prototype of the project file information

Similar Questions

• By mistake I deleted an email that I had saved in the project file. Can I recover it or find it?

  Original title: recovery by mistake deleted messages project

  By mistake I deleted an email that I had saved in the project file. Can I recover it or find it?

  Hi Robert,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. which web e-mail or mail client you are referring to? What is Microsoft Outlook or Hotmail?

  3. who is the provider of mail service?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If you are referring to Outlook, then you can email deleted restore deleted folder by following the steps in the link below:

  He must restore e-mails deleted in Outlook.com.

  http://Windows.Microsoft.com/en-us/Windows/Outlook/recover-deleted-messages

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• How to find the path to the project file programmatically

  I'm trying to find a way to get the path to the project file in the development environment.

  I have attached a small project in LV 8.5.1 with a project file, a library file and the VI. I can get the path to the file library, but not to the project. This channel is still .

  I know that the problem exists in LV 8.6.1f1 but I didn't test in LV 2009.

  I am aware that in reality he could there have more nested levels of the library files, but it doesn't matter when this simple example does not work.

  If this is related to the problem I initially created the library by using the file > new... and later, I created the project and added to the library.

  Hi Waldemar,

  Here is a small piece of code and a related link.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=220269&requireLogin=false

  I hope this helps.

  Kind regards

  N. Ralf

  Engineering applications

  OR Germany

  PS: Don't forget the congratulations. )))))

• BlackBerry smartphones can not erase the music file information

  I have a problem loading music on my 8830.  I have a 4 GB memory card, but I can't figure out how to erase the music I deleted.

  Cancel the request.  I could restart the BB and delete the old file information.  Found a few old son who had the same problem.

• Emails sent to the project file of their own.

  My emails are automatically saved in the project file while I'm still forming.  I'm so not able to edit my e-mails, unless I go back and erase everything between the error and everywhere where I am in the e-mail when I noticed the error.  It is extremely time consuming.

  What is the trick to fix this?

  SC

  A lot of problems is resolved in the new e-mail application, but you must update your platform to use.  Open the app Store and touch / click on the button "Get Windows 8.1 update".

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• Lack an external SWF in the projection file... help appreciated.

  I created a press kit in Flash Catalyst that contains an mp3 player in the form of a SWF file. When I publish the catalyst project (run locally and deploy-to-web) mp3 player works perfectly. When I opened it the Main.swf in Flash Player, it works perfectly. When I create a file of projection (from Flash Player) the external swf (mp3 player) is missing.

  Any help on this would be greatly appreciated.

  Mick

  Flash Catalyst does not incorporate the .swf file, then it must be present as well as your projection file in order to function properly.

  Try to place the projection file in the local copy of race and see if she works there. If this is the case, make sure that you copy the current folder wherever you place the final projection file.

  -Bear

• How can I remove a letter from project in the project file?

  Of course, it's simple, but it's the first time I had a draft letter in my project file and I can't remove it to clear the file.

  I just select it and press DELETE, but I guess you have already done this.

• Delete the project file

  How can I delete a file from a project?

  Thank you in advance,

  Marco

  Select the file in the project window, click the tab of the selected item that appears on the Ribbon, and then click on remove.

• Open the project file in signalExpress

  Hi all

  When I tried to open an existing project file SignalExpress copied from another laptop on my laptop, I got the following error message:

  Versions of the components installed are not compatible with the version of LabVIEW SignalExpress. Please install the latest version of the following:

  (1) LabVIEW SignalExpress shared tools

  I couldn't find this tools shared on the site of NOR. Any suggestions?

  My signalExpress version is 3.0.0.

  Thank you very much.

  Cong.

  Hi Cong,

  Depending on the version of the Signal Express program was written, you may need to upgrade your version. Here is a link to all the explicit downloads of the signal available on our Web site.

• Import previously created the project file as. MSWMM files will now open in WMM.

  After you import a video file multimedia. While displaying the file in WMM I was bursting of the file in the headings concerned by creating several files in my imported originl file. I had more before edit I would do later, he not published at this time. I saved the file as a project using the default value. MSWMM format. When I try to recover the project I get the following message:
  Split F:\Video\Editing videos\tape2 file. MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  Double click on the file to open WMM but does not load the file.

  Windows Vista
  Windows Movie Maker V6 Bld 6002 SP 2

  Can you help me please?

  Hi John, sorry I couldn't you respond without creating another user ID.
  There are no files listed in WMM when I double click the. MSWMM project file I want to edit further. There is a brief display in the video box 'Preview size 434 x 326'.
  There is nothing on the screen at all, if I then try to open the same file again, I get a response that the file is in use to choose file anther
  I use the same computer to download and edit my videos, not switching files either, other than my project and video files. MSWMM files are stored on an external hard drive.

  Thank you for your interest

  ===============================================
  I'm really grabbing at straws here because I have no idea what happened
  but there is always the original source files in the same exact place as
  they were when you created the project?

  I wonder if it may be interesting to try to copy your source files of your
  system drive (C :)... then again the project and save it (C :).)

  Sorry I don't have a more positive response.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Objects in different layers has changed position when I open the project file, why? Can I remedy in a fast way and not painful?

  Im making an animation frame-by-frame and today when I opened my objects of som of the project had changed position while others do not. This countinues throughout the chronology and sometimes they change position.

  Here's before:

  

  Here is after:

  

  I think it has something to do with me changing the size of the documents. But it didn't happen yesterday when I made the change, just today when I opened the file again, and I can't change it back and make things right.

  If anyone knows what happened and if I can fix it, it would mean a LOT to me.

  There are really no way around to back up your files regularly.

  Flash is unfortunately not the most stable program.

  Make it a habit to save a new version every half hour, or so, which will limit your losses.

  Think of it as a "warning shot" and consider yourself lucky that you have not the famous "flash could not open the file" message ;-)

• How to have projectname_edge.js in a subfolder? (not in the same folder as the project file)

  Hello,

  Is it possible to have the file ProjectName _edge.js in a subfolder? N ot in the even record with ProjectName .html.

  It seems that edge.5.0.1.min.js looking for dependencies in the same place as the main file in the project. Moving projectname_edge.js to another folder (jsscript, etc.) causes the animation only to run. I can store the in the different folder? I want to put in the 'Content' or 'Scripts' folder on the server.

  
  

  I try to incorporate animations of edge in an ASP.NET MVC application, and I have no any file index.html. I am inserting the <!-runtimes Adobe Edge-> section in the view (the . ) cshtml file stored in subfolder ). Have the projectname_edge.js in the path of the main server need to deal with security settings, so I put in "Scripts".

  
  

  I found the video showing the solution for the old API: http://www.edgedocks.com/content/edge-animate-publish-files-and-js-folder but it is not more valid with edge 5.0 API

  
  

  Any ideas how?

  
  

  Thanks in advance!

  Eric

  
  

  
  

  Yes, you can do this by using the htmlRoot parameter. Suppose you put this file within the "script" folder, so you must add an optional parameter manually in the script inside the page .html as tag below:

  HTH,

  Vivekuma