Profiles of the host cannot create, license error.
I tried to right click on a host, or just create a new profile and select a host and I get the same rror.
License not available to perform the operation.
The Vsphere 4 enterprise license for host XXXXX does not include profiles of the host. Update the license.
Then it is said in the recent tasks: license not available to perform the operation?
I thought that the enterprise license came with host profiles? I didn't liked company was necessary.
You must have Enterprise more than license for the host profiles
http://KB.VMware.com/kb/1010579
Tags: VMware
Similar Questions
-
Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.
"An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »
Nope, that is not the case, I have disabled this service and now it works fine!
He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities. ! Norton is the note and fix it for the next update in the coming days...I have
-
The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.
Hello everyone
Here's the situation...
I have:
vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.
vCenter Server running on a virtual Windows Server 2012 machine.
Task: Transfer virtual vCenter to a physical machine.
I have install the physical machine with Windows server 2012.
Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)
VSA installed Manager (VSA Cluster 5.5)
When go to VSA Manager I am introduced to the following screen...
Recover DOES NOT work!
Full move operation DOES NOT work!
It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...
Move the cluster host
VSA HA Cluster
The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.
Could someone please help?
Thanks to you all! This problem has been SOLVED as follows...
- VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
- Open the file "dev.properties" with Notepad
- Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
- Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'
After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!
Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.
Done everything! :-)
-
email problem - "mail from the host cannot be found.
Problem title: original email.
Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.
The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.Gary van, Microsoft MVP (Mail)------------------------------------------------------"Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.Gary van, Microsoft MVP (Mail)
-
How to disable the device Alias in the profile of the host
Hi all
Could someone tell me how this is acutally done, documentation VMwares seems to go in the circle on the subject:
VMware KB: Remediation of host profile fails with an error device alias
Apparently if you have guests who are not identical, but you still want to use the host profiles to configure items on a new host you can disable the device alias but they never say how. The closest thing is to change the profile of the host and remove the sub profiles do not require you, I found, but it does not work.
Any help with this would be greatly affect.
Thanks again,
Thought that it
Just wrap everyone is facing it:
Simply remove the Alias Configuration of device in the profile of the host and this error will disappear. Yet only once if your hosts are not exactly the same.
-
If I install ESXi 5.1 on a new host. Can I ask my host profile that was created using ESX 4 Host.
Please suggest...
No you can't. If you went to a former host to the version 5.1 which do not have the host applied profile, you can create a new profile of the host of this host.
Basically, the profile of the host's specific version for major versions 4.0, 4.1, 5.0, 5.1. Even if you manage to apply an older profile for a new host things might break everything.
An example: how would host ESXi 5.1 know service console ports? He only knows vmkernel ports.
-
ESXI host "not in compliance" with the profile of the host
I have a host ESXI "not in compliance" with the profile of the host cluster. Attached screenshot shows TSM, TSM - SSH message. I've seen it before and fixed by stopping local and SSH support. This time however, the message does not disappear, even when local and remote technical support. I stopped the services and value manual. Any suggestions?
Have you tried to check compliance again? As I got errors like that, they went all first I checked compliance again manually...
-
Get the dreaded cannot create the required file: blah blah blah in lightroom problem
Get the dreaded cannot create the required folder: / Users/My Name/Library/Application Support/Adobe/Lightroom/develop Presets. issue. I tried the suggestions on this forum without result
Hi eqracer,
Could you please provide read and write permissions to the Adobe folder for your account and the Admin account.
You must provide the permissions in the following folder: / Users/My Name/Library/Application Support/Adobe /.
Kind regards
Tanuj
-
See the profile of the host Application
I just want to check that vCenter 5.1 (b) Auto deploy does not apply the profile of the host, he attaches it only. I understand that IP address entry/configuration is necessary when the profile of the host application, but I was wondering if it was possible to automate even that. I can't think how that would be accomplished but thought that I would check to see if anyone had discovered some creative automation.
As long as the profiles of the host requires any input it will not apply and ESXi will remain in maintenance mode.
Here's what you need: http://blogs.vmware.com/vsphere/2011/09/sample-scripts-for-automating-auto-deploy.html. I use the ad - update.ps1 a script pre fill the host profiles answer file and it really works.
MAC addresses will be automatically generated if it is not specified.
-ep4p
-
the writer cannot create a backup error 0x800423F3
I can't create a backup. I use IE8 on Vista Home premium. After several minutes, I get an error.
Backup failed. A snapshot could not be created. The writer experienced a temporary error if the backup process is retried the error does not recur. 0x800423F3. I tried to stop WMI, but this does not prevent the same mistake from happening.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?
