W520 stuck on 800 MHz (bios1.26) on the sector without the battery!

Similar Questions

• My computer is old and slow. What can I do?  I have a 4 GB 800 Mhz DDR2 SDRAM.  The processor is clocked at 2.66 Ghz Intel Core 2 Duo I Mac

  My I Mac computer is older than 6 years and became slower and slower.  I added the memory once in the past which has contributed to the speed.  He was clocked at 2.66 Ghz Intel Core 2 Duo for a processor and memory is 4 GB 800 Mhz DDR2 SDRAM.  I wonder if I it is better to buy more memory or if the computer needs to be replaced, it still works very well for email and working on small documents, but it is really slow and crashes when working with images and large files.  Any advice is welcome.

  I have a similar computer.   It will accept 6 GB of memory.   It is far from slow and Etrecheck reports he cited as excellent.   I think you have some unnecessary baggage in tow.   Why not download and do a report for us Etrecheck.   Publish it as an answer, here, and maybe we'll find the reasons...

• Satellite C660 - DDR3 800 MHz Does really exist?

  Hello everyone,

  I did face a strange note on Toshiba Satellite C660 - 15G. On the specs page there says denunciation that supported for C660 - 15G of RAM DDR3 (800 MHz). Is this good?

  Please see the page specs for C660 - 15G here:
  http://Gulf.computers.Toshiba-Europe.com/innovation/en/product/satellite-C660-15G/1099580/toshibaShop/false/

  Standard system memory: 2 048 MB
  maximum extension: 4 096 MB
  technology: DDR3 RAM (800 MHz)

  I know the 800 MHz DDR2 RAM is!

  To please its urgent for me and I need an answer

  All eyes

  Hello

  Yes, modules DDR3 800 MHz is an official specs and these modules are on the market so it accurate's on the Toshiba page.

  So if you want to upgrade memory you have modules DDR3 at 800 MHz or faster (faster modules are compatible downgrade).

  Memory expansion, you can get each authorized service provider or normal computer store.

• Satellite U400-138: RAM works with 667 Mhz instead of 800 MHz

  Hello

  I have Satellite U400-138 with 3 GB of RAM (2 + 1 GB sodimm modules)
  I have new kit 2x2gb sodimm-s Corsair PC6400(800MHz)

  When I install new modules, system reported that they are working on 667 Mhz instead of 800 MHz,
  Maybe that's the problem BIOS chipset because that support this frequency.

  Help me, what to do, to run new modules on 800 MHz?

  Hey Buddy

  I doubt that it is a BIOS problem.
  The point is that the speed of the RAM can be lowered and locked by the FSB (front side bus)
  If the FSB supports only 667 Mhz then your RAM 800 Mhz will run only at 667 Mhz

• Sticks of DDR3 1066 mhz 2GB x 2 clocked at 800 mhz on Satellite L500-1TU

  Hello world!

  So I bought this Toshiba laptop 2 weeks ago
  http://PT.computers.Toshiba-Europe.com/innovation/product/satellite-L500-1TU/1082331/toshibaShop/FAL...

  Sometimes, I noticed he has a few hicups when im game or on youtube, as the noise loops for about 3 seconds then its normal again.
  I was scared, it was a defect in the ram and ran memtest and CPU ID

  But even if the memtest did not get any errors, I noticed something, the mem test and the CPU ID say that the RAM is running at 800 mhz, when they are both DDR3 and should be run at 1066 mhz...

  Here are screenshots from CPU - ID
  http://img63.imageshack.us/GAL.php?g=96346130.PNG

  As seen on CPU - ID, the laptop runs with 2 slots of these:
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/individualOptions.do?service=UK&OPTION_ID=1059...

  Also, I went into the BIOS and there is no way to change the frequency of the RAM.

  In addition, all pilots, including the BIOS are up-to-date.

  Could this be a fault of the laptop?

  >... and CPU-ID say the RAM is running at 800 mhz, when they are the two DDR3 and should be run at 1066 mhz...
  Why do you think they should operate on a 1066 MHz?
  If the speed of the motherboard FSB 800 MHz faster RAM modules will be slow to run on 800 MHz only.
  Believe me that everything is OK with the modules of RAM.

