Protect S100 - bad image quality on an external display with Windows 7

Similar Questions

• Satellite L755D - Webcam: very bad image quality?

  Hello @all,

  I have a SAT. 755 (OS: win7 64 bit). The webcam returns a very bad image quality and I noticed that the driver is from the year 2006 (Microsoft, Version 6.1.760.17514).

  I installied the last 'pilot' vom site of Toshiba (version 2.0.0.19), which actually just updated the CAM software.

  It is a fact, that this webcam is of very poor quality, or could someone please help me improve the photos, which are not only in poor Skype, but also when I just test the cam.

  Greetings from the Austria
  erkg1959

  Hello

  Please check the film in front of the lens is detached.
  I think that many models is delivered with a protective film in front of the goal and it is not too easy to do.

  See you soon!

  Tom

• SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  My sony vaio SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  I have compained several times to sony, but they said that there is problem with windows 8 and this laptop model.

  I think that this response is not the solution to the problem, as it is my work that still hinder once. This laptop has with exmor HD webcam, so we expect the quality of the picture from the webcam to be strong, but it is dark, blurry, vary hard to identify someone even. It is even lower than some old VGA cam.

  Please provide a rigid solution.

  Hello krishna_18,

  The most common cause of this problem is a poorly lit room.  Please try to use the camera in well-lit areas.  Since there is no light or flash on the camera device, it is not able to work as well in dark situations.

  As to the answer before someone gave you "problem with Windows 8";  What they probably meant is that this laptop does not come with any software the camera included.  Therefore, the "Camera" app Windows 8 is what is natively provided and used.  This application is very limited in options and resolution.  Using an alternative app camera of your choice can also improve options, parameters, and results.

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error.

  Original title : A major problem with Windows Defender... will not run :(

  When I go to run Windows Defender, I get this message: MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  Then, after clicking OK, you get another small window saying "Windows Defender User Interface has stopped working... Search for an online solution and close the program (which does nothing) or close the program.    WHY?  McAfee scan says there is nothing wrong with the computer... There is something wrong. Impossible to get websites to find, or they are very slow.

  I have VISTA Home Basic edition, Emachine, bought 32 year THAT VISTA was released this January.

  That is to say 9 - seems to work better than 8 (which took awhile to do)

  SP2 is installed and I believe that most, if not all the updates are installed.

  Oh, and no matter what flash supported won't run... little is a nice way of saying. My flash player update. It is mess up until I had to update. :(

  Try the suggestion of Azam K.  If this help not to do the following:

  https://community.McAfee.com/message/208529

  McAfee should have disabled Windows Defender.  If not, or if you did turn back on, you must turn it off.  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off   Windows Defender cannot be uninstalled from the Vista OS, but can be disabled to avoid conflict with other programs.

  You will probably need to uninstall Flash and reinstall it: http://www.adobe.com/support/flashplayer/

  I don't really like to make a negative comment on an anti-malware program, but McAfee has a reputation for sometimes bogged down operating systems.  If your problem persists, you will need to uninstall McAfee (to include using the McAfee removal tool) and see if that has any impact on your computer problems.  If there is an improvement, you may consider trying another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Toshiba Camileo Pro HD - bad image quality camcorder

  I recently bought a toshiba camileo pro hd camcorder due to its size and 720 hd quality.

  I connected through my wlt toshiba tv via the component cable, but the picture quality is bad. It seems very grainy. I thought it was the connection, but these have been checked and were perfect.

  IM pretty impressed if this is how it will run even if it was valuable.

  I'm doing something wrong?

  Cheers for all the advice

  Hello

  If you image quality is bad check details in the menu setting by choosing the right standard of TV (try PAL and NTSC as an alternative).

  And if the LCD screen image is unclear when shooting, try to turn the ring to 'Focus' on the circumference of the lens on the proper position: (general/Figure/Macro)

  Good bye

• IdeaPad Yoga 13 - HDMI of bad image quality on the TV 1080 p screen?

  Hi people, I have recently connected my Yoga via HDMI to my TV Samsung 40 ". Unfortunately, the image quality does not as good as my old T61 via VGA hooked up to my TV. Image via HDMI on my TV has some sort of "shadows" around the edges at all. I use a HDMI Basics Amazon cable that is capable of 3D and Ethernet over HDMI - I think this cable should be ok.

  Did it someone else faced with problems with the picture quality of the Yoga on a TV via HDMI before?

  Just for completeness: it was my TV sharpness settings. I had to turn off completely disable the artifacts.

• rMbp mid-2014, external display with the quality of the retina

  Hello!

  I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.

  http://www1.euro.Dell.com/content/products/ProductDetails.aspx/Dell-u2515h-monit or? c = en & l = en & s = dhs & cs = frdhs1

  I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)

  The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.

  I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...

  More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?

  My budget is 450-€500

  Thank you

  The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.

  Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• SysFader: WinMail.exe Error Message - bad Image can not navigate Web sites from windows mail

  When you connect in Windows Mail, I get an error message (C:\Windows\system32\msimtf.dll). What needs to be done to solve this problem?

  Hello

  Try to perform the SFC scan on the computer and check.
  Reference: http://support.microsoft.com/kb/929833

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/bad-image-error-from-winrnrdll-in-windows-mail/8d80da30-bb3d-47c2-9b5e-a88a0f6d4e0d

• Can I use an iMAc as an external display for Windows laptop?

  I will be working from home for some time and have received an old laptop Lenovo. The screen is quite small. Is it possible to use my iMac 21.5 "fairly new as an external display for your laptop?

  Thank you

  Kyle

  Sorry to be the bearer of bad news, but this is not supported. The feature you're talking about is called target Display Mode, Apple is extremely clear on what systems are supported in use your iMac as a display with the target - Apple Support Display Mode.

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• Using the external display with Satellite A100-PSAA9

  I have a problem when I connect to an external monitor of 2º, it connect but next it disconect, it's always the connection and disconecting. I did update the bios and the display driver, but I still have the same problem, what can I do?

  My operating system is windows vista.

  What do you exactly mean with disconnection and connection?
  The switch to internal and external display or the display on the external monitor will simply disabled.

  Have you checked the connection to the laptop computers monitor port?

• Error: Function of ms - dos invalid when copying on external drive with Windows 7

  FUNCTION OF MS BACK INVALID WHEN PLAYBACK EXTERNAL DRIVE WITH WIN 7

  Hello

  1. you try to save a data of the C drive on an external hard drive using the Windows backup feature?

  2 does this problem occur when you try to copy / paste normally?
  3. What is the accurate and complete error message?

  If you try to copy and paste the data manually, then try the fix to resolve the problem:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• Bad image quality of interactive PDF

  Help!

  A logo that is placed in InDesign and exported as an interactive PDF does not appear correctly.

  The customer says it is damaged on your laptop. Some letters in the logo seem more than others and some seem thicker.

  It is a vector file of RGB. I tried, eps, pdf, png, jpeg. I redesigned the letters. I copied and pasted into another document. I reduced the extent of it. I've copied from illustrator directly in Indesign.

  I changed the management of image compression, JPEG quality and resolution in the export to interactive PDF settings.

  I don't know what else to try.

  The customer declares to 200% the logo seems ok in acrobat, but full screen, the problem returns.

  Help, please!

  The version I.

  Open the logo and care than I and L are not replaced by a single line. Add one or two anchor points in straight lines.

  L and I are often converted in PDF export in simple lines instead of rectangles, because it saves space, but it allows the bolder appearance on screen.