PROFINET for cdaq controllers

Similar Questions

• Nodes cDAQ controllers hardware front panel

  cDAQ controllers have a display port: so the panels before lapping screws can be displayed!

  Well, we know that LV RT cannot manage the property nodes réaccouplés façade elements (especially because the screws that typically run on an RT target do not have an active façade at run time).

  Is this always true with controllers cDAQ providing a display port? (for example, 9132)

  If you want to act on the Panel controls front of a VI running on this kind of material (for example, disabling and grizzled CTL,...), it'll work?

  What OS should I chosse to do?

  Hello

  You're right, previously, it was not possible to access the properties of the façade on RT systems. Our new generation of equipment based on LInux RT integrates a HMI "emulator" that allows you to interact with your façade.

  This first link provides info on the new DAQ Compact controllers generics:

  http://www.NI.com/white-paper/14029/en/

  This one shows what operating system is supported with which harware:

  http://digital.NI.com/public.nsf/allkb/35F1FD98520D6E0E8625783A005AF557

  And the last of them explain how to create a GUI for your system:

  http://www.NI.com/white-paper/12602/en/

  Kind regards
  Karine

• RAM Standard PCI controllers, no drivers are installed for this controllers (19)

  I have Windows XP Pro SP3 IE 8 drive C: D: and G: My Book

  Under devices - devices of the System Manager, looking I found what I wrote in the title.

  Question: is it normal or if each need a driver? I have to check each of them, supposedly 'works correctly."

  Same problem on:

  NVIDIAn PCI power management properties

  Numeric Data Processor

  Direct memory access controller

  Parent resources 3 of them.

  I didn't make any change in the computer.

  Help will be appreciated.

  There are no drivers for the controllers... you can always search google ;)

• Power over Ethernet for cDAQ 913 x (Windows)

  Hi all

  We believe using a cDAQ system to capture and process the images of a GigE camera alongside a few other data acquisition. The camera, we have in mind supports power over ethernet (PoE) we could eliminate the need for an additional power supply of the bulky.

  So, can I use this device with built-in second ethernet port of, say, a cDAQ-9136 (Windows)? I have searched the manual but have not yet found anything...

  Hello pktl2k,

  at the moment our controller do not support the PoE. You can use the Poe injector to power the camera

  Using Power over Ethernet with the hardware OR

• Miss C Quick Module for cDAQ-9137

  Hi all

  I'm trying to implement a cDAQ-9137 for continuous data capture, without monitoring and logging for a long period of time (2 weeks +). I just created a new empty Labview project and added my cDAQ as target. However, when I right click on my cDAQ and go to 'Add targets and devices', the guest of the C module is missing, the only option is ' Chassis MXIe-RIO ". I was trying to get out of this tutorial: http://www.ni.com/tutorial/52027/en/

  I have attached a screenshot of the measurement and Automation Explorer and the guest of labview. In particular, I am trying to add the 9232 OR "cDAQ1Mod3." It is installed, and I can run a panel of test with him.

  I'm a lab intern, and I have not much experience with labview, so any help would be greatly appreciated.

  Hi AbeG,

  Thank you for fixing the screenshots of your project and MAX OR this post on the forum! Unfortunately, I don't have a CompactDAQ real-time directly available to test for the moment, but I'm fairly certain that you should be able to read I/O without adding explicitly in the Modules of the series C with your cDAQ. The reason why you must explicitly add the CompactRIO modules targets is because modules runs in the interface of the Interface of scanning or FPGA. With a goal of RT CompactDAQ, there is no interface FPGA option; instead your controller will read I/O to your Modules in the series C directly.

  If there is not an option for 'Module of the C series' in the submenu again when right clicking the target RT CompactDAQ, then I am inclined to believe that you should be able to target by device name thereafter. I want to say is that if you create a VI using our DAQmx API below your target RT CompactDAQ, you should be able select "CDaq1Mod3" as a material target for this task. Please check that is a DAQ Assistant or create a task DAQmx simple acceleration (or whatever it is you measure) under the lens of RT CompactDAQ. Thank you!

