Similar Questions

• the component business project does not contain a valid connection

  Hello
  
  I get this warning appearing in my project when I run:
  
  WARNING: env_appln: the business component project does not contain a valid connection
  
  env_appln is the name of my project
  
  No one knows what it is and how I would go about fixing of this?
  
  Thank you
  -Mark

  Mark,
  It just tells you that the DB connection that is used in conjunction with the application module is not correctly configured (wrong username or wrong db pwd).
  Since you have not mentioned the jdev version you use I'll assume that 11g.
  Click the database tab, find the node with the name of your project and open the node. Inside, you will see the db connections uses the module of the application. Right-click on each one and select Properties, check if all directions are written and test the connection. If you see "Test passed" for all connections the error message should disappear.

  Timo

• Firefox does not connect to any Web site, but other browsers will.

  When I get something in the URL- google.com, localhost, http://127.0.0.1/ one bar the IP address, there is a fraction of a second flash, then the bar becomes empty and nothing has changed. It seems that Firefox is not even try to connect to the internet.

  Yesterday, everything was fine when I was running FF on Windows 7. After the upgrade to Windows Pro 8, Firefox has failed. I've updated for Windows 8.1, hoping for the best, but it's the same problem.

  I've walked by the firewall program, several times (the only race is the built-in Windows Firewall). Finally, I uninstalled Firefox, including all my settings, custom and reinstalled from scratch, twice. And even this version pure and clean Firefox does not connect to the internet.

  I am a computer web developer and would be happy to look at the log files or run a tool (Fiddler?) to see what happens at a low level, if I only knew where to look.

  john99, thanks for the links. I went through all (again), one by one. The last link kb.mozillazine.org/Standard_diagnostic showed me what helped. I've renamed "firefox.exe" to "firefox1.exe" and was able to use firefox.

  It made me suspect the firewall or malicious software. I ran a Malwarebytes full scan, zero problems detected. I have pored on the entries of windows firewall, the "Windows Firewall with advanced security" view and also the simple control panel view. The only mention of Firefox is that I continue to add and remove to allow firefox through.

  Here I knew what was going on, but for now, I can at least use firefox. How frustrating!

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• RealPlayer does not connect due to lack of MSVCP90. DLL

  Original title: of .dll

  Hello, I downloaded RealPlayer, but it does not connect because of lack of the MSVCP90. How can DLL, I download this?

  Hello

  ·        When you get this error message?

  ·        Have you been able to play the songs before on the system without any problems?

  I suggest to do a SFC (System File Checker) scan on the system and check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  I suggest you to download the latest redistributable package Microsoft Visual C++ 2010 for XP on the system and check.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84&displaylang=en

  The question you have posted is about issues with Real Player, and I would ask you to contact the manufacturer for assistance.

  http://real.custhelp.com/app/answers/detail/A_ID/7695/tabname/TAB0/support_type/null

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Vista does not connect to the network at startup folders

  Unlike XP, Vista is not automatically mapping/connecting to my WiFi network at startup folders.  Every time I have start or restart, Vista does not connect to them, and I have to manually complete the task.  All folders that I want to connect to are marked "Reconnect at logon."  How to get Vista to connect to these folders when connecting as it is supposed to?

  Hi Peters4,

  I have some questions I need to ask:

  Once have connected you to the computer, you still see the disks with a red X on them or they have gone completely?
  If they have the red x, connects by double-clicking on them?
  If you are prompted for a password?
  You map drives using an IP address instead of a name of sharing?
  Are you using the built in Windows Vista wireless client or other software to connect to the wireless network?

  You could try the following drive mapping and see if that fixes the problem:

  • Press Start.
  • Type CMD in the Search box and press ENTER.
  • Right click on cmd.exe and select run as administrator.

  At the command prompt, use the following command:

  net use x:-\\nom_ordinateur\nom_partage\ / persistent: Yes

  (where x is the drive letter you want to assign.)

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open the other projects - does not work

  Hello-
  
  We just finished a lesson of the CBT in the 3 Hat, which includes 29 separate projects. At the end of each project, the student is introduced a button to bring to the next, that is 'open another project '.
  
  That is the question, we have put this button 'Open another project' and 'open a URL or file '. In both cases the next project does not open. The user is taken to a page of internet search. We have implemented the system of 'Success' button using the Captivate files help where it tells remove you all the ways of the system and just use the names of file or project. Button settings in Advanced Interaction also confirmed.
  
  We publish our projects in .exe format. This concern is present when we listen to extracts using the feature overview and products .exe.
  
  What we're doing wrong, any ideas?

  Rick - your basic source code provided us the answer. We made a comparison and found verified the following on all of our projects:

  Under preferences - project - beginning and end
  Start of project options:
  Loading screen:

  This has been verified with blank if Cape tried to start the next project with a blank so it is lacking for a web search page.

  Thank you, SO MUCH

  Mike

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Messages does not connect to the Yahoo IM account?

  Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

  I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

  Hello

  I can't connect either (I didn't realize that I do not use)

  However going on the Yahoo Site and change the password does nothing.

  With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

  It does say read more suggests, is not Mail (after OS X 10.9 is OK)

  He does not on access to their e-mail service.

  There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

  I have looked in the help (a little) but still found nothing.

  

  20:49 Tuesday. October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.