• X61t 800 MHz (PC2-6400) memory upgrade

  Upgrades memory to a X 61 Tablet possible 800 MHz (PC2-6400)? The standard is PC-5300, but the laptop has a 800 MHz FSB.

  I apologize in advance if this is a stupid question.

  -Keith

  
  

• I have and Acer Aspire 5516 with 1.6 ghz processor. But his run at only 800 mhz. How can I fix?

  I have an Acer Aspire 5516 with a processor AMD Athlon (TM) TF-20, 1600 Mhz, 1 Lossnay, 1 logical processors
  The processor is supposed to be clocked at 1.6 ghz. But it is only running at 800 mhz. What can the steps I take correct this problem? Thank you

  Probably something wrong with your path. Try

  %SystemRoot%\system32\wbem\wmic cpu get List

  Also type

  path

  and report what he said. And type

  dir %systemroot%\system32\wbem\*.*/a/s

• Memory at 800 mhz PC2-6400 ddr2 at 667 mhz

  I have the 800 mhz cpu T9500 in the Pavilion dv9700 laptop. I don't have the options in the Bios to change the speed of the memory, although it seems that the memory is clocked at 800 mhz and 667 mhz not. Does anyone know how to change this?

  Hello:

  That is right.

  The mobile version of intel of the 965 chipset runs only the memory at 667 MHz and the desktop version of the 965 chipset running at 800 MHz memory.

  A little known fact, but it is what it is.  See page 12 of the datasheet below.

  http://www.Intel.com/assets/PDF/datasheet/316273.PDF

• Anyone using DDR2 - 800 MHz PC2 - 6400 RAM on a Dimension E520?

  I have a 8-y-o Dimension E520 with a CPU Q6600 and 4 GB of RAM PC2-5300 DDR2 - 667 MHz.

  Max RAM is 8 GB so I did research what type of RAM would maximize the expected gain in speed.

  According to this articleand this one as this thread of Dell, the E520 can accept RAM PC2-6400 DDR2 - 800 MHz.

  In addition, in accordance with this sheet of Intel chipset 965 on the motherboard will have DDR2-800 MHz RAM.

  I have noticed however that a sweep Crucial suggested DDR2-667 PC2-5300, like upgrading RAM later.

  By no means discouraged, I advanced and bought 4 sticks of 2 GB of RAM DDR2-800 PC2-6400 Non ECC Unbuffered of 240 pins.

  Then, installed the new RAM and started in the BIOS. Of course, the 8 GB of RAM is recognized.

  Then started to Ubuntu. However, the initialization has failed before he arrived at the office.

  Then started to Windows 7 (on the same machine, multiboot). Yet once again, began to start Desktop but bluescreened before that he (0 x 00000019 which seems to refer to the memory problem)

  Reinstall all the RAM sticks and tried again with the same result.

  Replaced the 4 GB of RAM has low gear and everything was fine.

  So, is the RAM purchased dubious quality or not my E520 simply not accept RAM DDR2 - 800 MHz?

  In the interest of anyone else might have the same problem or similar, I put the 4 sticks of RAM to the reseller and received four sticks of replacements of the same specification.

  And they work perfectly in my Dimension E520.

  Thus, in response to my original question, the absence of start-up stems from a faulty RAM.

• Inspiron 570 desktop PC "AMD model unknown proccessor 800 mhz.

  Hello.

  I have an inspiron 570 desktop PC. I recently change the Athlon II X 2 250 3 GHz of AMD Phenom II X 6 1055 t 2.8 GHz Six Core Socket AM3 CPU HDT55TWFK6DGR.

  the processor enters taking the A3.
  but, when I check on my computer, it says "unknown amd 800 mhz model.
  32-bit, x 64 bit processor.
  Please help me.
  im stuck

  Hello!  A couple of things come to mind.  First of all a upgrade you to the latest BIOS available?  It's the first thing, 2nd if you did update the BIOS or not, even the BIOS recognizes the new processor?  It seems that the Phenom II X 4 is the highest supported processor.