• Driver for USB controllers

  I recently had to replace the hard drive in my Pavilion dv6. Everything went perfectly. However, during the two weeks, my USB ports have stopped working one by one.

  In Device Manager, there are 4 devices listed under 'Other devices': 2 inputs for USB PCI Device and SM Bus controller. I did my best to find the drivers that seem to be missing, but I have been unable to do.

  Hardware for the PCI device ID:

  PCI\VEN_10EC & DEV_5209 & SUBSYS_1805103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1805103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  For SM Bus controller hardware ID:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358B103C & REV_13
  PCI\VEN_1022 & DEV_780B & SUBSYS_358B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  For USB controller hardware ID:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Of course, I tried to restart, and then uninstall these devices and reboot (several times). I also tried to install some drivers who seemed to have success with other users. Nothing has worked so far.

  Any suggestion or idea would be greatly appreciated.

  See you soon,.

  Carson

  Hello:

  Download and install the amd chipset drivers and restart.  You want the first file listed in the page.

  Who should install the smbus and usb controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  The other driver, you need for the PCI device is the driver card reader Realtek driver page and support of your laptop.

• How to disable snapshots for domain controllers in ESXi 5? Or other best practices?

  Dear all,

  I need some aspects of assistance to the deactivation of snapshots for 2 VMS in my HA cluster running Active Directory to Windows 2008 R2.

  I read that best practices for virtual machines running that active Directory is never for them to snapshot.

  I'm worried about auto created by the systems periodically snapshots and the problem arises if a snapshot is to be reinstated by mistake.

  So, what are the best practices for virtual machines running as domain controllers? To deactivate the snapshot function or other recommended methods?

  Please kindly share. Thank you.

  Rgds

  Leslie

  leschua75 wrote:

  .

  I'm worried about auto created by the systems periodically snapshots and the problem arises if a snapshot is to be reinstated by mistake.

  VMware has no system automatically taking portraits.

  Snapshots exist either because you made them manually, an application backup created. In this case, talk with your backup vendor.

• GAMES FOR WINDOWS__ CONTROLLERS

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I installed a Xbox 360 controller for windows, can I play hitman 2 silent assassin with her?

  I have problems, it does not work... Thank you!!!

  I HAVE A SAMSUNG R780 NOTEBOOK WINDOWS 7

  • you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  ---------------------

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• Pavilion 15 ab226ne: drivers for some controllers

  I use a hp Pavilion ab226ne, I installed windows 7 64 bit and need the driver for: network controller, video controller, control and 3d usb, ethernet contorller, thanks in advance.

  ayoubc wrote:

  I use a hp Pavilion ab226ne, I installed windows 7 64 bit and need the driver for: network controller, video controller, control and 3d usb, ethernet contorller, thanks in advance.

  Have you looked here?

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8903236#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Should what version of the software for the controllers of 4400 and 5500 I use?

  I saw a 7.0 and I think that the 7.1146 (is that an early release?) I have not upgraded in a year and would like to now since school is out. I also use the WCS system as well and did not know if there was an upgrade for that since last year.

  I would go for the last 7.0.X.

• The SD cards are recommended to be used with the cDAQ 9133?

  Embedded controllers that are the recommended type and size recommended SD cards to be used with the cDAQ Win7 9132 and 9133?

  Hardware specifications for two controllers, you will find that the SD and SDHC cards up to 32 GB are supported.  There is no model or brand recommended, but there are 16 GB (783658 - 01) and 32 GB (783659-01) maps available for purchase through the OR.  You can find those listed in the accessories section available hardware user manual.  See the fees section of the controller product page for more details.

  EDIT: Linked to the UNIFIED and product Messaging page

• Re: Drivers Win XP for Satellite L300-PSLB8A - 0d 5004

  Hello...

  Recently I did something stupid... to install windows xp on a windows vista computer...

