How to disable snapshots for domain controllers in ESXi 5? Or other best practices?

Similar Questions

• How to disable snapshots for a vmdk?

  I thought that I had asked this before and have the feeling that it is possible, but do not find the information now.

  I want to share a vmdk that I use for DATA of the virtual machines. The virtual machine that contains the vmdk DATA does not use / have snapshots, but I want to use snapshots in other virtual machines. I have create a new hard drive in each virtual machine, choose the vmdk existing DATA and select "share this virtual disk with the virtual machine that created it." However, when a snapshot is created in the other VM, it also creates a snapshot of the DATA vmdk. The problem is that if something is written on the vmdk DATABASE, then all the VM who have snapshots will report the DATA as being damaged vmdk.

  To work around this problem, I want to disable snapshots for the vmdk from DATA, but leave it turned on for all the other vmdk. Is there a setting to do this?

  OxkAMam wrote:

  How do you define a disc to independent mode?

  Add the following parameters to the configuration of the Virtual Machine's .vmx file, then that is closing, closed not suspended and VMware Fusion.

  The syntax is as follows however uses the one appropriate for your configuration.

  ide0:0.redo = ""
  ide0:0.mode = "independent-persistent"
  
  Or
  
  scsi0:0.redo = ""
  scsi0:0.mode = "independent-persistent"
  

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI?

  Hello

  How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI? I have watched with in the Administration of the system GUI pages for example Sessions and can't find how to turn it off.

  Y at - it a CLI command I can run?

  Thank you

  Stuart.

  Try to update to patch 5.3.0.40.7

  Resolved questions in ACS 5.3.0.40.7 rollup

  CSCub40498 : the password in ACS 5.3 field has enabled auto operation.

• How to disable NICs for Windows XP?

  Dear Madam:

  I have a desktop of Microsoft Windows XP Home Edition Version 2002 Service Pack 3.

  How to disable the network adapters in Windows XP?

  It's a very good idea to stop Windows XP to connect to Internet automatically due to the end of support for Windows XP?

  Please reply back soon.

  Thank you.

  First of all you could just pull the Ethernet cable if this is a wired adapter. Or remove details of the wireless network, if this is a wireless adapter.

  Some adapters may be disabled via the BIOS setup, in which case they won't be even visible by Windows as the available material. These adapters adapters "embarked", i.e. the Ethernet cable plugs into a socket on the motherboard I/o Panel not the socket on a separate component card snap.

  Expansion card can be deleted without problem after power off, unplug the power cord and anti-static precautions.

  Alternatively, you can...

  • Click Start
  • Click on run
  • Type ncpa.cpl, and then press ENTER.

  In the window that results, you can click with the right button on Ethernet adapters (wired or wireless) and then click on disable.

  Tricky

• How to disable authentication for telnet?

  I want to know how to disable the authentication of user Telnet access. Whenever we enter the command (telnet ip address) in the command prompt, it asks for authentication, I want to turn it off. For example:-If someone wants to access my PC after entering the command (telnet IP address) it should not ask for authentication. Please help me how to do this.

  Thank you

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Computer configuration virtual for SRM - files from memory Swap file/Virtual - best practice replication?

  Hello, I am very new to the model DR VMWare and have a few persistent questinos.

  What is the recommended best practice re: virtual computers invited windows and virtual memory files.  I think it would be unnecessary to replicate these changing data on the DR site.  I have several virtual machines with 6-8gig memory and I'm just wondering how can I isolate the ESX memory swap files and virtual memory in Windows feedback, so they get not replicated on the Dr site as often as changing os/data.  If it's even necessary to replicate.

  We use vspere vcenter 4.1 related modes, RS 4.1 the two on-site Cellera NX4 ReplicatorV2.

  I wonder if I can install the files of pages to be in a condition NOT replicated file system or a file system which is the only value replicates every 24 hours, or once a week.

