Profile VPN (tunnel group) under the same IP pool

Similar Questions

• No traffic through the VPN tunnel but at the same time

  Hey everybody,

  Good enough at the end of my VPN configuration but I have a question. The VPN connection is established and the remote computer can set up a VPN with my router (phases 1 and 2 are ok) but I can't ping all devices on both sides. I think it might be something about the acl. I created an acl that I linked with my group of vpn, what should I do something with the card?

  Here is the configuration of the router

  AAA new-model

  !

  !

  local AuthentVPN AAA authentication login

  local AuthorizVPN AAA authorization network

  !

  AAA - the id of the joint session

  clock timezone GMT 1 0

  clock summer-time recurring GMT

  !

  IP cef

  !

  DHCP excluded-address IP 192.168.0.1 192.168.0.99

  !

  Authenticated MultiLink bundle-name Panel

  !

  VPDN enable

  !

  VPDN-group MyGroup

  !

  !

  model virtual Network1

  !

  username admin privilege 15 secret 4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  !

  redundancy

  !

  crypto ISAKMP policy 1

  BA aes 256

  preshared authentication

  Group 2

  life 3600

  !

  ISAKMP crypto client configuration group myVPN

  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx key

  DNS 192.168.0.254

  pool IPPoolVPN

  ACL 100

  !

  !

  Crypto ipsec transform-set esp - aes esp-sha-hmac T1

  tunnel mode

  !

  !

  !

  crypto dynamic-map 10 DynMap

  game of transformation-T1

  market arriere-route

  !

  !

  list of authentication of crypto client myMap AuthentVPN map

  card crypto myMap AuthorizVPN isakmp authorization list

  client configuration address map myMap crypto answer

  card crypto myMap 100-isakmp dynamic ipsec DynMap

  !

  the Embedded-Service-Engine0/0 interface

  no ip address

  Shutdown

  !

  interface GigabitEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  PPPoE enable global group

  PPPoE-client dial-pool-number 1

  No mop enabled

  !

  interface GigabitEthernet0/1

  LAN description

  no ip address

  automatic duplex

  automatic speed

  No mop enabled

  !

  interface GigabitEthernet0/1.1

  LAN description

  encapsulation dot1Q 1 native

  IP 192.168.0.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  IP tcp adjust-mss 1452

  !

  interface Dialer1

  MTU 1492

  the negotiated IP address

  IP access-group RESTRICT_ENTRY_INTERNET in

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  Dialer pool 1

  Dialer-Group 1

  PPP authentication pap callin

  PPP chap hostname xxxx

  PPP chap password 0 xxxx

  PPP pap sent-name of user password xxxxx xxxx 0

  crypto myMap map

  !

  IP pool local IPPoolVPN 192.168.10.0 192.168.10.100

  IP forward-Protocol ND

  !

  IP http server

  23 class IP http access

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  The dns server IP

  IP dns primary GVA. SOA INTRA NS. GUAM INTRA [email protected] / * / 21600 900 7776000 86400

  IP nat inside source list 10 interface Dialer1 overload

  overload of IP nat inside source list 11 interface Dialer1

  overload of IP nat inside source list 20 interface Dialer1

  overload of IP nat inside source list 30 interface Dialer1

  overload of IP nat inside source list 110 interface Dialer1

  IP route 0.0.0.0 0.0.0.0 Dialer1

  Route IP 192.168.0.0 255.255.255.0 GigabitEthernet0/1.1

  IP route 192.168.1.0 255.255.255.0 GigabitEthernet0/1.2

  !

  RESTRICT_ENTRY_INTERNET extended IP access list

  TCP refuse any any eq telnet

  TCP refuse any any eq 22

  TCP refuse any any eq www

  TCP refuse any any eq 443

  TCP refuse any any eq field

  allow udp any any eq 50

  allow an ip

  !

  Dialer-list 1 ip protocol allow

  !

  !

