDAP...
  • Configure a new authenticator of Novell...

  Kind regards

  Kal

• External LDAP user not authenticated

  Hello

  Using Weblogic 12.1.2 I created an Active Directory authenticator and can connect to our Windows Active Directory so that it will give the list of users, that I care to see in the 'Users and groups' tab of the Weblogic administration console.  However, when I try to use my Java process authentication, it indicates that the user cannot be authenticated (LoginException java security survey).  This same code works in a different environment with Active Directory configuration.  If I use our weblogic user default ' local' (one who is allowed to start the server), I do not see the exception and the user is authenticated.  Anyone know how I can get my "external LDAP user" to authenticate and why he would be treated differently from a 'local' user or why it would be different depending on the environment?

  Thank you!

  Hello

  Able to connect to the weblogic console you use Active directory users.

  1. check if you are able to see all the users in the Weblogic console.

  Areas of security ===> myrealm ===> users and groups

  2. also did you add the user or group in the global section.

  Take a look at the link for the reference of AD with Weblogic configuration below.

  Configuring Active Directory with Weblogic Server 10.3.6 - weblogicexpert

  3. check control flags what took.

  Defined as "SUFFICIENT".

  It may be useful

• External LDAP for UCM

  Hello.
  Is it possible to use the external LDAP server for my server of the University Complutense of MADRID without using external LDAP server for my server admin?
  Here I have a domain with the administrator of the server and the server of the University Complutense of MADRID.
  My server admin is not external LDAP.
  Therefore, it is possible to use external LDAP server for my AAU server in such situation?
  
  And if it's possible, could you give me some information about this?
  
  (Sorry for my English)

  You must complete all of the requirements specified in the manual. For example:

  "LDAP: a connection initiated at a LDAP (Lightweight Directory Access Protocol) server to manage the access of external users to the content server instance.". This provider type is supported by the Active Directory Ldap component, which is installed (disabled) by default during the installation of the u. From 11 g Release 1 (11.1.1) its functionality is replaced by JpsUserProvider, especially for nested group support. »

  Note that the LDAP directly at the Complutense University of MADRID connection is more similar to 10g. 11 g, it is expected that user identities (as well as database connectivity) is set to Weblogic domain level.

  You can share the reasons why you want to by-pass Weblogic domain?

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock

• Satellite A215-S4747 (internal and external) microphone does not work

  Hello

  I write about my wife by Satellite A215-S4747 running Windows XP.
  A few months ago as the built-in microphone and external microphone has stopped working.

  This made me think it was a driver problem, although no issue in
  Control Panel > sounds and Audio devices > equipment for all drivers.

  I went through the Troubleshooting Wizard, but that did not help.
  I went and downloaded drivers RealTek HD Audio (R2.67), but that didn't fix it.

  Any help is very appreciated.

  Thank you

  Peter

  I want to emphasize that this machine is about 6 years old, making the possibility of some parts break most likely...

  Hello

  Sound works. Right? Well well, in that case I n t think that it is an audio driver problem.

  First of all, I think you should check some basic settings.
  (1) mic device.
  Go to the control panel-> sounds and Audio-> Audio-> sound recording devices
  Here you check if device right microphone has been selected

  (2) mic volume
  Go to the control panel-> sounds and Audio devices-> Audio-> audio-> Volume
  Here you check if the volume is at max level
  Additional button Advanced should be available at the bottom of the mic volume control click that it and check if the mic push in checked.

  Have you installed some tools or software which may affect (disabled) the microphone?

• Best practices for storage and backups on internal and external drives

  Hello

  I have a Mac laptop and I would like your advice on how to organize the storage of files on internal and external drives and how optimizes it the backup plan.

  From now on, my organization of file storage is:

  I keep my most important files on the internal disk of SSD encrypted and less critical files on an encrypted external drive (format ExFAT). This external hard drive was errors, so I bought a new Laetitia 2 Tb drive that I formatted in Mac OS journaled with encryption instead of ExFAT, to replace.

  For backups, I do not use Time Machine, but I use an application that synchronizes files between two disks. By using this application, I first sync the essential document on the SSD files internal to the external drive, and then I synchronize all the external drive to another external drive.

  My question is, if I keep this Organization of file storage or I should, for example just move all my files, critical and non-critical for the internal SSD (I could make enough room for that) and then backup up the whole Mac with Time Machine? Or there is a better way to organize files in this scenario?

  The second question is, if it is better to keep the Organization as it split storage (internal, less critical on external criticism) is what would be the best way to back up everything?

  Thanks in advance for all contributions.

  First of all, to the ExFAT is the problem, I suggest that the reader will just physically hurt.  ExFAT is perfectly acceptable as a format where Mac and PC can read/write.  You may have reacted a little leaving ExFAT for HFS, but you have made your choice and adapts to it.