  My reasoning here is.  Once the file is there, the operating system really cares about the changes in this file and dumps windows virtual memory on a restart, as well as the .vswp file.

  what I mean is built on a virtual disk full and placing the windows file on this virtual disk to Exchange.  This virtual disk could exist in a data store hosted on a celerra file system that does not get repeated as frequently as data/OS file systems.

  or am I completely off base here.

  I think that if you tried to reproduce these files and maintain a sync time minute 10, you would need a ton of bandwidth.

  any suggestions or recommendations or even pointers to Articles/items worth points = D.

  Thanks for your time.

  Given that the configuration is made at the level of the cluster and has no impact on the SRM, replication is not a factor.  Don't forget, not to replicate the LUNS with the swap, just files have a LUN configuration on the side of recovery as well and have this defined cluster Exchange files.  Also, on the virtual machine critical we define reservations memory so the pagefile is not a factor at all.

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

• How to disable authentication for application installation in active directory

  I'm a rookie,

  I am system admin at my company and I've implemented active directory in my company.

  every time an employee application, then ask his user name and password and it's good.

  However, there are some users VIP who doesn't want that. So, how can I disable it only for some users so that they can install applications.

  Please help me.

  I am a new joinee in my company and want to learn a lot of things.

  Please help me to provide the best it services my copmpany.

  All want to help me, then please write to me on

  Kind regards

  Faraz

  Hi Faraz,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see you want to disable authentication to install applications in active directory for some users.
  As the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to disable Notifications for the screen?

  On my computer windows 8, I just get TOO MANY notifications of Skype to the screen, which ruined my gameplay. And that whenever "Ding" someone messages from the group. How can I disable the notification of the screen to slide on my screen?

  To change the settings for notifications:

  Drag from the right edge of the screen, and then tap Settings.
  (If you use a mouse, point to the lower right of the screen, move the mouse to the top, and then click settings.) Press or click Change PC settings, tap or click search and applications and notifications.

  See the notifications of these applications, set the app you want to turn on or off.

• How to disable verification for specific user

  Hi all

  On our setting of database audit db is expanded, and verification information was resident on system tablespace.

  For some reason we allow audit to the specific user.

  VERIFICATION BY TOMMY BY ACCESS;

  CHECK DELETE THE TABLE, INSERT TABLE, SELECT THE TABLE, UPDATE TABLE BY TOMMY BY ACCESS;

  AUDIT EXECUTE ANY PROCEDURE OF TOMMY BY ACCESS;

  He wrote too much information and we want to disable this check for tommy. But we want to do without restarting database because our running System 7/24.

  We allow audit for tommy without rebooting, but we can't turn it off without restarting.

  NOAUDIT ALL BY TOMMY;

  NOAUDIT DELETE THE TABLE, INSERT TABLE, SELECT TABLE, TABLE UPDATE BY TOMMY;

  NOAUDIT PERFORM ANY PROCEDURE OF TOMMY;

  There is no error but it steel writes too much information, please help how we can disable it without reboot?

  2790572 wrote:

  Hi all

  On our setting of database audit db is expanded, and verification information was resident on system tablespace.

  For some reason we allow audit to the specific user.

  VERIFICATION BY TOMMY BY ACCESS;

  CHECK DELETE THE TABLE, INSERT TABLE, SELECT THE TABLE, UPDATE TABLE BY TOMMY BY ACCESS;

  AUDIT EXECUTE ANY PROCEDURE OF TOMMY BY ACCESS;

  He wrote too much information and we want to disable this check for tommy. But we want to do without restarting database because our running System 7/24.

  We allow audit for tommy without rebooting, but we can't turn it off without restarting.

  NOAUDIT ALL BY TOMMY;

  NOAUDIT DELETE THE TABLE, INSERT TABLE, SELECT TABLE, TABLE UPDATE BY TOMMY;

  NOAUDIT PERFORM ANY PROCEDURE OF TOMMY;

  There is no error but it steel writes too much information, please help how we can disable it without reboot?

  The change applies only to new sessions opened by TOMMY.

  So at a minimum all existing sessions belonging to TOMMY need to be terminated.

