Protection of execution date guard prevents me reading emails in hotmail.

Similar Questions

• Protection Mode change Data Guard.

  Experts,
  
  Ask your entries on the Data Guard protection mode change, below, is our environment:
  
  BECAUSE with two nodes: primary
  Single stand-alone Server DB: Eve
  Apply real-time: enabled
  
  For the primary and Standby databases, it's protection guard data display "Maximum Performance" mode. According to our needs, we would go for "maximum availability". I can go ahead and change, however I have questions in mind before making the change.
  
  1. do I need to change the protection on both primary & standby mode?
  2. do on DB primary change automatically the standby mode too?
  3. If the answer is NO to the 2nd question, I need to change the mode of protection to standby also? In the otherwise, primary and Standby will be run in two different modes.
  
  Please let us know of your entries.
  
  Thank you

  Crazy.

  I'm really happy that it works. Only ORA-16198 has very little information about it.

  And its raining in the North tonight so I have to escape before it turns me on.

  Best regards

  mseberg

  Subsequently

  Is equivalent to checking. Hoping no news is good news.

  I've seen this thing before restarting. Last weekend was indeed an Oracle 10 bark at me during the installation of the entire network has been good. Another error, but I finally tried the same thing and it worked also. No complete sense to me, you would think that the listener would govern. And then it takes the real is what's real.

  MS

  Published by: mseberg on December 14, 2011 18:47

• Type of protection for Acrive Data Guard

  Hi all
  
  I'm looking to implement a solution of active data guard 11 G R2 and must be live reporting of the database physical sleep.
  
  I need to confirm the mode of protection I need. (I think it's maximum Protection).
  
  Thank you very much
  
  VICC

  NOT CORRECT (see below in the thread)
  11 g, you can use real-time Query (DataGuard Active) with a MAXIMUM PERFORMANCE and a MAXIMUM AVAILABILITY

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

  Published by: Uwe Hesse on 27.01.2011 12:55

• Protection of execution date close my email. Any ideas?

  What happened a couple of times.  No idea what to run to determine whether my computer is at risk.  Any ideas would be useful.

  Hello

  1. What email service do you use?
  2. You use an email based on the web or an e-mail client?
   
  DEP is a security feature that can help prevent damage to your computer from viruses and other security threats. DEP can help protect your computer by analyzing the programs to ensure that they use the system safely memory. If a program tries to run code from memory in an incorrect way, DEP closes the program.
   
  Run Microsoft security analysis and check if the problem persists.
  Microsoft safety scanner.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  You can also run the malicious software removal tool. Check out the link:
  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
   
  Note: As a precaution, backup important data that is on your computer prior to running the scans.
  For more information, please see the link.
  
  Data Execution Prevention: Frequently asked questions
  http://Windows.Microsoft.com/is-is/Windows-Vista/data-execution-prevention-frequently-asked-questions

• Refresh the MV of standby Active Data Guard

  Is it possible to refresh a materialized view (quick or full) come from a standby database Active Data Guard open in read mode only w/apply?  Or can I just do the update of the primary?

  Hello mseberg,

  You made a very good point about the definition of a database of the READER.

  After you have answered, I found in MOS: create a distributed materialized view based on a master table on a database in read-only (Doc ID 276023.1)

  This explains that it is NOT possible to make a fast refresh of a database shall RO.  However, it *peut* be possible to do a complete refresh of a standby Number.  It depends on the query used to define the MV.  If the RDBMS Analyzer determines the MV is *able* to fast refresh (even if there may not need it right now), so you can't do a full refresh since the eve of the RO.  If the parser determines that the request is NOT able to fast refresh, then you can do a full refresh since the eve of the RO.  I tested this script on 11.2.0.3.8 and found to be true:

  CREATE THE MIMI MATERIALIZED VIEW. MV_TEST

  TABLESPACE USERS

  IMMEDIATE CONSTRUCTION

  COMPLETE REFRESH

  AS (SELECT * FROM TEST@MIMI_ROSTBY);