You can try the steps suggested by Umesh P in the following link:
-
user profile srevice has no logon. User profile cannot be loaded. only have a profile on the pc, windows vista. I tried f8 @ start upward and just takes me to the photo of profile and the password box. ???
* original title - user profile service does not logon, user profile cannot be loaded: only have a user profile on my f8 computor.tried @ start up and takes me just for the photo box and user password? *
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
applying profiles from the host to another ESX version
Hello
If I create a host on an ESXi 4.1.0 host profile and try to apply it to a 4.1 ESX host going to work?
No, but shoud work the other way around.
of http://www.vmware.com/files/pdf/techpaper/VMW-Host-Profiles-Tech-Overview.pdf
Created from a reference host ESX VMware host profiles can be applied to the ESX and ESXi time hosts. An ESXi host profile may
only be applied to an ESXi host. ...André
-
I wonder if the host profiles can be used to create user accounts in the ESX Server service console?
Thank you
Hello
No problem. Here is your answer. Glad it helps!
Best regards
Edward L. Haletky
Host communities, VMware vExpert,
Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition (c to mid-January)
Podcast: the Podcast for security virtualization of resources: the virtual virtualization library
-
set executeInBackground = true on iOS cannot create property error
I use Flash Builder 4.7, created a Flex Mobile project.
When my application are disabled, he must send an HTTP POSt request to my server. It takes a few milliseconds to send and on Android, it works fine. However, on iOS, as the application is paused, the request is not sent until I activate the application again.
I looked online and tried this solution:
adding the line
NativeApplication.nativeApplication.executeInBackground = true;
Depending on the House, or just before sending the application throws an exception:
ReferenceError: Error #1056: cannot create flash.desktop.NativeApplication property executeInBackground.
views: BnpSampleHomeView$ cinit)
Global $init)
at BnpSample() [C:\eclipse\projects\BnpSample\src\BnpSample.mxml:3]
to _BnpSample_mx_managers_SystemManager / create () [_BnpSample_mx_managers_SystemManager.as:51]
at mx.managers.systemClasses::ChildManager/initializeTopLevelWindow() [E:\dev\4.y\frameworks\ projects\framework\src\mx\managers\systemClasses\ChildManager.as:311]
at mx.managers::SystemManager/initializeTopLevelWindow() [E:\dev\4.y\frameworks\projects\fram ework\src\mx\managers\SystemManager.as:3057]
to mx.managers::SystemManager / http://www.Adobe.com/2006/Flex/MX/internal:kickOff ([E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2843])
to mx.managers::SystemManager / http://www.Adobe.com/2006/Flex/MX/internal:preloader_completeHandler ([E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2723])
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler() [E:\dev\4.y\frameworks\projects\framework\src\mx\p reloaders\Preloader.as:542]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
Help is apprecaited
Some parts of this section may be useful:
-
Outlook Express POP3 host cannot be found. error no 0x800cccod.
original title: ox800cccod error CodeWhen I try and send a Message through Outlook Express, I get this:
The host 'POP3' could not be found, check the name of the server, account 'POP3', Server POP3, protocol POP3, Port 110, 11001 socket error, error no 0x800cccod.Someone help me!,When I try and send a Message through Outlook Express, I get this:
The host 'POP3' could not be found, check the name of the server, account 'POP3', Server POP3, protocol POP3, Port 110, 11001 socket error, error no 0x800cccod.- POP3 is not a hostname.
- POP3 is not an account name.
- POP3 is not a server name.
Setting up email in Outlook Express servers:
http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspxYou need get account from your ISP/Mail Server settings.
If you tell us who is your server (which is after the @ in your address) we may be able to point you in the right direction.
Maybe you are looking for
-
IX2 - dl actions do not appear on start up
I have an Iomega IX2 - DL, which is only a few months old. Lately, when I turn it on, all my actions do not see the and I'm unable to access my data. If I leave it for about 5-10 minutes, they finally appear to give me access to my data. Hoping someo
-
I want to upgrade my pc, I just want that to happen to my programs installed after the upgrade is done?
-
ProBook 6550 b: driver missing for 'Base system device' x 2 after Windows 7 install on laptop
Upgrade to SSD drive and a fresh install of Windows Professional 64 bit, I've got two conflicts in referring to the 'base system device' Device Manager Both devices are PCI Slot 2 (PCI bus 67 0 device function 1) Both devices enter the following code
-
Help! I'm about to commit the homicide of the computer! I have been troubleshooting for weeks and am now bald from ripping my hair! Computer: Dell Inspiron 537 s Slim Desktop w / Pentium Dual - Core CPU E5200 @250 GHz Network card: Realtek PCIe FE F
-
Transfer Contacts blackBerry Z10
Can someone explain that to me transfer my contacts from my samsung for blackberry z10. Thank you very much