Unable to install the driver for the network printer, the reason according to HP's Service: MSIServer

Similar Questions

• my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

  Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

  Hello

  What brand / model of the computer?

  There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
   
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Windows 7: install a driver for your network card

  I have a Dell inspiron N5050 and I reinstalled windows 7 64 bit using an installation disc, now it does not connect to the internet. There is a red x on the network icon and my wifi never displays. When I troubleshoot, it says "install a driver for your network card.

  Download and run the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  It is one of the very few reliable sources of the pilots.

  Otherwise, I assume that you have already tried to use www.support.dell.com

• HP Pavilion g7-2043sf: Windows could not find a driver for your network card

  Model: HP Pavilion g7-2043sf

  Product number: B1P51EA #ABF

  Today, I did a clean install of Windows 7 on this laptop and I can't connect to internet via wifi. When troubleshooting I get this message:

  Windows could not find a driver for your network card
  Windows does not detect a network card is installed correctly. If you have a network card, drivers for the card cannot be installed correctly.
  Install a driver for your network card
   
  Collection information
  Windows Version: 6.1
  Architecture: amd64
  Time: Thursday, December 24, 2015 12:34:16

  In Control Panel, I found this information:

  Ethernet controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1844103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  Network controller: the drivers for this device are not installed (Code 28)
  Hardware ID
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  I visited this side: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-2000-Notebook-PC-series/5226249/model...

  I need all drivers of network?

  Thank you.

  Hello:

  You need these drivers...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55979.exe

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp58586.exe

• "Receive the error message" Windows cannot find a driver for your network card.

  Original title: unable to connect to the internet. Perhaps driver problems?

  I installed windows 7 on a blank hard drive.

  Everything seems to be fine. When I open solitarie it is said ' Harware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. "
  A mistake is over that I noticed that I can not connect to internet.
  My ethernet cable is fine, he hooked directly to the wireless router. so I troubleshoot-made it and the error is "Windows could not fine a driver for your network adapter" HELP Please thank you.

  If you have recently installed Windows 7, you must also install the device drivers for your hardware.  Windows has some drivers shipped with the operating system, but away from it all.  They are not necessarily the best drivers.  For example, you may be using a generic video driver with limited capabilities.

  Looks like you need at least the network adapter and video drivers.   It is best to get their form your computer factory web site.  You need to get the Ethernet disk using another computer to get to the line at the start.

  I recommend that you check device manager and see what other devices may need to update.

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• I can't find the driver for my network on 431 Hp windows 7 32-bit controller

  Hello, I have a problem here. IM using 431 HP with windows 7 32 bit. I can't find the right driver for my network controller. Here's my hardware ID:

  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280

  I try so many driver for wifi but none of them works. my wifi can not always be used, and it says that it cannot find a driver.

  Here is the status of the device:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  Please can someone help me? Many thanks for you guys

  Hello:

  Here is the link for the driver you need for the Atheros wireless card in your notebook.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• HP Officejet 4630 is unable to install the driver. Windows XP Sp3

  Good evening

  I bought this printer earlier today and a few hours already on this issue. The box is not too far away, and the printer could come back soon!

  The printer works fine, it was connected to my router, the light is always on, it says connected to the wifi system. Print the confirmation of wifi connection page, everything is 'Success'

  My problem is that whenever I try to install the drivers, the research of setting up a printer that is connected but not yet installed. He notice my printer with the right ip address, then copy the driver of a couple files and then tells me it is unable to install the printer.

  The current configuration is OJ4630_198, I found an older version and tried it but roughly the same results, except that before it stops the installation telling me he fails to do so, it asks me to locate the HP CD on my cd player, looking for a fax facility facility .png but fails a second later.

  I am naïve enough, I tried to install it manually, but of course the Communication Port is a little tricky with a wire less printer.  I noticed there's a selection of "Create a new port" available in which appears an option named "Hp discovered Port Monitor (HP 4630 series)" which curiously is my new printer. Tried but it doesn't work.

  I reset my router and printer, pc several times, tried to assign my printer to another port number, all ended with the same results. It connects to my wifi, but I can't seem to install the printer driver.  So my list of printers is empty atm...

  Thanks for any help,

  Very appreciated

  Windows XP Sp3

  Cisco router

  ZoneAlarm firewall...

  Well, problem solved.

  It is indeed a Windows problem.

  Thanks to SAM from live chat assistance, he noticed the HP Installer wasn't working, so we tried to manually install the printer with the tcp/ip Protocol and former driver windows Xp Announces (deskjet 990c) who worked...

  I hope that everything is still functional. But Kudos to SAM for a helping hand.

• Of VMware Remote Console Plug-in Setup error: "unable to install the hcmon driver."

  Hi all

  I try to install the VMware Remote Console Plug-in for my browser of 32-bit Internet Explorer 11, and I get an error message during installation: "Unable to install the driver of hcmon."

  I have Windows 7 64 bit with .NET installed 4.5.5. Anything installed in my device manager, there is no hcmon.

  I use an x 86 install files to VRMC (VMware-vmrc-win32 - x 86 .exe), but I guess that this 32-bit version is what I want because I use THE 32-bit? Or is that what I want 64-bit for my OS?

  I've seen some posts related to this issue, but all my registry keys seem to be set correctly and my .NET is of course more recent than the version 3.5 SP1, but I hope it's OK.

  Also, I got an error on the USB in my Windows logs Arbitration Service, but following the steps described here, and retry the installation also failed with the same error 'hcmon' described above:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2043656

  Any ideas on what might occur, or other things I can try?

  Check if these KBs contributes to:

  http://KB.VMware.com/kb/2053281

  http://KB.VMware.com/kb/2006486

• I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system. Any ideas?

  Original title: Microsoft. NET Framework 4 client for windows 7 X 64 profile base system

  I'm unable to install the Microsoft. NET Framework 4 client for windows 7 X 64 profile base system.

  Any ideas?

  Thank you.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand that you have a problem with the installation of Microsoft. NET Framework 4 client profile. I will certainly help you in this matter.

  Provide us the following information to better help you.

  • Have you made changes on the computer before this problem?

  • You receive an error message/code?

  Follow the below methods:

  Method 1:

  The .NET Framework 4 Client Profile is available on Windows Update
  http://support.Microsoft.com/kb/982670

  Follow the method 1 and method 2 in the article and check for the issue. If the problem remains same follow method 2.

  Method 2:

  Disable the .net framework Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off .net framework, click the media feature. And the .net framework and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate the .net framework and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Please let us know if you need more assistance.

  Thank you.

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

  External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

  Hello Sharan,

  These links may help:

  http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

  http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

• Windows 7 says I need to install this driver for the scanner to work, but I can't. HP m1522nf driver wia

  Windows 7 says I need to install this driver for the scanner to work, but I can't.

  As for all the HP drivers, simply visit the HP support site http://support.hp.com/, enter the model number in the search box, click on the link drivers and you're there.  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3442754&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3442750

• "Unable to install the plugin from RoboHelp for FrameMaker...." »

  Hi-

  I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

  No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »

  
  With your permission, I'll cover a few points in the order in which they come to mind:

  == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

  == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).

  
  == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.

  
  == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.

  
  == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

  1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
  2. in the [APIClients] section of the maker.ini file, add the following line:

  RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

  3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

  This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

  (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

  In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

  Thank you-

  Anne

  If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

• Virus & spyware definitions update failed. error code: 0x8024402c. Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Virus & spyware definitions update failed.

  error code: 0x8024402c.

  Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936.  I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others.  I hope that this will solve the problem.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.