NAC Depolyment for wireless network

Similar Questions

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• dv6810us don't Scan for wireless networks

  I have a Pavilion dv6810us notebook running Vista Home Premium. It has the Atheros AR5007 wireless card. There are ten days, he stopped searching for wireless networks. I can only connect to a wireless so I manually enter the SSID and password in manage wireless networks. The connection to a network screen displays the message, "Windows cannot find any additional network." The box at the top right of the screen does not work. The last day, I was able to find wireless networks was at a Starbucks in New York on 29 October. Help, please. Thank you.

  Please do not hold account that last response. I did a Google search and found at www.wefi.com. It works! Thanks a lot for your help. I like the fact that the software gives you a list with icons that tell you if a hot spot is protected or not, so you can see at a glance. Nice work and 1 million thanks!

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• Satellite L510 - how to install the driver for wireless network card?

  Hello

  I recently bought Toshiba Satellite L510 laptop and problem in the installation of the wireless driver. I downloaded the driver from Toshiba sites.
  And installation get competed with success but it always ask for divers 'Network controller' and 'Askey for Toshiba.
  I'm trying different drivers of these last two days, but without success.

  Can someone Guild me please how to configure computer L510 laptop wireless. Also where can I get the drivers mentioned above.

  Thanks in advance.

  Hi mate,

  I m asking you to install the WLAN driver on your laptop computer purchased recently. Normally all the stuff is already preinstalled the operating system with all the drivers and tools. He s ready to use.

  However, what you mean exactly with her always ask for divers to Askey Toshiba network controller?

  Your wireless network card is listed in the Manager device correctly or yellow exclamation? What WLAN card you have?

• Acer Aspire 5315 drivers for wireless network does not

  This unit had top win7 and everything worked well. I reloaded Vista back and updated, all the drivers have shown as installed except for the wireless network, so I downloaded all the drivers of 3 of the website of Acer wireless network. Only the Atheros installed but still does not work, for the Atheros device ID is:
  PCI\VEN_168C & DEV_001C & SUBSYS_04281468 & REV_01

  The wired network connection works fine, but with the wireless, the pc icon double in the tray system, but not with the 'flowers' shows as when I connect the wired ethernet cable. The difference between when win7 was on this unit is as well the wireless connection and the dvd that worked perfect but now after reloading Vista, the Wireless does not work and the dvd also does not show as well, I had to install codecs to show him all. It's not logical, why win7 would work to perfection and not the vista which was what this unit came with?

  It's ok, I found the driver here:

  https://www.Atheros.cz/Atheros-wireless-download.php?chipset=22&system=3

  Thanks for your help.

• Cannot configure 7410 for wireless network

  I have a 7410 that I hooked up to a cable for several years but have just moved my office and need to set up a wireless network. Modem, router and computers are fine, but the printer does not have a wireless option, even if it is a wireless printer. I went to the help section and saw that I needed to hit the installer, 8 and 4, that is not problem, except in the network menu, I have only 1, 2 or 3.

  Does anyone know where is my 4 (wireless configuration)?

  Return to the Ethernet cable option - your Windows machine will complain of limited connectivity, but it's OK.

  Once your computer gets an IP address (it will be in the form 169.254.x.y), then open web page internal printer by accessing its IP address.  Select network, wireless (802.11) and then advanced.  Activate the wireless link and click on apply.

  If you do not find the wireless section of the 7410 internal web page, then your printer is ignored and is not a radio.

• My problem of password for wireless network card

  my wireless adapter is trying to connect to my network with an old password whenever I restart my laptop, how do I change the passrowd and ensuring that the installation program will be saved?

  Here you go:

  1. Control Panel
  2. Network and sharing Center
  3. Manage wireless networks
  4. Right-click on your home network, and remove it.
  5. Back to network and sharing Center
  6. To connect to a network
  7. Type your password when prompted
  8. Note this procedure for future reference.

• Cannot connect D110 for wireless network

  Hello

  I just bought the D110 all in one, but am having trouble connecting to my wireless network.

  Here is my network information:

  DSL with Verizon

  My router is a netgear rangemax wnr3500

  I use for my WPA - PSK [TKIP] safety + WPA2-PSK [AES].

  He can see my wireless network, but after that I put in the access code, it does not connect.  I also tried using the WPS method with no luck.  Help!

  I feel so stupid for this but I've checked the settings on my router again last night and the MAC address filtering enabled.  I must have forgotten that I turned it back at some point.  My fault.  Thanks for responding in any case.

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• Retrieve or change password for wireless network.

  Can't conect to my wireless network.

  You must contact the manufacturer and see if there is a way to reset the wireless device if you can enter a new user name and/or password.  They can also have other suggetions to resolve the situation.  This is the wireless device software and not Microsoft software, so we are not familiar with how it works (and you do not include the manufacturer, the brand and model of the device, so we could search to try to reach a recommendation if this was possible without contact with them).

  If this does not work, then I suggest uninstalling the software of the device wireless and then re - install again.  Who should clear the old password and give you a chance to enter a new during the installation and configuration process.  Make sure you know all the appropriate settings and note before you uninstall it (and make sure you have always access to the software or by recorded disc download, or the website of the manufacturer (ask them where to find it when you talk with them if you can't find it).)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP G72: connect my computer hp laptop for wireless network printer (4620 series all-in-one hp)

  I tried several times to connect to my printer wireless in the House and I always feel bogged down in technical language that is foreign to me. Questions asked, like URL, addresses and others and I don't have any idea where to find this info.

  I intend to try and install this printer one more time so mget the specific questions I need answers to, so bear with me please. Will be later.

  delnann

  While we're waiting to hear from you @7delnann7; Although I'm not sure of the question, you are experiencing or questions you have, I suggest running printing HP and Scan Doctor because this may require a very easy to use and useful.  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

• waiting for (wireless) network error in Windows xp

  IN my office network another laptop are connected with the same wireless router, but only my system does not connect with the radio... I also re - install the wireless driver, but the same error occurs. Please help me regarding this

  Hi Vishal,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• vista home premium upgrade drivers to support wpa/wpa2-psk for wireless network connection

  Implemented just a router Belkin Wireless home on Mac and intended to use a my laptop Toshiba (PC) via the wireless router wireless.  The PC has found the wireless connection and I am able to sign - on with the security key, however, is there no internet access.  After a phone call of support Belkin, I was told that my repressive operation, Vista Home Premium (on my PC), needs a driver update to support the security settings WPA/WPA2-PSK (which is how the Belkin router is set for more security, apparently).  How/where can I get this driver update?  Help, please?  Am about to throw computers out the window...

  You get the update appropriate for your device wireless to laptop Toshiba laptop model.

• can I connect HP Officejet 4500a - f for wireless network

  can I connect to my wireless HP Officejet HP 4500 a - f?

  LON

  HP Officejet 4500 desktop computer only provide a direct USB connection to a computer.

  You will find the connectivity section for model G510a contained in the specifications of the product below:

  http://support.HP.com/us-en/document/c01954185

  Shlomi