• Compatible logic for iMac G4 800 mhz 15 '' advice

  I have a model of non-working iMac G4 15 ", 800 mhz, 256 MB, 60HDD that I acquired recently. The seller said the power supply to the motherboard and the power are bad, but everything else is fine including the 15 "lcd monitor. There are various imac models g4 and I was wondering which are compatible with mine. A 17 "/ 800 mhz will work?" A 700 mhz/15 "will probably work? What the 1 GHz/17 model "?"

  You will appreciate all help. Thank you.

  Unfortunately, these are among the most notoriously difficult to replace logic boards.    Other problems include the fact there is a factory specific tool that's hard to find to adjust adjustable chrome stand the LCD is connected to and it is very difficult to put back together without fraying the wires in this pass, or make sure that the neck becomes too loose.    Mentions not there is a balance of cooling gel, and existing buffers that can if installed wrong can lead to overheating of the machine.    The only motherboard model, that can work, is simultaneously published 700 Mhz model.  The CPU on this model is too slow to use the iDVD delivered versions were compatible with the model, if the DVD drive would be probably better served by a CD - RW drive at 800 Mhz instead, or Combo drive unless all you want is to burn data DVDs and not to make your own movies.  http://www.lowendmac.com/ and http://www.ifixit.com/ have a lot of relevant information as well as http://www.everymac.com/

• I have an iMac OSX 10.8.5 2008 30.6 GHz Intel Core 2 Duo Processor with 4 GB 800 MHz DDR2 SDRAM Memory and 1 t HD

  I have an iMac 24 "Early 2008 OSX 10.8.5... 30.6 GHz processor Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM memory and 1 t HD.  Can I upgrade the processor speed and if so what.  Can I upgrade the memory and if so what.  I launched iPhoto ' 08 7.14.  Any input would be great.  Thanks for your help and suggestions.

  You can actually move the ram to 6 GB.

• Upgrade memory 667 MHz to 800 MHz on a SP P200HD-1DV

  Satellite Pro P200HD-1DV dating 2 048 (1 024 + 1 024) MB RAM * 667 MHz DDR2 *.

  Fact DDR2 * 800 MHz * work on this laptop?

  It will be worth spending the money to make this upgrade as a significant difference in my speed of laptops?

  What memory should I put in to get the most out of my laptop?

  Any comment is appreciated.
  Thank you.

  For more of your laptop just use compatible and recommended memory module. For your laptop model, you must use:
  -1 GB-DDR2-667-PA3512U-1M1G
  -2 GB-DDR2-667-PA3513U-1M2G
  Put this number in Google and search for stores where you can order.

  Good bye

• Satellite M30: 1.8 Ghz CPU stuck at 598 MHz

  Hello

  My CPU is stuck at 598 MHz. I think it has been like this since I bought it 2 years ago. I am in Australia at the moment and very rude support could not help.

  I did a search in google and got a few answers, but nothing helped. I tried to change the management settings power, BIOS settings, BIOS upgrade, etc.. Nothing! The CPU runs at a max of 598 Mhz

  Any ideas. I heard that there is a utility that could solve this problem, but toshiba has taken off the Web site for any reason

  Andrew

  No, no update of the utility or the BIOS update will help.
  It seems that the firmware must be updated on this laptop.

  For the most part this microcode update is necessary after the replacement of the motherboard.
  I think that there is without a lot of do you contact the service partner in your country for the microcode update

• Re: Satellite X 200-can I use the 800 mhz memory modules?

  Hello.

  I have a X 200 with 2024 MB of ram.
  I want to spend to 4048 MB ram.

  Is it possible to buy memory ddr2 667 or 800 mhz can I use?
  I think that my motherboard is as follows:
  Intel PM965 Express chipset.

  If its so I can only use ddr2 667 mhz, can I then use any mark at all, or is it special that toshiba recommends?

  You should be able to use the 800 Mhz modules, because the FSB supports 800 Mhz also.

  Greetings