  ORA-16000: database opened for read-only access

  ORA-06512: at "SYS." DBMS_SNAPSHOT_UTL', line 364

  ORA-06512: at "SYS." DBMS_SNAPSHOT_UTL', line 446

  ORA-06512: at line 1

  Now, I've changed the MV query to use a 'one time' feature (ROWNUM), which causes the query become complex (not able to fast refresh).  I can now create a MV on the day before RO, because the query is no longer able to fast refresh and requires no registration on the eve of the RO:

  CREATE THE MIMI MATERIALIZED VIEW. MV_TEST

  TABLESPACE USERS

  IMMEDIATE CONSTRUCTION

  COMPLETE REFRESH

  AS (SELECT * FROM TEST@MIMI_ROSTBY WHERE ROWNUM > 0);

  Created.

• Data Execution Prevention preventing Adobe Reader to install.

  Data EThe Data Execution Prevention preventing Adobe Reader to install. Other programs work very well. Tried to list in acceptable programs, but it will not. I cannot now read PDF documents. Help, please. Fredxecution prevention preventing Adobe Reader to install. Other programs work very well. Tried to list in acceptable programs, but it will not. I cannot now read PDF documents. Help, please. FredIdeas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Here is the procedure to disable DEP in Vista: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html.  Make sure that you are logged on as administrator.  Reboot after disabling.  Retry the installation of Adobe.  If it works, turn on DEP and restart to replace the protection of your system.

  Download another copy of Adobe of their Web site - the one you have is maybe damaged.

  When you install Adobe, do a right-click on the installation icon and click on run as Administrator - this it sometimes helps better work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MCAFEE UPDATE LAUNCHER has been closed. To help protect your computer, Data Execution Prevention has closed

  MCAFFE UPDATE LAUNCHER has been closed. To protect your computer Data Execution Prevention has closed McAfee update Launcher. A proglem caused this application to stop working correctly. What should I do? I'm not savvy in computer science. Thank you.

  Hello

  1. Once you get this error code or error message?

  2 have you made changes on the computer before this problem?

  3 - is the problem confined to the McAfee update Launcher?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and check if the problem persists.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try to uninstall McAfee using the removal tool, and then reinstall and check.

  Consult this link for uninstall McAfee of McAfee:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Hope the information is useful.

• Reader only a physical standby Clock Data Guard?

  Hi all

  We try to use TimesTen 11.2.2.4.1 as a memory cache read-only for a 11.2.3.0.7 on Linus RedHat 6.3 Oracle schema, all using Oracle Data Guard to replicate the Oracle instance through geographically remote sites. At each site, we would like to have two instances of TT, synchronization with the local instance of Oracle 11 g. It works very well against the master DB, but TT agents will be able to synchronize against physical standby instances?

  The problem, seems, is that the agent of TT uses structures dedicated in the master Oracle (related to the grid of cache), instance that will be replicated to instances of Eve. Is TT agent able to use the read-only, structures to complete replication synchronization, or is this unworkable approach? What would be your advisor as a way to do this?

  Thanks for your help,

  Chris

  No, I'm afraid that will not work and is not supported. We support the use of groups of READONLY and AWT cache in collaboration with Data Guard in the following configuration (documented in the Guide of Cache TimesTen IMDB):

  1 data Guard is configured as synchronous physical standby

  2. all the caches of TT run against Oracle DB

  3. in the event of a failover of Data Guard, TT hiding can be migrated to run against the DB who now has beed promoted active to standby

  It is the only supported configuration.

  Kind regards

  Chris

• Active data guard lost synchronization

  Hi guys,.

  I hope you can give me some advice.

  I have a BD PRIMARY in a server and a STANDBY in another server.

  I do not configure these databases and I don't have too much experience with data protection.

  The problem is that the STAND BY lost the sincronization. I just watched a few views on the database and I found that the media database is READ only, so I think that is an Active Data Guard.

