programs like firefox desktop shortcuts, norton360 has stopped working.

Similar Questions

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• continue to spread the message ' desktop window manager has stopped working and was closed ".

  continue to spread the message ' desktop window manager has stopped working and was closed ".

  The office then blinks and I can't use the Aero feature.

  Any correction or known issues?

  Thank you
  in2stocks

  Hello
  It is usually a video driver issue. Would like to know what controller you have and see if the manufacturer has a new driver for Vista.
  Please let us know if that was the issue.

  Mark <> Microsoft Partner

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• My Lightroom worked the perfect time, but today when I start the program I get a message "Lightroom has stopped working".

  My Lightroom work all the perfect time, but now when I start the program I get a message "Lightroom has stopped working".

  I use Windows 7 pro SP1and Photoshop and Lightroom CC. I think that it is a more recent version.

  Yes, I use the administrator account

• Programs Office Compatibility applications Applications miomore has stopped working

  The MIOMORE DESKTOP Manager Mark MIO GPS program does not work under Windows 7.

  The installation takes place properly, and launch appears the message "MIOMORE has stopped working".

  Uninstall, new installation, nothing works!

  Launch in Windows XP SP3 accounting mode which worked before moving to Windows 7 launch of the same message.

  I installed the latest version of Adobe FLASH Player (11.6.602.180) and it still doesn't work.

  The MIOMORE DESKTOP version is Davis: V7_30_005_SP, and does no better than the version Report.

  If you have encountered the same problem, please pour your help.

  The company MIO is unresponsive to my requests.

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• On the desktop Media Center has stopped working Windows 7

  Media Center has stopped working need a fix?

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Uncheck Windows Media Center

  Click OK

  Restart when prompted

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Check Windows Media Center

  Click OK

  Restart when prompted

  Try to play again.

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• y at - it an update for lightroom 6 desktop?   Mine has stopped working.

  My lightroom 6a stopped working - windows.  Y at - it update?

  Hi albert Timothy,.

  • Please post the report here.
    Uncheck 'use Graphics Processor' of Edit > preferences > Performance

  

  • If ensure that your graphics card, driver card is to date see to update the graphics driver. 8, 7, Windows Vista
  • Restart Lightroom
  • If the problem persists, follow steps in Adobe Lightroom GPU troubleshooting and FAQ

  Let us know if this helps

  Concerning

  Assani

• New computer, Windows 7, my shortcut icon has stop working?

  I have a new computer with Windows 7. I downloaded Firefox 3.6.3. After several days, I found that the shortcut on the desktop would not start Firefox. I have Firefox open with a number of open tabs, but cannot open another window of office.

  Chris, I closed Firefox and restarted. It woks fine now. I'll keep your answer in case this becomes a recurring problem.

  Thank you
  Bob

• Firefox 7.0.1 has stopped working on my wiki (hull.ac.uk/awe). So has Hotmail: both are still in IE 7.0.5730.11. Connections look good: it's just the HTML is not displayed. I deleted some code/action unintentionally?

  I use Firefox 7.0.1 on an old Dell with Windows XP Home edition machine. For years, I used Firefox to work on my wiki (hull.ac.uk/awe) without any problems. In the last month or two, the browser refused to apply the wiki markup in the way I used to see, unlike IE (7.0.5730.11). Hotmail also no longer works in firefox, though it's fine in Internet Explorer. (In a moment paranoid, I was afraid that Microsoft was blocking Mozille; but this seems unlikely.) Connections look good: it's just that the browser is no longer implements/displays the text marked in the way I want (and I'm used to) to see. I deleted some code/action unintentionally? If so, how can I return it?

  Try to upgrade to Firefox 8.0.1

  You can find the latest version of Firefox here:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• my wireless to my desktop computer keyboard has stopped working

  my keyboard wireless for my OSX EL CAPITAN

  2.7 INTEL CORE i5 does not work

  Try these tips...

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• Desk tray Agent has stopped working.

  My desktop tray agent has stopped working and he wants that I either debug or close the program. No icons on my desktop does not work once the sign appears.

  Additional...

  Go to programs and features, or add, delete, application > scroll down and find qwest touchpoint agent > uninstall it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• set office agent has stopped working.

  Original title: desktopagenttraystoppedworking.

  top agent Office has stopped working

  You will need to provide more detailed assistance, maybe a screenshot of the window/error message.

  However, like, take a look at this old post to see if it helps - http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/desktop-tray-agent-has-stopped-working-in-windows/d0df5050-a07c-e011-9b4b-68b599b31bf5 (if you have / use 'quest' - there are other similar items as well)

• COM Surrogate has stopped working. I use Google Chrome

  COM SURROGATE HAS STOPPED WORKING RECENTLY AFTER THE INSTALLATION OF GOOGLE CHROME! OR COINCIDENCE... Not sure!  Thank you very much.

  Hi EvaCalif,

  Follow the steps in the link with the similar question and let me know if the problem is resolved.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/errorCOM-surrogate-has-stopped-working-while/3c13ade5-0be0-464c-b677-b28253463fc4

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/COM-surrogate-has-stopped-working/3aacb95b-B72F-4B0E-807a-62b7e7298d4d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/COM-surrogate-has-stopped-working/71199313-99a1-43fa-Abda-ab44a84bfb6e

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/COM-surrogate-error/0bec0d1c-e0d8-4fed-81F3-910973b14bb7