  Anyway, Ive a messed up but now on this windows xp Toshiba Satellite L300-PSLB8A - 5004 0d I'm missing some drivers... I was wondering if someone could give me the correct driver links so I could download them please...

  the following drivers are missing:

  _ * ethernet controller: * _ PCI\VEN_10EC & DEV_8136 & SUBSYS_FF661179 & REV_02\4 & 38F101EE & 0 & 00E0
  _ * ethernet controller: * _ PCI\VEN_168C & DEV_001C & SUBSYS_7128144F & REV_01\4 & 318470AD & 0 & 00E1
  _ * device on high definition audio bus modem: * HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUB _ SYS_11790001 & REV_1002\4 & 1760F043 & 0 & 0101
  _ * Video controller: * _ PCI VEN_8086 & DEV_2A43 & SUBSYS_FF671179 & REV_07\3 & B1BFB68 & 0 & 11
  _ * Video controller (VGA compatible): * _ PCI VEN_8086 & DEV_2A43 & SUBSYS_FF671179 & REV_07\3 & B1BFB68 & 0 & 10

  When I go into run and type msinfo32 then expand the items and check problems for ethernet controllers it says that this device is not configured correctly and for the res, it tells the drivers for this device are not installed. There is also 1 * not AVAILABLE * uninstalled car door a PNP ID number if someone wants.

  Please can anyone help... I urgently need these drivers...

  This will help you to identify the device and to get good drivers:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  But at first glance, it seems that you have need of a driver for the graphics card, modem, LAN and WLan driver.

• Need drivers of Windows XP Home for my Satellite P200 - 14H

  Hello!

  I bought the P200 - 14H and want to downgrade from Vista to XP! Of course, there are no drivers on the Toshiba download website (OK, ago but nothing relevant) and then I should search for drivers of origin. But I found no drivers for:

  PCI memory controller
  ClassGUID: {4D36E97E-E325-11CE-BFC1-08002BE10318}
  CompatibleIDs: PCI VEN_8086 & DEV_444E & REV_01
  ConfigFlags: 64
  DeviceDesc: PCI memory controller
  HardwareID: PCI VEN_8086 & DEV_444E & SUBSYS_444E8086 & REV_01
  LocationInformation: Bus PCI 6, device 0, function 0
  UINumber: 10

  AND

  SM Bus controller
  Class: unknown
  ClassGUID: {4D36E97E-E325-11CE-BFC1-08002BE10318}
  CompatibleIDs: PCI VEN_8086 & DEV_283E & REV_03
  ConfigFlags: 64
  DeviceDesc: SM Bus controller
  HardwareID: PCI VEN_8086 & DEV_283E & SUBSYS_FF001179 & REV_03
  LocationInformation: Bus PCI 0, device 31, function 3

  Then, y at - it an explanation for these controllers and is there any drivers for it? !!!
  And of course, what is?

  Thank you!!!

  > I bought P200 - 14H and want to downgrade from Vista to XP! Of course, there are no drivers on the Toshiba download website (OK, ago but nothing relevant)...

  What do you mean not relevant? I think that you are the first person who thinks that drivers are not relevant. Be so kind and explain what you mean exactly.

  in any case: have you installed the drivers all listed according to the order of installation of document "guidelines for facilities?

• cDAQ 9171 verification of the calibration

  We try to evaluate the verification requirements of a single 9171 locations USB cDAQ chassis calibration.

  We use a cDAQ 9171 to take some simple +/-5 volts using an analog input module 9205 readings.  The 9205 has a specific calibration and verification manual for voltage measurements, no confusion there at the moment.

  This article has a general verification for cDAQ chassis process that focuses on a digital input module.  Is this something that will affect the analog voltage signals, we'll pick up?  Is there a way to check the calibration using the module, we already have?  Or is the calibration process 9205 alone that relate to our simple tension collection installation?

  The calibration of the frame is reserved for the digital I/o. This is why I do not think that this will affect the readout. Calibration of the module must be the only one that applies to analogue tasks.