  Here is how I operate my backups:

  I use CCC (CarbonCopyClone, $40, bombich.com).  It copies the boot sectors, drive, mapping, recovery Partition (these three are 'invisible' to DiskUtility for most) as well as system partitions and data records 'other'.  These other disks may be internal for clone-to-test-new-OSX in multi-disc systems or external for backup purposes.  The beauty is that you can start an external clone in a system crash, then CCC will be re - copy the active external clone on a new/fixed internal drive.

  Encryption isn't something I know, but... If only the content of the system partition and data is encrypted, it * could * be OK for clone-back to partition-as-encrypted partitions.  If you clone internal external the external partition is active and copy the 'encrypted plan', while small adjustments are made so that the race could be bad.  Copy of the files on my partitions unencrypted change interrupt because they are individual files.

  As an alternative, you could have a system drive that does CCC charge, let the clone encrypted and encrypted internal idle and just copy the entire map with the 'third system' active.

• Mac Pro, Flash Storage, Dropbox, and external storage Solutions

  I am considering a Mac Pro to a computer in the enterprise. I hope someone can give an overview and experience with the dilemma of using a computer with a small amount of storage on board, dropbox and external storage devices.

  Background:

  Mac Pro storage on board - The Mac Pro has limited onboard storage. It comes with a 256 k flash memory and is apparently expandable to 512 or 1 TB. But, I can not even know where to buy the storage upgrade. For some reason, it seems even to be available for purchase on Apple's site. I can't understand how much it costs or where to buy it. I found a link showing how to install it, but that's all.

  Dropbox - Dropbox is an important part of the company, or at least my business. The tricky thing is that Dropbox doesn't seem to work very well if this does not work on an operating system main hard drive. I tried once on a Mac Mini Server, and it does not work well. I read on the Dropbox site that it doesn't work so well. The small amount of storage on board available for the Mac Pro means that it is necessary to use an external drive, which is fine with me, with the exception of the question of Dropbox. Is anyone here from an experience with this problem.

  External storage - the question here is as stated above. How to get an external drive on a Mac Pro, the operating system is not installed on, to work properly. I know that most people could read this and suggest to go to the website of Dropbox support for more information. I was able to do that and have nothing. Looking for Mac people who could potentially experience.

  In short, how the hell you upgrade Mac Pro flash storage... where do you get, and how much it costs?  And second, anyone experience using Dropbox on a Mac Pro, where the Dropbox folder is not located on the operating system drive.

  Thanks for any help that can be provided.

  -Apple does not sell to replace internal storage.

  -You can often find storage on eBay and other places. However, isn't that all in storage for some MacBook Pro model will work in the Mac Pro is much slower. One way to tell is that the MacBook you do not have a heatsink on them while the Mac Pro.

  -You can buy external storage Thunderbolt. To access only a disc both an external case USB 3/disc is about as fast as Thunderbolt. Can get pregnant using the portable 2 1/2 standard SSD

  -I did not all the posts here for the use of DB on an external drive.

• Impossible to listen to the music or sounds using internal and external speakers

  Original: connect external speakers

  I have an Acer Aspire Z5700 all-in-one computer.  I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?

  Hi Joseph,.

  I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
  You can play music using any one option at a time, either the internal speakers or external speakers.

• Brewing between internal memory and external memory SD card

  The Sansa Clip + shuffle between songs on the internal memory and the external memory SD card; or are they seen as different to play songs stored on the internal and external SD card? I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB? Or should I spend inside out manually to hear the songs loaded on the external SD card?

  dohar9 wrote:

  The Sansa Clip + shuffle between songs on the internal memory and external memory SD card?

  Yes.

  I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB?

  In theory, Yes. In actual practice, but it will be probably closer to 10.75 to 11FR.

  Or should I spend inside out manually to hear the songs loaded on the external SD card?

  N ° the player will play seamlessly two memory slots when you use the random mode.

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• while trying to reset to fix the slowness, firefox never finished, so I closed it, now it says my profile is not valid, and nothing will load.

  while trying to reset to fix the slowness, firefox never finished, so I closed it, now it says my profile is not valid, and nothing will load. So I have no possibility to repair. I tried to anUpgrade, but which resulted in the same situation.

  Sorry, when an update is interrupted, it can happen. Please start by creating a new profile. There is no data in it, but it will get us started.

  You will start the Firefox profile manager using the Windows Run dialog box (hold down the Windows key and tap R) or the system Windows 10 search box. Paste the following and press ENTER:

  firefox.exe -P
  

  This should start a small window.

  Click on the button to create a profile, assign a name like OldSettings and ignore the ability to move the profile folder. After you create the profile, select it and start Firefox in this profile.

  I guess that Firefox works?