  -PRIMARY:

  SQL > SELECT name, State, database_role, open_mode connections, log_mode FROM v$ instance, v$ database;

  STATUS DATABASE_ROLE LOG_MODE CONNECTIONS

  --------- ---------------- -------------------- ------------

  BD PRIMARY READ WRITE ARCHIVELOG

  -STANDBY TIME:

  SQL > SELECT name, State, database_role, open_mode connections, log_mode FROM v$ instance, v$ database;

  STATUS DATABASE_ROLE LOG_MODE CONNECTIONS

  --------- ---------------- -------------------- ------------

  PHYSICAL STANDBY BD READ ONLY WITH APPLY ARCHIVELOG

  
  

  -PRIMARY:

  "SQL > select SEQUENCE #, FIRST_TIME NEXT_TIME, APPLIED, ARCHIVES of V$ ARCHIVED_LOG, whose name = ' STANDBY' FIRST_TIME agenda;

  
  

  SEQUENCE # FIRST_TI ARC APPLIED NEXT_TIM

  ---------- -------- -------- --------- ---

  56 18/03/15-18/03/15 NO YES

  57 18/03/15-18/03/15 NO YES

  58 18/03/15-18/03/15 NO YES

  59 18/03/15 03/19/15 NO YES

  60 19/03/15 03/19/15 NO YES

  61 19/03/15 03/20/15 NO YES

  ...

  426 13/05/15 13/05/15 NO YES

  427 13/05/15 13/05/15 NO YES

  428 13/05/15 13/05/15 NO YES

  429 13/05/15 05/14/15 NO YES

  430 14/05/15 05/15/15 NO YES

  I saw the newspaper archive all copy them correctly on the standby server, but they apply. I don't know why.

  How can I get the two database will be synchronized? What option I have?

  Best regards...

  Hello, you should check if Fal_server and Fal_client settings are configured in the main bodies and relief.

  In the standby instance fal_server must point to name PRIMARY, as it appears in tnsnames.ora

  fal_client must point in standby mode, as it appears in tnsnames.ora

  In the first instance, fal_server must point to the name of Eve, as it appears in tnsnames.ora, fal_client pointing to primary name, as it appears in tnsnames.ora

  on the other hand, you must restore the automatic sequence 33-55 on the backend and fal then transport and then primary eve because of the resolution of the gap.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14239/log_transport.htm#i1268281

• Database is configured for Data Guard

  I'm lance a UTF8 conversion on a development database, which has been cloned from Data Guard. There is a warning in the Migration status: "database is configured for Data Guard" which is looking at DMU to determine this? The database is opened in read-write mode and it behaves like a primary database (I have the MISP scanner and run updates to address representations not valid). I would like to know what I need to update the settings.

  This prevent me to convert tables using DEC? When I try to select this option for all tables I get the message, "CDS does not support conversion method"Copy data using CREATE TABLE AS SELECT"for tables that are involved in a process like capture Oracle Streams, or apply.". Another method of conversion available for the table.

  Thank you

  Ben

  CDS checks if the DG_BROKER_START parameter is set to true.

  The problem with the ETG is independent of the Data Guard. The CDS is true for tables which:

  -are asynchronous stream capture source, or

  -update conflict managers have, or

  -DML managers have, or

  -conflict resolution settings have

  The above tables are considered to be configured for Oracle Streams and are not supported by the method of conversion of DEC. This is because the DEC method creates a copy converted the table and falls from the original. The CDS is not able to move the configuration information from the old table to the new flow.

  Thank you

  Sergiusz

• Purge logs archiving on things primary and Standby and for Data Guard RMAN

  
  Hi, I saw a couple of orders in regard to the purge archive records in a Data Guard configuration.

  Set UP the STRATEGY of SUPPRESSION of ARCHIVE to SHIPPED to All RELIEF;

  Set UP the STRATEGY of ARCHIVELOG DELETION to APPLIED on All RELIEF;

  Q1. The above only removes logs archiving to the primary or primary and Standby?

