Protect and control the license for ASA with the power of fire

Similar Questions

• Capabilities with the right Protection and control of license

  Hi people,

  Just check that I understand the limits of a capabilities of clients with the power of fire with only the Protection/control.

  They will be

  1 / receive updates of poorly known ip addresses

  2 / receive updates for pre-treatment Snort rules - VDB files

  3 / be able to create manual URLS to perform a kind of Url rules in function

  4 / geolocation?

  They will not

  1 / have any possibility to send / receive file layout information

  2 / have any possibility to use Url categories

  3 / are free to set up rules to file based Malware

  Hi Evan,

  With a minimum of Protection and control, you can start the management of firepower. If the customer requires awareness of users according to a user with the license agent host Firesight will do as well as the Protection and control. You can create reports user based with the latter.

  Here's the URL and ports must be opened for the Firesight get necessary updates.

  SRU/VDB/Patch/all updates
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Here is the detailed information of the download server:

  Domain: support.sourcefire.com
  URL: https://support.sourcefire.com
  Port: 443/tcp (bidirectional)
  IP address: 50.19.123.95, 50.16.210.129

  Additional IP addresses that are also used by the support.sourcefire.com (in the method of Robin) are:

  54.221.210.248
  54.221.211.1
  54.221.212.60
  54.221.212.170
  54.221.212.241
  54.221.213.96
  54.221.213.209
  54.221.214.25
  54.221.214.81

  For amp
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...
  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/sourcefire-amp-applia...
  Using port 443 (bidirectional)
  Or Legacy port 32137 (out)

  For the URL filtering
  Access to the 'database.brightcloud.com' and 'service2.brightcloud.com '.
  the IP address is dynamic
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  For downloads of feed security intelligence:
  Access to intelligence.sourcefire.com
  The server uses the round robin scheme of IP address for the NLB, availability and fault tolerance. Therefore, IP addresses can change, and it is recommended that the firewall is configured with CNAME instead of an IP address.

  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  Kindly correct brand and rate if this helps.

  Concerning

  Jetsy

• What is the power of fire? is the hardware modules? is a software? is allowed?

  Dear all,

  I am newbie to firepower.

  My client uses ASA 5512-X WITHOUT firepower, they want to use something like function UTM.

  I have googled and find the firepower may be good choice.

  But I didn't not firepower is hardware modules? or software? or I have to buy an additional license?

  THX

  Hello team,

  You can integrate ASA with firepower. Firepower of the hardware and software modules are available. You can integrate the power of light software with ASA 5512.To module manage the fire power modules, you can use Firesight Center (virtual and hardware) management. To manage the power modules of fire, which you need a minimum of Protection and control of license and you need to buy separately to the Cisco team the global license.

  Here are some links for reference.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/5407/Relnotes/fi...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/firepower-mo...

  Rate and correct mark if the post will help you

  Concerning

  Jetsy

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• Installation of the power of fire

  Hey everybody

  I also ordered the firepower for my 5555-X and recived an SSD and a number of PAK.

  I think I heard somewhere that I need two 120SSD disks, I have one. Is this enough?

  And what is the correct order:

  1 stop/uninstall old IPS

  2. Insert the SSD

  3 reload

  4. install the power of fire

  Thanx

  J.

  5555-X is designed to be used with two SSDS in a RAID 1 array.

  It will work with one but will not have a RAID protection.

  (edit - corrected the Raid type to '1').

• licenses for ASA 5505, site-to-site vpn

  Hi, gang,

  I've not worked on ASA for a few years, so a little rusty on the issuance of licenses. my client has 5 locations, a few computers at each location. 4 tunnels vpn site-to-site will be implemented, so that 1 Server @ main location of accounting is accessible from other. simple configuration. I wonder if I have to purchase additional licenses? This is the part number of the device that I'm aiming for:

  ASA5505-BUN-K9
  Cisco ASA 5505 Adaptive Security Appliance 8 ports Fast Ethernet Switch with 10 user licenses

  Thank you!

  Jonathan

  Your license for the VPN is perfectly fine as the Base license supports 10 VPN-peers. The 10 user license is what could restrict more.

  And if the 5505 is not yet bought, go directly to the ASA 5506 - X as the 5505 is a legacy device and will probably go little EOS.

• Cisco ASA with the power of fire vs Cisco IPS Appliance

  Hello

  Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

  Thank you very much!

  Kind regards

  David

  Hello team,

  The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

  Rate of good will if this post helps you.

  Concerning
  Jetsy

• Should I buy licenses for PCs with pre-installed Windows?

  original title: licenses for W7

  I manage a small office and use SAP for SMEs. I have asked me to update of PC and I wonder if I need to purchase the Windos 7 license for 25 all PC, even if I buy today new PC with windows installed (home edition)

  Thanks for your contributions

  Hi Heinz von Appen,

  Thanks for asking! If I understand correctly, you want to know if you buy the license of Windows 7 If you buy Windows 7 pre installed.

  If you buy a PC with Windows 7 installed, it is not necessary to purchase a separate license.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• "Impossible to copy the name of the file: access is denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »

  I move the data because a Trojan horse snuck in.  I killed the Trojan horse by setting the drive as external and scanning.  However, I could no longer connect to the formerly infected drive. It hangs at the Welcome screen.  So I load XP Pro on another drive and set the old drive as external. I now see data, but get the "Access denied" message that will let me copy the data.

  Or I have to be able to release the data to the new drive or access the old disk by booting to XP.  Now I can't do either.

  I tried to get XP on the old drive, but the Trojan horse seems to have changed the password admin. I then tried to erase the password using a Linux boot disk and it showed the account unlocked, but I always block to the Welcome screen.

  Ideas appreciated.  I can't move forward until I can get the data off. THX K.

  Karen Girrl
  Thanks for posting with us.  The article below describes taking possession of folders\files.  You may need to go through these steps, if malicious software has modified the permissions on your old drive.
  http://support.Microsoft.com/kb/308421

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to buy 2 licenses for Photoshop with 1 Adobe ID?

  Is it possible to purchase 2 licenses of Photoshop using 1 Adobe ID? I just want to get for my business and I need Photoshop licenses for 2 of our designers.

  Thank you.

  Yes, this can be a resolution, you can also go the CC teams

  Concerning

  Stéphane