Projects of the aggregator and evolving HTML content

Similar Questions

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• How to set different fonts for numbers in the titles and tables of contents

  Hello

  I noticed some people to use a different font for the numbers in the titles and tables of contents to get an extra magic. Is it possible to automate the use of fonts in paragraph styles?

  Oh and suggestions on which fonts would be a good thing for numbers?

  Thank you!

  Furthermore, you must doany of this fancy stuff if you use an OpenType font that made OSF glyphs (and if you are not you will need to set the font as part of your style). Just head on to the style definition and enable OSF there OpenType features section.

• A project for the WEB and AIR

  I have a flex project... its been already, for the web. But I need an AIR version to run in our stores. The air version is essentially the same thing with a few adjustments.
  
  So first of all in flex builder, that I already put it in a web project... is anyway output a .air file now?
  
  Also in order to keep both versions in sync I would keep it as 1 project, a way for the project to be able to detect if it was 'plane' or not and to behave accordingly. In this way when the inevitable changes to do in the future I will not remember to bring any changes in both versions... Is it possible to implement?
  
  I'm using flex builder 3.
  
  Thank you!!!

  I found an article about this here: http://www.adobe.com/devnet/air/flex/articles/flex_air_codebase.html

• MAF: Navigate between the AMX and page HTML

  Hi all

  Now, I use a scenario:

  First step: a.amx-> b.html (also want to pass some parameters)

  Second step: b.html-> a.amx page

  
  

  How to implement the above function? Could someone give me some advice about this? Thanks in advance.

  
  

  
  

  Byron

  Concerning
  

  Hello.

  Since you can't combine HTML and AMX pages in the same element, you will need to create two separate functions. Unfortunately, HTML features cannot use the workflow. It complicates things a bit.

  A.AMX must be in a workflow. B.HTML should be the default page for the HTML feature.

  You must create a scope of Application JavaBean. This bean, implement a method that calls the HTML function. This is done via the utilities of the MAF container API. See http://docs.oracle.com/middleware/maf210/mobile/develop-maf/appx-maf-javascript.htm#ADFMF23884. You must also add a property for the parameter to the JavaBean, but also a getter/setter methods. Bind the JavaBean property on the a.amx page. This can be done by a setPropertyListener, for example.

  To navigate from a b, add a method call to the workflow where a.amx is referenced.

  To read the value of parameter b.html, simply use the MAF JavaScript APIs in your HTML page to access the value stored in the JavaBean.

  To return to a.amx b.html, use the goToFeature API JavaScript method. https://docs.oracle.com/middleware/maf210/mobile/js-ref/adf.mf.api.html#gotoFeature. The full reference for the JavaScript API of MAF is here: https://docs.oracle.com/middleware/maf210/mobile/js-ref/toc.htm.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Extract the href and src html attributes

  Hello
  
  I'm looking for some time and did not understand how to retrieve all the attributes href and src to an HTML document.
  
  This is the model I currently have stuck:
  

  regexp_substr(fi.texte,  '(href="|src=")...???...', 1, 1)

  How to extract only what is in quotes for each attribute href and src?
  
  Thank you
  Bruno
  

• Gamepad Xbox 360 but not installed projection in the DM and will not work.

  I installed my xbox 360 controller. It has first been installed a few months previously and showed upward in Device Manager. then I disconnected and never used until today (or so I tried)... now it does not show in the SM, but you can hear the dingding when I plug in and when I unplug the unit, but nothing happens and I can't figure out how to get my pc to recognize it again. Please help... my console real xbox 360 should be disabled so that it works, or can I use it with my pc while the console is still? Help

  Hello

  Here are some steps that you can try before you contact the Xbox team.

  Step 1:

  Connect your Xbox 360 to the computer power turn it on and restart the computer to see if it is recognized by your computer.

  Step 2:

  Try to run Windows update on your computer, if there are drivers available, they will be installed and could help recognzing Xbox on your computer.

  Step 3:

  Check to see if you can recognize the device through other USB ports on your computer.

  For more information, see the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Also post your request in the Xbox forums.

  http://forums.Xbox.com/

  Concerning
  Anthony

• Aggregator and Captivate 6.1

  I have 4 projects Captivate brought together through the aggregator.

  When the 3rd draft loads, it is moved to the bottom with white space above.  I have created a new project of the aggregator and published, republished the Captivate project, confirmed that all borders are turned off (although from my experience, the aggregator ignores borders anyway).

  I inserted a picture here - the white space above the project isn't supposed to be there. Note that the playback bar is off to midway up.

  Any ideas?

  Thank you

  Tichelle

  

  I found the problem.  The 2nd project displayed in the aggregator was illuminated borders. The 3rd draft (the one in the picture above) had borders extinguished. Once the borders have been disabled in the second room and reprinted the third room displayed correctly. I created a new aggregator and added one of the projects at once, publish and test with each project that I added to the aggregator.

• Problem of the aggregator? First project shows no more

  I use 6 Captivate.  I loaded two projects with the aggregator to http://www.writingforresults.net/workshoponline/test_05.htm.  The display begins with the second project, and can't get the first project display.