• How to disable integrated PERC S300 controllers and connect hard drives directly onboard SATA

  Hello

  I bought new servers, two of them came with PERC S300 controllers. When I tried to install Linux (CentOS) on this subject, the system could not see the RAID!

  After some research, I noticed that it is Windows specific (fake RAID)

  I want to disable this controller and connect my hard drives directly to the main card SATA connectors and implement a software RAID under Linux.

  What I need is:

  What cables I need to order for this?

  Thank you

  When I picked my servers and decided on their specifications, this note (red) was not on the site, and I am sure about that because I have not all Windows servers on my network.

  Now that I ordered and received them, I'm looking for a solution.

  I ordered this kit: Dell PowerEdge HDD DATA CABLE KIT DP/N C450M CN-0C450M

  

  I will receive next week. I hope that this will help me get around this annoying problem.

• How to disable mirroring for airplay in IOS 10?

  I would use Airplay the old-fashioned way, where I can use it without mirroring (audio and video playback) - anyone have any ideas?  For example, mirroring works well in all applications (i.e. NFL app).  I can't get the audio to work and not the video.

  Hello chimidon,

  Welcome to Apple Support communities.

  I see that you want to use Airplay the old way of streaming audio and video, where you can use it without mirroring. I use a lot of Airplay on my iPhone. So I know how it is important to ensure that you are able to use it without any problem.

  iOS 10 includes only the mirroring option in the control center. So, sliding up to open the Control Center allows you to mirror of your iPhone at a connected device Airplay. If you want Airplay from a specific application, the app must have the Airplay feature, and you need to activate Airplay from within the application itself. When you open an application, look for it icon to launch the Airplay and then select your Airplay device.

  All the best.

• How to disable check for updates button in Help / about firefox 5.0

  Hi the user shouldn't check updates manually if we want to disable the updates also button control in Help/about.

  Thanks in advance

  You can hide this button with the code to userChrome.css below @namespace.

  • http://KB.mozillazine.org/userChrome.CSS
  • http://KB.mozillazine.org/Editing_configuration

  You can use the ChromEdit Plus extension or elegant for easier access to the customization files.

  • ChromEdit more: http://webdesigns.ms11.net/chromeditp.html

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  #aboutDialog #updateBox { display:none!important; }

  Alternatively, you can choose to lock the pref (s) update related to false if you want to make sure.

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://KB.mozillazine.org/about:config

• How to disable WiFi for Portege R830 + Port Replicator & external keyboard

  Stupid question I know, but it's driving me crazy.

  I have an external keyboard Port duplicator and the attached monitor. The Port Replicator has a wired Ethernet connection to my local network. When I anchor my R830 in Port Replicator, ideally I would like to turn off the wireless adapter, but at least I certainly want the default use of the wired LAN connection not WiFi.

  Currently, it seems just randomly decide to use wired or wireless connection when I anchor.

  So, two part question:

  1. How can I pay the R830 automatically default to an Ethernet cable when I anchor?
  2. How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)

  Thank you very much in advance for your advice.

  > How can I set the R830 automatically default to a wired Ethernet connection when I anchor?
  If the port replicator is connected to the local network and then the laptop would use the LAN connection automatically if you connect the R830.

  > How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)
  Well, in this case, you can use the internal keyboard to turn off the WiFi using Fn + F8

• Tecra M5 - how to disable asking for a fingerprint?

  I have a Tecra M5, who has a problem.
  When I turn on the computer it says a HARD internal disk error and then it request a fingerprint. There is no hard drive installed yet because it is a mobile business that the company has withdrawn the HD how to in this computer so I can't disable the fingerprint?

  I n t need because it will be used as a personal computer and non-commercial. If anyone has any idea to solve this, I'd appreciate it.

  Thank you

  AFAIK fingerprints fingerprints will be required when you want to log in the preinstalled operating system and it is unclear to me that you will be asked to fingerprinting at the BIOS level.

  You can enter the BIOS settings?
  Get the HARD drive and try to install the operating system.