Provided to the customer VPN encryption
Hello world
You must confirm if the PC user used RA of Cisco VPN to connect to the network of corp.
Here IPSEC tunnel that is being built between the PC and router VPN encryption is provided by the Client VPN software to the right user data?
Concerning
Mahesh
Remote access VPN clients negotiate the encryption based on the settings in the head of ASA line (or whatever the device puts an end to the corporate VPN remote access). It may be a SSL or IPSec method with other different parameters according to the configuration settings.
Once a VPN session is established, the client software encapsulates the traffic goes the end head and decapsulating the received data using the negotiated parameters. The head of line did the same thing.
Sent by Cisco Support technique iPad App
Tags: Cisco Security
Similar Questions
-
Hello
I ran through the Wizzard VPN on Pix Device Manager but I would like to know how to check my connections are given of sailors and passage.
Jason
Jason,
You can use the sh command his isa crypto and crypto ips HS her.
SH crypto isa his will tell you who threw a connection and what state it is.
SH ips crypto her will allow you to see packets encrypted and unencrypted packets and the amount of data has been transmitted through your vpn tunnel.
Patrick
-
Can the customer vpn to pix interface unprotected to a protected interface
I have a pix multi-interface, the description of the interface is as follows:
Outside-> 10MB to ISP
Inside-> vlan main
DMZ-> Web servers, etc...
Lab1-> test application servers
LAB2-> test application servers
etc...
Comments wireless-> free wireless (connected to the Cisco WAP)
The open wireless only has access to the internet, not one of the reliable networks. It is an untrusted interface (security lvl 1). The external interface is security 0.
I want to be able to allow vpn access from the wireless in networks of trust like vpn from outside (internet) is processed.
I guess that the pix sees a vpn connection attempt to another of its interfaces.
The client times out connecting since the wireless for the pix outside IP interface.
The pix records simply this:
January 20, 2009 13:38:23: % 7-710005-PIX: UDP request and eliminated from 192.168.20.5/1346 to GuestWireless:yy.yy.yy.yy/500
the external interface IP = yy.yy.yy.yy
the pix is also the dhcp server for wireless network connections.
Is it still possible? If so, what Miss me?
Thank you
Dave
To answer: -.
The leg wireless of the PIX is the security level 1, and the external interface is the security level 0. That would not mean that vpn is launched from a higher to a lower security interface? Yes but the traffic is clear--asked to terminate a VPN connection to an interface that is locally attached to the PIX effectivly in the inside of the unit. Sure that PIX will refuse the connection he received on the external interface of the interface without comment thread.
No it isn't the same thing, something like: -.
crypto ISAKMP enable GuestWireless - this indicates the PIX to listen and accept connections VPN ISAKMP/issues of ANY device connected to this interface FOR the GuestWireless interface.
HTH >
-
PIX501 customer VPN - cannot access inside the network with VPN Session
What follows is based on the config on the attached link:
PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC
We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.
Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!
We have the same problem with the customer 4.0.3(c)
Thanks in advance for any help!
=======================================
AKCPIX00 # sh run
: Saved
:
6.2 (3) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
hostname AKCPIX00
domain.com domain name
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
fixup protocol sip udp 5060
names of
access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
external IP address #. #. #. # 255.255.240.0
IP address inside 192.168.1.5 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool akcpool 10.0.0.1 - 10.0.0.10
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address akcpool pool akcgroup
vpngroup dns 192.168.1.10 Server akcgroup
vpngroup akcgroup by default-domain domain.com
vpngroup split tunnel 101 akcgroup
vpngroup idle 1800 akcgroup-time
vpngroup password akcgroup *.
vpngroup idle 1800 akc-time
Telnet timeout 5
SSH #. #. #. # 255.255.255.255 outside
SSH timeout 15
dhcpd address 192.168.1.100 - 192.168.1.130 inside
dhcpd dns 192.168.1.10
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
Terminal width 80
Cryptochecksum:XXXXX
: end
AKCPIX00 #.
Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:
mymap outside crypto map interface
ISAKMP allows outside
Enter these two commands should be enough to reset the ipsec and isakmp.
-
Is it possible to create and save a custom provider for the corporate accounts?
Because it seems that those available (bbm, twitter, facebook, bbgroups, linkedin and sinaweibo) are provided by Blackberry.
If this is not the case, what is the concept of recommending to integrate 3rd party accounts?
Welcome on the support forums.
You can integrate an application into the hub and share the menu.
you might take a look at Vincent for a twitter client which has done this successfully.Full integration of account is unfortunately not available at this time.
-
is eazy customer vpn is supported only on the routers of the 800 pix 7.0 series iOS
I'm eazy vpn with pix 7.0.4 ios with a 3640 router. the 3640 router is like aeazy vpn client. and the pix as the eazy vpn server. the client connect and continues to ask the xauth parameter. I read in the release notes that requires this vpn eay 12.2 and especially sure ios for 806 routers. the pix also does support eaxy customer vpn routers fo 800 series only. urgent help required. If this true pix sucks big time. they force us to buy routers.they become like microsoft. pls help
Assane
According to this document
http://www.Cisco.com/en/us/products/sw/secursw/ps5299/index.html
Cisco Easy VPN remote is now available on Cisco 800, 1700, 1800, 2800, 3800 and series UBR900 routers, Cisco PIX 501 security equipment and 506th and Cisco VPN 3002 hardware Clients.