  I tried to launch the group project again in Google Chrome (before I was using IE).  The first time I did it, it worked fine.  The second time, however, it started with the second project, and I could not return to the first project.

  If anyone can offer a glimpse into what I did wrong, I would be very grateful.

  Kind regards

  Rob Parkinson

  Just checking.

  You uncheck the option "navigate to view slides only" in the files in your project? You must re - publish all your modules separately and build your aggregator from scratch.

• Navigation between the SWFs in the output of the aggregator

  The CP4 aggregator is an excellent tool again, but I need some advice on customization. Because the aggregator generates an HTML and SWF that serve as the skin for the films Captivate it loads, on-board navigation in Captivate movies (i.e. "chaining" films using "Load project" or "load URL / file ') no longer works. "Load project" fails because there is no HTML file to launch, and "Load URL or file" throw the user off course and the target SWF in the parent window. That means the user depends on the table of contents to navigate between Captivate movies.
  
  I hope that somebody figures a way to control the SWF aggregator since in Captivate movies so navigation between Captivate movies can be achieved with a next button or other object.

  After that play with it some more, Steve is right... Captivate movies added to a project aggregator do default Garland. Specifically, what has worked for me puts the end action 'Stop' in the project preferences, the last slide on the the exit action to 'Go to the next slide' and the next button or click action box to "continue". Works great!

• Questions of the aggregator

  I'm desperate charges aggregate but having problems.  My last one is that I saved a project like SWF and that he did not understand the HTML 5.  the thought that as aggregator saw the file OK did, I get this error

  Sorry, it's so hard to read.  Point is, he says it isn't an Adobe AS3 file.  What is c?  Since I did it with Cap; tive, it would make sense that Captivate should be able to read.

  They are very old Captivate published of the SWF? Before 5, AS2 was often used. But your other similar question, in my view, that you have problems with the workflow to create an aggregator project.

  Normal workflow for the aggregator is:

  • publish the Captivate SWF files, you only need the SWF itself
  • Click on the + button in the aggregator and point to a SWF file
  • continue to do this second step
  • indicate the SWF file to use as the master movie, its parameters for TOC will be used
  • Finally, you can override the info by using the Info button
  • Save the aggregator project, the extension will be aggr
  • check publish settings (important if you need do a right-click feature, default accessibility is turned on)
  • Publish it

• How to remove a folder in the sidebar and drag it to the desktop

  I've been working wth a folder and in any way, he got pinned to the sidebar. I tried right clicking and dragging. However, the ability to detach it and move it to the desktop is not available.

  Please help because I'm desperate to get work that I need in the folder.

  Thank you.

  Hello

  1. are you referring to the taskbar of Windows or the Windows Sidebar?

  2 are you able to access the folder and all its contents?

  I suggest to follow the article below troubleshooting steps and check to see if that fixes the problem on your computer.

  Customize Windows Sidebar

  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Sidebar

  Send us a screenshot.

  How i: post a screen shot on this forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Hope this information helps you.

• evolution of the coast on the .avi and .wmv files

  Have windows vista 64 bits, windows media player 11.  Have the movies, photos and music on my computer.  Have a PS3 in the living room that I use to watch movies, look at pictures and listen to music.  Everything works fine as long as the media is in the correct format.  My son has a PSP using remote play to sign in on the PS3 and it can watch movies, etc. on his PSP.

  Problem:  Can not figure out how to limit some of the media to keep my son 8 years of viewing/listening to him.  Parental controls on the PSP, etc don't allow you to restrict the DVD and Blu - Ray content.  In WMP, I noticed that you can limit the content that is visible to other network devices to "unrated", which could solve the problem if I could change the rating.  All video files just to say "unrated" and it doesn't seem to be a way to change this.

  Question:  How can I limit some media files so that my son can not simply watch r rated movies etc. in addition to remove them all together?

  Problem:  Can not figure out how to limit some of the media to keep my son 8 years of viewing/listening to him.  Parental controls on the PSP, etc don't allow you to restrict the DVD and Blu - Ray content.  In WMP, I noticed that you can limit the content that is visible to other network devices to "unrated", which could solve the problem if I could change the rating.  All video files just to say "unrated" and it doesn't seem to be a way to change this.

  Question:  How can I limit some media files so that my son can not simply watch r rated movies etc. in addition to remove them all together?

  To order a video, make a right click, choose 'rate' and choose what notes you want.

• Encryption and protection of content for blackBerry Smartphones

  Hello

  I read on the encryption available in the display of the memory and protection of content under general security settings.

  They both seem to do the same thing (although I guess I'm wrong). Is there any point having both power?

  Thank you

  Paul

  Hi Paul,.

  Encryption listed under Options | Memory is only if you have an inserted memory card. I do not have the protection of the Protection of the content the content of media card. Here ' s2 KB articles detailing the differences between the 2:

  • Content protection - http://www.blackberry.com/btsc/KB15244
  • Encryption modes - http://www.blackberry.com/btsc/KB11663 of media card