ESXI host "not in compliance" with the profile of the host

Similar Questions

• HP graphic calculator first: first RPN - battery display of items not in compliance with the User Guide

  In the HP User Guide first, in the section on page 48 RPN, the image shows the battery watch algebraic views of right which was calculated on the left side of the line battery, with responses on the side of each line in the stack.  When I do the same calculations, I only get responses from the right side.

  Is there a parameter that represents the lines of battery as in the user's Guide?  I can't find it if it's there.

  Thank you

  Nick

  The guide I think you are referring is the guide of July 2013.  These pictures no longer exist in new versions of the user guide.

  I haven't met a setting that causes the behavior used in these pictures.

• Change the host for a virtual machine on a cluster and the host is not in accordance with the attached profile

  Hi all

  I have 02 questions.

  1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.

  But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.

  How to do this?

  2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message

  "Configuration problems: host is not in accordance with the attached profile.

  I suspect that this is the case for my question 1?

  Thank you very much

  Hello

  I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >

  Under Data Mover

  HardwareAcceleratedInit

  HardwareAcceleratedMove
  

  
  

  Under VMFS3

  HardwareAcceleratedLocking

  Compliance status is returned to the green.

  Thanks for the advice guys!

  Thank you

• I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  Hi forrestfan,

  If you use the Windows platform, please try the steps below.

  1 reset the Internet Explorer settings to the default value.

  Reference: change or reset the settings of Internet Explorer - Windows help

  2 reset the Windows hosts file.

  Reference: https://support.microsoft.com/en-us/kb/972034

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I can back into my email account. Is there a way to permanently solve this problem? Thank you.

  Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.com/kb/cannot+log+in+to+websites

• The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to resolve this ongoing problem with Apple's iTunes... help me solve

  The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry

  Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

  Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
  I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

  Dave

  Hello
  The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

  Mobile Mouse 6000 wireless

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

  You can also get in touch with Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie