Project Manager and inverse problems.

Similar Questions

• Features of the power manager and other problems associated with the T510

  For the better part of 5 years, I was a happy user of an IBM Z60m and decided it was time to move my z60 to my son and buy a new T510.  Well, I have after several weeks of property I can honestly say I'm irritated and frustrated by several current issues and I'm ready to send back all.

  Starting from the moment I pulled it out of the box I was having problems of power management.  I was on Microsoft help forums, called the lenovo support and spent countless hours on blogs and forums looking for help.   No matter what I do in the put lenovo on arrangements to take away my computer goes to stanby after one minute of inactivity and then wonder my windows password.  After a full day to insert my password my frustration level is off the chart.  I removed the password in the settings of the user who has not helped.  I changed the global settings to disable password in stanby mode which did not help.  I changed the function to optimize power and others, but none of it helped.

  Beyond these problems... I inserted two different discs to insert new programs and my system kept telling me that he did not read either.  I first thought they were zero but my old laptop ibm read without problem.

  So there you have it.

  Are you sure that the system is set the mode after 1 minute?  Or is the screen is locked?

  Try this:

  1. right click on the desktop and choose "Customize".

  2. click on "screen saver" in the lower right corner

  3. uncheck the box that says "On Resume, the logon screen"

  Which solves your problem?

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.

• Need help finding project manager

  Hey,.

  Publishing has just completed a project and you want to send it to someone without all the excess. I understand that you go to the Project menu, and then select Project Manager. Only problem is that I do not have a menu. Help, please.

  Hi Mike,.

  Check the menu file. Does it work?

  Thank you
  Kevin

• Error in project management

  Hi all the impossible project manage first cc 2015 without an error dialog box

  Hi Clarissa,.

  That would be my first suggestion:

  Create a new sequence with the same parameters as the sequence in question here (the one that does not). Copy the contents of the sequence shot and paste them into a new. Export a new using Project Manager and see if you still get the same error.

  Thank you

  Regalo

• Project manager not to prune the R3D files.

  Mac

  CS5.5

  I'm doing a project. I go to the project manager and select "create a new project trimmed.

  I understand handles 24f, Meda rename files match... etc.

  The size of the project resulting (EST) says 5 GB when the real project is proving to be 20 GB.

  Thoughts?

  (Btw, I tried collectors and copies the files and it was the same size (20 GB), as many images in both files)

  Cannot cut the R3D files.  She would need a codec RED to be able to generate new R3Ds... the best it can do is consolidate your project for only in the media which are actually used in the edition.

• Does anyone use the project manager?

  Hello

  I have printing that Manager project does not serve much. I use CS4.

  However, here is my attempt.

  I worked on a project for a friend, and as I was going out of town, he wanted to do a little

  editing on the project with his computer.  It also has the CS4.

  So, I used the project manager and made the following choices:

  1. I clicked on: "Collect files and copy them to the new location."

  2. I clicked on and chosen: "exclude the unused Clips.

  3. I clicked and selected: "Include preview files, 'Include audio conform files' and 'Multimedia files Remane to match clip names'."

  4. I made the destination of my office project.  He showed the 51 concert in the project.  Then I transferred all of my office to help connect an external hard drive with an eSADA.

  When my friend all this on drugs on his hard drive and opened his Pro CS4 the Prem, the project looked just like he did on my computer, with the exception: all the video clips were 'offline' of course, they were originally on one of my hard drives, but not "hard drive project.

  I expected the project manager to copy the files from all three of my drives with everything else.  In addition, some of the music was absent (offline).

  I expect too much from the project manager?  It will copy all files, audio, video, F / x all hard drives etc?

  I'd appreciate help here how to use the project manager and get everything.

  Thank you, Tom

  They are in offline mode because they aren't in the same place they were before - your office.

  Your friend will have to connect the media.

• Impossible to display the names of HTML files in the HTML Files (topics) folder in the project manager

  RH8, I want to see the names of the HTML files instead of topic titles in the project manager.  I chose the button toggle project manager and the name of the folder is passed to "HTML Files (topics)" of "Project Files".  However, the folder of files HTML (topics) lists topics with subject titles, rather than the names of HTM files.  I was expecting to see the topic list in the Manager component of project with HTM file names.

  What should I do to display topics by names of HTM files in project manager?  The rocker is not working properly, or I do not understand what the toggle button?

  This occurs for each project, we have - all of which have been improved from RoboHelp X 5 to RH8.

  Thanks for your help.

  Susan

  You switch between the new view and the classic view. Try the view menu.

  See www.grainge.org for creating tips and RoboHelp

• In the project manager, records under HTML files are duplicated in the Images, multimedia, records of luggage and Style sheets. -What happened? Duplicate folders and subfolders are empty, but cannot be deleted.

  I am using HR 11.0.4.291. Everyone knows that before (see screen capture)? I want to solve this problem, if I leave it for the writers of the future tech. Any suggestions are appreciated.

  

  Oh, and it occurs to me that article I have driven you is old enough (but still relevant).

  The "fix" for it is click on the icon below to toggle the display of the project manager.

  

  See you soon... Rick

• Project Manager hangs during fired fresh files and copy them to the new location

  Hello

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I'm under Premiere Pro CC 2015 edition on a Windows 10 machine. (I tried before 2014 CC edition WIndows 7 as well, same result, but I have not created a test case).