  Q2. If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  I also saw

  CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED;

  Q3. That what precedes, and once again it is something that you re primary side?

  I saw the following advice in the manual of Concepts of data protection & Admin

  Configure the DB_UNIQUE_NAME in RMAN for each database (primary and Standby) so RMAN can connect remotely to him

  Q4. Why would I want my primary ro connect to the RMAN Repository (I use the local control file) of the standby? (is this for me to say define RMAN configuration settings in the Standby) manual

  Q5. Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Q6. If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Q7. Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Q8. What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  Any idea greatly appreciated,

  Jim

  The above only removes logs archiving to the primary or primary and Standby?

  When CONFIGURE you a deletion policy, the configuration applies to all destinations archive

  including the flash recovery area. BACKUP - ENTRY DELETE and DELETE - ARCHIVELOG obey this configuration, like the flash recovery area.

  You can also CONFIGURE an archived redo log political suppression that newspapers are eligible for deletion only after being applied to or transferred to database backup destinations.

  If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  Its a configuration, it will not erase by itself.

  If you want to use FRA for the automatic removal of the archivelogs on a database of physical before you do this:

  1. make sure that DB_RECOVERY_FILE_DEST is set to FRA - view parameter DB_RECOVERY_FILE_DEST - and - setting DB_RECOVERY_FILE_DEST_SIZE

  2. do you have political RMAN primary and Standby set - CONFIGURE ARCHIVELOG DELETION POLICY to APPLY ON ALL STANDBY;

  If you want to keep archives more you can control how long keep logs by adjusting the size of the FRA

  Great example:

  http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html

  All Oracle is worth a peek here:

  http://emrebaransel.blogspot.com/

  That what precedes, and once again it is something that you re primary side?

  I would never use it. I always had it put it this way:

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;

  I would use only 'BACKED UP' for the data protection system. Usually it tell oracle how many times to back up before removing.

  Why would I want my primary ro connect to the RMAN Repository?

  Because if you break down, you want to be able to backup there, too.

  Also if it remains idle for awhile you want.

  Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Always use a database of catalog RMAN with Data Guard.

  If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Same answer as 5, use a catalog database.

  Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Same answer as 5, use a catalog database.

  What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  I think cron is still, but they all work. I like cron because the database has a problem at work always reports its results.

  Best regards

  mseberg

  Summary

  Always use a database with RMAN catalog.

  Always use CRF with RMAN.

  Always set the deletion «To APPLY ON ALL STANDBY» policy

  DB_RECOVERY_FILE_DEST_SIZE determines how long to keep the archives with this configuration.

  Post edited by: mseberg

• Data Guard Vs Golden Gate

  Hello
  
  I have custody-transfer data disaster and now my planning to do more to implement the Golden Gate. My question is when you can protect your data and active pressure on the primary database using the Data Guard why someone should go to golden gate?
  
  Please let us know of your experience of Golden Gate on Data guard!
  
  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  I have data-guard for disaster recovery and now my management planning to do more like implement Golden gate. My question is when you can protect your data and offload pressure on primary database by maintaining active data-guard why someone need to go for golden gate?? 
  
  Please share your experience for using Golden Gate over Data guard!!
  

  Refer to this http://www.oracle.com/technetwork/database/features/availability/dataguardgoldengate-096557.html
  Can be useful

  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  Active Dataguard is a device in which the database pending would be placed in open read-only mode and recovery (MRP/application log) would be ongoing. This is called as active dataguard and the wait would be in sync with the primary. The standby database when kept in open read-only mode can be used for purposes execute select queries. So, you would be having a function of the use of the database as a database, and at the same time the day before would apply the primary newspapers. This feature is available only from 11 g.

  In 10g or earlier versions, we had no such device. The database of rescue, if necessary use for reporting purposes, then the backup database must be open in read-only mode, but the recovery (MRP/application log) cannot be done. So, if you want that database waiting to have the application of fact log, then he must place in EDITING mode. If it will be used for the purposes of tax, then it must be placed in open READ ONLY mode and stop the recovery. Guests receive only 1 device at a time here.