  SNMP - server RO G community

  public RO SNMP-server community

  entity-sensor threshold traps SNMP-server enable

  access-list 10 permit 192.168.0.0 0.0.0.255

  access-list 11 permit 192.168.1.0 0.0.0.255

  access-list 20 allow 192.168.2.0 0.0.0.255

  access-list 30 allow 192.168.3.0 0.0.0.255

  access-list 100 permit ip 0.0.0.0 0.0.0.255 192.168.0.0 0.0.0.255

  access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255

  access ip-list 110 permit a whole

  I don't know if it useful, but here is the view the crypto ipsec command his:

  Interface: Dialer1

  Tag crypto map: myMap, local addr 213.3.1.13

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.10.12/255.255.255.255/0/0)

  current_peer 109.164.161.35 port 49170

  LICENCE, flags is {}

  #pkts program: 5, #pkts encrypt: 5, #pkts digest: 5

  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  Errors #send 0, #recv 0 errors

  local crypto endpt. : 213.3.1.13, remote Start crypto. : 109.164.161.35

  Path mtu 1492 mtu 1492 ip, ip mtu BID Dialer1

  current outbound SPI: 0x54631F8B (1415782283)

  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:

  SPI: 0x8C432353 (2353210195)

  transform: aes - esp esp-sha-hmac.

  running parameters = {Tunnel UDP-program}

  Conn ID: 2033, flow_id: VPN:33 on board, sibling_flags 80000040, crypto card: myMap

  calendar of his: service life remaining (k/s) key: (4212355/1423)

  Size IV: 16 bytes

  support for replay detection: Y

  Status: ACTIVE (ACTIVE)

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  SPI: 0x54631F8B (1415782283)

  transform: aes - esp esp-sha-hmac.

  running parameters = {Tunnel UDP-program}

  Conn ID: 2034, flow_id: VPN:34 on board, sibling_flags 80000040, crypto card: myMap

  calendar of his: service life remaining (k/s) key: (4212354/1423)

  Size IV: 16 bytes

  support for replay detection: Y

  Status: ACTIVE (ACTIVE)

  outgoing ah sas:

  outgoing CFP sas:

  And on the side of the customer, when I go to the status of--> statistics, all packages have been circumvented, nobody is encrypted

  Thanks for your help!

  Sylvain,

  Let me explain again:

  IP nat inside source list 10 interface Dialer1 overload

  overload of IP nat inside source list 110 interface Dialer1

  Here you are from two ACL, but they are the same with the difference, that NAT 10 110 also but WITHOUT user VPN and everything inside. Problem is that 10 matches first, if the connection will not work. You can disable entry NAT with 10 110 because that will also:

  no nat ip inside the source list 10 interface Dialer1 overload

  That should be enough.

  Michael

  Please note all useful posts

• I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

  I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

  The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

  Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

• Variation of thermocouples (+ - 2 ° C) and are under the same conditions

  Hi, my English is not the best but I trust in your intuition and intelligence capacity.

  Actually Im connecting many thermocouples (type J) in a DAQ 9213. I managed to take all measures (7 thermocouples) and also the thermocouples are calibrated. My problem is that the 3 thermocuples give me one 20 ° c (60F) and the other 4 give me 22 ° c = 71.6 ° F, and all the thermocouples are under the same environmental conditions.  The easy solution is to put an offset and compensate for the error but it is not a good solution.

  Can someone tell me what is happening? I think it's wiring problem maybe the COM, but I've referenced the negative signal (low signal) to the COM, also tried not to referencing the negative signals to the commune, but the result is worse because the signals are going crazy.

  Please help me, please!

  Hi Jesus Hernandez

  Also remember that the thermocouples have a positive and a negative side, so if you plug wrong temperature will be different and it will decrease rather than increase when something warmer so close.

  Best regards

  Julio Mena

• 2 contacts save under the same name on the Droid? Help!

  as I was text later I learned I was texting the wrong person... Laughing out loud

  and then I looked under the name of contacts and there were 2 numbers under the same name

  [the two names are different Alex and a Sasha this one Liz and Eliza] and when

  I change them it shows me 2 different contacts under a different name of phone numbers are completely different

  but the area code. I manually added my contacts from my droid all of them and I'm sure I don't have anything wrong

  I need help quickly, thanks!

  stussykrew,

  You can go to the contact details joined and hit Menu > Edit Contact > Menu > separate. This will take the coordinates and split it into two different contacts.

• Using PC and Mac under the same belonging to the creative cloud

  I use a PC and a Mac interchangeably at different locations. Under the same membership in the creative cloud, the software can be downloaded to a PC and a Mac? Also, graphics files created using a PC to update using a mac and vice versa? Thank you.

  Yes and Yes.

  You can install on both using the cc desktop application, https://creative.adobe.com/products/creative-cloud

• two signatories under the same email address

  How I could distinguish two different signatories under the same email address?

