program discount of WPP used on refurbished products?

Similar Questions

• I don't think I should have to pay for the new Windows program. I always have an active product key. What can I do?

  XP came with my laptop. Now I have to start all over again and get a new hard drive. The rescue disc does not work and I can't get a new manufacturer, my computer is too old. I don't think I should pay for a new Windows program. I always have an active product key. I would like to get the program from Microsoft using my current key. What can I do?

  XP came with my laptop. Now I have to start all over again and get a new hard drive. The rescue disc does not work and I can't get a new manufacturer, my computer is too old. I don't think I should pay for a new Windows program. I always have an active product key. I would like to get the program from Microsoft using my current key. What can I do?

  I do not speak for Microsoft. However, I saw many times when working with clients in your situation with regard to the reactivation of windows because of the failure of a component. They are not, however, responsible for providing you with a windows disc that should be provided by your computer manufacturer. However, if I were you, I would ask to borrow a disc of windows of a friend or a neighbour then contact Microsoft for activation, making sure to explain the circumstances surrounding the re-setup.

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• Adobe Creative Cloud bought 28 may 2015. Now how to download all Adobe products? with this purchase do use all adobe products? How to install applications on my desktop?

  Hello

  I bought Adobe Creative Cloud on May 28, 2015. Now how to download all Adobe products? with this purchase do use all adobe products? How to install applications on my deskyop?

  If your subscription is current, the indications are less than

  Your subscription to cloud or serial number to show on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• If I cancel my subscription to creative cloud means that I can't use my adobe products?

  If I cancel my subscription to creative cloud means that I can't use my adobe products?

  That's what rent means... Stop paying for your apartment and you can live is no longer there

  You can always buy CS6 or suites for a fresh (larger) moment of Creative Suite 6 programs

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Windows XP Home edition has crashed - how to return WXP and use with the product key?

  Hello. I bought an Equium L20 last year and after 1 year my windows crashed due to a virus. I want to know how to get a real windows xp OS because the product under my laptop key is always saved for me and is a legitimate product but I can't get windows because it was obviously preinstalled and no CD was given to me with the package.

  How can I get back Windows to use with my product key on my WIN sticker below my laptop.

  Hello

  First of all, it is very strange that recovery CD is not delivered with your laptop. It's hard to believe, but anything is possible. As you know after buying a new product, it is very important to check all orders sent with it and if something is missing, you must call the local as soon as possible and not to wait a year.

  Sorry but this key code belongs to original recovery image and you can't use it with every installation of Windows XP Home edition CD. In your case, there are two options:
  -You can buy the CD of facilities Microsoft original WXP (with the key correctly code) or
  -Contact the partner of service allowed in your country and order the new CD from recovery for your laptop model.

  All that s!

  Bye and good luck!

• I get the message asking me what program I want to use to open the program

  When I'm online and I try to change the programs, such as clicking 'send' or any change of clock, I will get a window with about 6 choices that says: "what program you want to use to open this program" no matter which one I try, I got nowhere. This all started 4 months ago. How can I get rid of this nuisance.

  Thanks, Dan

  Hello

  (1) do you have made no changes before this problem?

  (2) what operating system do you use?

  Method 1:

  Step 1: I suggest you perform a clean boot before run us the fix it.

  Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Cannot open. EXE in Windows 7 or Windows Vista http://support.microsoft.com/kb/2688326 files

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 2:

  Step 1: Run the antivirus in safe mode

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Microsoft Safety Scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the results.

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  The message says:-since first, windows has been activated on this computer, Windows must be reactivated within 3 days.

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Aalst certainly just use the actual activation.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button mini that you cannot read even if someone can help thanks to

  recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button bar mini tasks that you do not know still can anyone help thank s that it is just a program minimized, I used to be able to read the content now, it is not big enough for an icon

  Hello

  You can check this link:

  Description of the Option "the of the Group similar taskbar buttons".

  http://support.Microsoft.com/kb/281629

• When you try to open a program, get the area "Choose the program you want to use to open this file".

  When I try and open a program I get the box "choose the program you want to use to open this file. Also, when I try and access any of my icons in my control panel, I get a message saying 'C:\WINDOWS/system32/rundll32.exe. Aplication not found. "

  Uninstall mywebsearch toolbar, Zynga, my fun cards

  Check these then check fix checked. Narrow browsers

  O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)

  O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)

  O4 - HKLM\... \Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCheck.exe

  O4 - HKLM\... \Run: [HP Software Update] C:\Program HP HP Software Update\HPWuSchd2.exe

  O4 - HKLM\... \Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" - atboottime

  O4 - HKLM\... \Run: [MyWebSearch Plugin] rundll32 C:\PROGRA~1\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL, UPF

  O4 - HKLM\... \Run: [my Web Search Bar scope monitor research] "C:\PROGRA~1\MYWEBS~1\bar\1.bin\m3SrchMn.exe" / m = 2/w/h

  O4 - HKLM\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"

  O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."

  O4 - HKLM\... \Run: C:\PROGRA~1\MYFUNC~2\bar\1.bin\c8brmon.exe [MyFunCardsbarIE Browser Plugin Loader]

  O4 - HKLM\... \Run: [TkBellExe] "C:\program files\real\realplayer\update\realsched.exe" - osboot

  O4 - HKLM\... \Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0-k

  O4 - HKCU\... \Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"

  O4 - HKCU\... \Run: [BitTorrent] "C:\Program Files\BitTorrent\bittorrent.exe".

  O4 - HKCU\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  Then download malwarebytesto day then do a full scan

  You are probably infected by something you downloaded with bittorrent

• Can I get another copy of the installation discs to use with my product key?

  I bought a copy of XP Media Center in 2008. Recently, I tried to install it for the first time and received a message that windows needs to run the files are missing. He installed windows and ran for a few weeks now to start it flashes a blue screen for 1 second and then tries to restart again. Can I get another copy of the installation discs to use with my product key?

  Unfortunately, Windows XP Media Center has been removed and the installation of replacement discs are no longer available.

• Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

  Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

  * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

  Hi LisaPisani,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

   

  Method 1

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2

  If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084