• How to Setup Data Guard with alter tablespace... begin backup approach

  Hello!
  
  I am writing this compilation of documents in a guard daata establishing in 10g. I was in charge to present different approaches in implementing on Rhel 5.
  
  I came across 3 procedures (which is to duplicate a database with RMAN, then configure it to a Data Guard feature). I read a process using (let's this is what the article said, but procedure was presented):
  
  alter tablespace... .begin backup;
  alter tablespace... .end backup;
  
  then copy the generated files and configure it to the data protection feature.
  
  Someone help it with that? Is there like a blogsite or steps I can take for this scenario?

  Hello;

  The best I found was: (and its same 10 Oracle! and not RMAN.)

  http://sites.Google.com/site/catchdba/physical-standby-database-using-HOTBackup

  There, an old link here on this topic:

  DataGuard configuration using hot backup files

  Hard to find much on this topic as "Hot Backup" almost always comes to RMAN.

  This collection of notes can also help:

  DataGuard knowledge browser Product Page [ID 267955.1]

  And the "Formidable" Powerpoint:

  www.dbspecialists.com/files/presentations/standbydb.ppt

  Seems that this method is dead somewhere between Oracle 8 and Oracle 9

  Best regards

  mseberg

  Published by: mseberg on March 16, 2012 20:31

• 11g R2 RAC OneNode vs Active Data Guard

  Hello
  
  I just read on the new Oracle RAC one node but ddont get the difference to the active data guard.
  
  "RAC OneNode offers another possibility: an additional way to fight against the consolidation with one instance of RAC running on a node in a cluster." Oracle calls its strategy a "Maximum Availability Architecture" - when a customer adds redundancy, the database can use it for additional performance. Active Data Guard allows customers to move backup and redundant reports to the machines. "
  
  Source: http://www.b-eye-network.com/blogs/adrian/archives/2009/11/
  
  maximum availability architecture, is not the custodian of data?
  
  concerning
  metalray

  >
  Is it scalability... only. Apart from this. A blog has been linked that says 'Extended RAC'.
  Why should I use RAC for the filesystem of database if they are on a San in any case - assuming the SAN extends to different places? It seems to be that a good SAN makes the idea of 'Extended RAC' a bit useless.
  >

  If you already have a San that "extends to different places", you have protection against disaster with that if you put your data files on it, this is true even for a single instance respectively a one RAC node configuration.

  In both cases, you only have a single instance active - in other words, a single server can be used to service your needs of the user. With a true - in this case 'Extended' CARS, you can have multiple servers at the same time access to your data that is stretched across your San as your needs of the service user.

  In short: If you want to have the only disaster protection, you are served already with your stretched SAN - as long as it extends to a large enough distance.

  An extended RAC is not useless, however, because the cab is more than high availability.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Using Oracle 11 g Data Guard disaster recovery

  Hi, can anyone answer if Oracle 11 g Data Guard by itself provides an option for making/switch between the main bases and emergency (back and forth) disaster and as a restoration solution, seamlessly? Here's the scenario:

  1. two databases (active and reserve)

  2 put it to sleep (make primary with read/write)

  3. restore to the original database

  Data Guard has two transitions of role... Failover and the digital switchover.

  Passage to the fact exactly what you describe. You can switch to standby and vice versa. However, this will not work unless the primary and the standby are available. If you will not be able to perform an operation of swichover when you have a failure in the main data center that makes the primary db not available.

  Failover will be the day before in a primary for the moments where the primary origin is not available. Unlike the digital switchover, failover is one-way. There is no 'restoration' of failover. If you do not failover, then once the old Center of main data is operational again and you can get the former primary database up, you must restore from the first news and make a watch for the first new. At this point, you can then make a pass to come back and run in the original data center.

  HTH,

  Brian