  Hello Alejandrae4010574,

  Once you provide the same e-mail address twice to the field, and then in the preview page, you can click first on the role of Participant to choose the top left and select 'E-Sign by signatory' and 'E-Sign by sign (1). In this way, they stand out.

  -Usman

• Subscribe to CC - I just bought a new laptop can install my CC on the new laptop under the same registration/subscription?

  I agree with creative cloud & I just bought a new laptop can install my CC on the new laptop under the same registration/subscription?

  Hi John,.

  no luck with above. Disabled on my old computer, but getting only free trial option when I connect to my account on the new computer?

• Why can't save a form under the same filename with multiple signatures

  I have a form requires it several signature but after the first signature is placed and the form is saved (the document of locking is not enabled) when the form is opened again and the next signature is added now cannot save under the same name form. Why?

  What exactly is the error message?

  It is possible that you are in a folder that is restricted by Adobe or the form is opened by another application as a "Preview" of your file manager mode.

• If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

  If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

  You can activate the product on two computers, if are not the product on a computer before the uninstall, it is always better to disable the CC from this computer.

  To turn off

  launch no matter what CC products and click Help > log out.

• Two quiz under the same program

  Hi guys...

  Is it possible to have 2 quizzes in captivate under the same program? For example, the user can select the beginners or advanced test, and of course, it would be necessary result two slides, one for each quiz.

  Concerning

  Very well, it will be less cumbersome to have to create your own Question slides.

  Please, in the interest of other readers, if we answer your question, could mark you "response"?

  Lilybiri

• Site to site VPN tunnel - cannot ping the second interface of the firewall peer inside2

  I have two ASA 5505 firewall each with a basic license: FWa and FWb. currently there is a VPN tunnel between them work. I added a second (inside2) interface to the firewall, FWb, but I can't ping firewall FWa, so that I can ping the inside interface of FWa.

  I can ping the FWb inside interface 192.168.20.1 from the FWa inside 172.16.1.1 interface, but I can not ping to the 10.52.100.10 of the FWa FWb inside2 interface. I can not ping the gateway host FWa 10.52.100.1.

  I show the essential configuration of two firewalls as well as the debug icmp output on the two firewalls that I ping the internal interfaces and of FWa FWb inside2.
  =========================================================

  Here is a skeleton of the FWa configuration:

  name 172.16.1.0 network-inside
  name 192.168.20.0 HprCnc Thesys
  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name S.S.S.S outside-interface

  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  Description Connection to 777 VLAN to work around static Comast external Modem and IP address.
  nameif outside
  security-level 0
  outside interface IP address 255.255.255.240

  the DM_INLINE_NETWORK_5 object-group network
  network-object HprCnc Thesys 255.255.255.0
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  network-object HprCnc Thesys 255.255.255.0
  ring53-network 255.255.255.0 network-object

  outside-interface of the access-list extended permitted Outside_5_cryptomap ip host object-group DM_INLINE_NETWORK_3
  inside_nat_outbound list extended access allowed inside-network ip, 255.255.255.0 DM_INLINE_NETWORK_5 object-group
  permit access list extended ip host 173.162.149.72 Outside_nat0_outbound aus_asx_uat 255.255.255.0

  NAT (inside) 0 access-list sheep
  NAT (inside) 101-list of access inside_nat_outbound
  NAT (inside) 101 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access Outside_nat0_outbound

  card crypto VPN 5 corresponds to the address Outside_5_cryptomap
  card crypto VPN 5 set pfs Group1
  VPN 5 set peer D.D.D.D crypto card
  VPN 5 value transform-set VPN crypto card
  tunnel-group D.D.D.D type ipsec-l2l
  IPSec-attributes tunnel-Group D.D.D.D
  pre-shared key *.

  =========================================================

  FWb:

  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name 10.51.100.0 ring51-network
  name 10.54.100.0 ring54-network

  interface Vlan1
  nameif inside
  security-level 100
  address 192.168.20.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP D.D.D.D 255.255.255.240
  !
  interface Vlan52
  prior to interface Vlan1
  nameif inside2
  security-level 100
  IP 10.52.100.10 255.255.255.0

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_2 object-group network
  ring52-network 255.255.255.0 network-object
  object-network 192.168.20.0 255.255.255.0
  ring53-network 255.255.255.0 network-object

  inside_nat0_outbound to access extended list ip 192.168.20.0 allow 255.255.255.0 host S.S.S.S
  inside2_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_3 S.S.S.S ip host

  outside_1_cryptomap list extended access allowed object-group DM_INLINE_NETWORK_2 S.S.S.S ip host

  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside2_nat0_outbound (inside2) NAT 0 access list
  NAT (inside2) 1 0.0.0.0 0.0.0.0

  Route inside2 network ring51 255.255.255.0 10.52.100.1 1
  Route inside2 network ring53 255.255.255.0 10.52.100.1 1
  Route inside2 network ring54 255.255.255.0 10.52.100.1 1

  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs Group1
  outside_map game 1 card crypto peer S.S.S.S
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside

  tunnel-group S.S.S.S type ipsec-l2l
  IPSec-attributes tunnel-group S.S.S.S
  pre-shared key *.