  An example of project (1,3 Mo) can be found at: Test_GH1_footage_collect_files_crash.zip - Google Drive

  Any suggestion for a solution or workaround are much appreciated.

  Thanks in advance,

  Arjan Mels

  Hi Albion,

  Thanks for your message and anxiety. I downloaded your sample project and media and was able to replicate your issue.

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I don't know why these images give you so much trouble, but there are a few things to check.

  1. Where is the folder for multimedia file structure? All I see is the raw. Clip of MTS.
  2. In general, you copy all the SD card to your computer HD, then ingest via the media browser
     1. This allows all the metadata to clips to be implemented with the clip.
     2. The clip needs this metadata so that it works normally.
     3. Many publishers of band on the metadata by choosing File > import and do not ingest correctly via the media browser

  I suspect that this could be at the heart of your problems. You could try a try and ingest the images correctly, so try and move the project with the project manager. If it still does not work, please file a bug herereport.

  Once I transcoded your footage to ProRes LT using Adobe prelude, I could ingest images, create a sequence, then moved the sequence and associated media without problem.

  Thank you

  Kevin

• Project Manager fails to cut after the new method to "consolidate and transcode.

  Greetings,

  I use first to create trailers and other equipment for a game studio. For the record, I use dxtory ( http://exkode.com/dxtory-features-en.html ), with the first/AE allows you to change the images and SOUL for rendering. A project may consist of several hundreds of GB's worth of the source footage. When made with a given project, historically I used method 'trim' first since the project manager to store copies ready images - as it is intended. This can turn a project with 400 GB of source down to a cup which is only 80 GB or more. This has worked well in the past, but because of the recent change to the new feature to "Consolidate and transcode", this operation will fail when the current creation.

  I created a full repro this for anyone who would like to try.

  The repro project: https://dl.dropboxusercontent.com/u/263501/misc/PremiereRepro/Copied_transcode_repro.7z

  I'm using Project Manager, select the following options:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_2.PNG

  This should lead to a MB avi ~9.9, which is 15 images of the larger video, the panoramic nature views slightly to the right.

  Instead, I get the following message after the end:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_1.PNG

  Looking at the directory for this new project "successful", the size of the file is the same as the source of the layer and without cropping footage actually occurred.

  The journal of the events, said the same thing:

  https://DL.dropboxusercontent.com/u/263501/Misc/PremiereRepro/pp_transcode_3.PNG

  This method worked 100% reliable before the new feature to "consolidate and transcode. It seems to be quite broken in the current one, at least for my purposes. I forgot something, or is this a bug? I am currently having to install an earlier version of first trying to work around this problem, but this obviously isn't the solution.

  You receive this warning as the selected Format (DNxHD MXF OP1a) does not support your combination of the size of the image, frame the combination of rate and on the ground. For example, DNxHD will support sizes 1280 x 720 or 1920 x 1080, while your source file is 1280 x 800.

  Try using a combination of Format/Preset that will support your settings of the source file. For example: Source of game (Mac) ProRes or CineForm Match (Mac and Windows).

  I hope this helps.

• Project Manager copy files and copy to the new location error

  Hello

  I have been using Premiere Pro 6 and CC now for a year now.

  I can't solve a problem is a problem of project management.

  I can create a new project complied every time, but I can't collect files and copy it to the new location?

  It fails every time with the message "an unknown error has occurred during the operation of project manager, please save your project and try again.

  I must have tried on more than 50 projects and it never worked.

  I hope there is a simple solution to what I need to create a full backup to transmit to another editor.

  Thank you

  Paul

  Disable the preview files and standardized audio files.

  See if that will do the trick.

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• HP Laserjet Pro M201dw: "then I explained the problem to management and they said not to buy all the HP printers more."

  Our two new printers Laserjet Pro M201dw are not recognized on the office network.   I have spent hours trying to understand this and posted questions on the forum Support HP, but without response. They became more disadvantages than thay are worth.  And that's enough.  Then I explained the problem to management and they said 'don't buy it not all HP printers more.'

  Thanks for the suggestions.

  I tried to BootP and disable ipv6 on a printer and at first, it worked (finally).  But then, after having unplugged and restarted, he returned to the ip address of connection no.

  So finally, I noticed and changed the setting of the link of "Automatic" to '100TX' speed full - and that seems to have solved the problem of intermittency.  I've converted and turn it back on, unplugged, etc., and it maintains the connection and ip address.

  Do not want to play with something that works, I can't say with certainty if the speed of one link would have solved the problem (probably not), but it seems that while your excellent suggestions finally established a network connection, the setting of explicit link speed was necessary to maintain the connection.

  Thanks for your help in this matter!

• When you use the project manager to copy a project and its files why do the resulting files to appear stretched?

  I attributed to a portable drive as destination, said the Manager to copy the files to preview as well. The images appear normal until this that copied; Open the newly copied project gives me unwanted horizontal stretch. Source file was a H264/MOV of a dslr transcoded in mxf.

  10.9.2 CCPP/Mac

  Thanks much for the advice. Management/copy of video projects is new territory for me.

  All I can think is to right click on the source item in the project Panel, and then select Edit | Film and back to square pixels.

  I don't know why or how it is possible for that to happen. Very strange.