  =========================================================================
  I'm Tournai on icmp trace debugging on both firewalls and could see the traffic arriving at the inside2 interface, but never return to FWa.

  Ping Successul FWa inside the interface on FWb

  FWa # ping 192.168.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.1, time-out is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.1 ID = 32068 seq = 23510 len = 72
  ! ICMP echo reply to 192.168.20.1 in outside-interface ID = 32068 seq = 23510 len = 72
  ....

  FWb #.
  Echo ICMP of S.S.S.S to 192.168.20.1 ID request = 32068 seq = 23510 len = 72
  ICMP echo reply 192.168.20.1 S.S.S.S ID = 32068 seq = 23510 len = 72
  ==============================================================================
  Successful ping of Fwa on a host connected to the inside interface on FWb

  FWa # ping 192.168.20.15
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.15, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ! ICMP echo reply to 192.168.20.15 in outside-interface ID = seq 50862 = 18608 len = 72
  ...

  FWb #.
  Inside outside:S.S.S.S ICMP echo request: 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ICMP echo reply to Interior: 192.168.20.15 outside:S.S.S.S ID = seq 50862 = 18608 len = 72

  ===========================
  Unsuccessful ping of FWa to inside2 on FWb interface

  FWa # ping 10.52.100.10
  Send 5, echoes ICMP 100 bytes to 10.52.100.10, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ? Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ...

  FWb #.
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  ....

  ==================================================================================

  Unsuccessful ping of Fwa to a host of related UI inside2 on FWb

  FWa # ping 10.52.100.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.52.100.1, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.1 ID = 11842 seq = 15799 len = 72

  FWb #.
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72

  =======================

  Thank you

  Hi odelaporte2,

  Is very probably the "access management" command is not applied in the second inside, only inside primary (see the race management) which will confirm.

  This command can be applied to an interface at a time, for example, if the law is now applied to the inside, it can not be applied to the inside2 at the same time.

  It may be useful

  -Randy-

• Use the client VPN tunnel to cross the LAN-to-LAN tunnel

  I have been troubleshooting an issue and cannot cross an obstacle. The ASA is running ASA running 1,0000 code 24. I am using a client VPN tunnel to connect to the ASA. The ASA has already a LAN-to-LAN tunnel, set up and operating and I need the VPN client to access the remote site over the LAN-to-LAN tunnel.

  The internal IP address of the local part is 192.168.0.0/24 and the IP address of the Remote LAN-to-LAN tunnel is 172.20.1.0/24. The clients are distributed 192.168.200.0/24 IPs. I have attached the relevant configuration for the SAA.

  When the VPN client on the network, I can access resources on the ASA network internal. On the internal network of the SAA, users can access resources through the LAN-to-LAN tunnel. Client VPN cannot access resources on the LAN-to-LAN tunnel. For the latter, there are no hits on the C-TEST access list.

  Thank you for your help.

  try adding...

  permit same-security-traffic intra-interface

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_guide_chapter09186a00806370f2.html#wp1042114

• Different profiles are not open at the same time

  Due to a change of OS, I restored my Firefox profile (let's call it Profile1) using FEBE.
  I then created a second (Profil2) profile using Profile Manager.
  I created two shortcuts with different targets using the switch followed by the name of profile-p
  Now when I want to open two profiles, the second open is always the same as the first.
  So, if there open P1 and try to open the P2 (with the correct shortcut), P1 is open a second time, and if I start with P2 and try to open P1, P2 is open again

  See also:

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• two user profiles on vista will share the same applications on hard drive

  my granddaughter has created two user profiles on vista with variations of his name.  can copy icons above his profile from first to second?

  Hello

  Yes, it is possible to share the same applications on the hard drive by using two or more different user accounts in Windows Vista.

  For more information see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-understanding-user-accounts