So no support to 3640...
M.
Hope that helps if it is
-
VPN established but the customer can not access the internet... Need help.
Hi all
I'm trying to get a functional ASA 5505 appliance but does not always succeed. I managed to get connected to the ASA VPN client, but once connected, vpn client cannot access the internet. I am trying to route traffic from the client to the VPN server so I don't want to split tunneling. Here is the sketch of the testbed of the network:
DNS:210.193.2.66
|
|
Inside --------- Outside --------- -------------------
192.168.1.1 | | 202 *. *. 84 202.*. *. 1. | [ ]
---------------------- ASA |------------------------------------- GW |----------[ INTERNET ]
| | 5505. | | | [ ]
| | --------| | --------- -------------------
Host_A | 202.*. *. 83
192.168.1.5 -------------
| NetGear |
| Router |
--------------
| 192.168.2.1.
|
|
HOST_B |
Physical addr:192.168.2.2
Addr:192.168.3.1 VPNThe ASA 5505 config is as shown below:
Output from the command: 'show running-config '.
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
activate 0cMYKRmmOdVhcSr4 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 202.*. *. 84 255.255.255.128
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
inside_nat0_outbound list of allowed ip extended access any 192.168.3.0 255.255.255.224
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool vpnpool 192.168.3.1 - 192.168.3.20 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 202.128.171.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.128 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
enable client-implementation to date
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.20 inside
dhcpd dns 210.193.2.66 210.193.2.34 interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
Group Policy Reveal internal
Group Policy attributes Reveal
Protocol-tunnel-VPN IPSec
username password alice tnbrh7ICan8mnq/Y encrypted privilege 0
alice username attributes
Strategy Group-VPN-Reveal
tunnel-group Reveal type remote access
tunnel-group reveal General attributes
address vpnpool pool
Group Policy - by default-Reveal
tunnel-group show ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:bfb0083a8eb2416e9cc27befe3b224d9
: enda few thoughts
permit same-security-traffic intra-interface
NAT (outside) 1 your pool of vpn client
ASA sysopt connection permit VPN
ASA sysopt connection permit-ipsec
-
PIX VPN Basics - what the traffic is encrypted.
I understood that the CRYPTO card MATCH ADDRESS linked to the ACL command identifies the traffic is encrypted, however we have a new client with and VPN configuration operational existing that doesn't have the ADDRESS MATCH viz argument:
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto dynamic-map cisco 30 transform-set RIGHT
dynamic MyName 30-isakmp ipsec crypto map Cisco
MyName outside crypto map interface
Can someone give me an idea of how this works please? The system is a PIX515E running 6.1. (1).
The dynamic-map encryption is part of the easy VPN setup.
Read the description of the dynamic-map command encryption of the order below.
View the link below is an example of the configuration.
Hope this helps clear things up.
Steve
-
This allows the customer Cisco VPN through PIX
Hello. I seeks to allow the client VPN Cisco of LAN of the company to remote resources.
It's put PAT in place on the PIX and I'll add the following lines to the ACL in the inside interface to allow access to the customer:
permit tcp x.x.x.x y.y.y.y eq 50
permit tcp x.x.x.x y.y.y.y eq 51
permit udp x.x.x.x y.y.y.y eq 500
permit udp x.x.x.x y.y.y.y eq 4500
I have not done something like this before so I don't know if that will be enough to allow the connection of the client to remote resources.
I have to do something else to make it work?
That should be good for the local pix, but make sure that nat-traversal is enabled on the remote device.
ESP and ah protocols, not ports. 50 and 51.
esp x.x.x.x y.y.y.y permit
allowed ah x.x.x.x y.y.y.y
permit udp x.x.x.x y.y.y.y eq 500
permit udp x.x.x.x y.y.y.y eq 4500
-
Log in via the custom identity provider
Hey, I have an HTML article that will use the new setAuthToken API to provide custom user authentication, and I can call it with an authToken is allowed on the right to connect the user to the article.
However, I am having a problem to set up the custom identity provider required for this API working. I set the project settings to use a custom IdP and created a page which checks the credentials and retrieve an authToken. Now the user selects sign to from the account model a web view appears with the IDP login page. Once the user logs were can I redirect to return the authToken to the APP? I can see the https://es.publish.adobe.com/oauth2 URL in the case of the mouth, but don't see any for the Custom POI... This was again set up?
Thanks in advance,
Alex
Hi Alex,
The authentication URL should be in your generic identity provider, implemented, the page that you created to verify the credentials. When this page is launched from the Viewer, there are several query parameters that are passed with her. This includes:
redirectUri: the recall of generic URI authentication.
projectId: ID of the application project
appId: ID of the application of the observer.
appVersion: the version of the application of the observer.
UUID: the identifier of the device.
Your page should analyze the redirectUri on URL parameters and redirect it when your authentication is complete. When this redirectUri forwarding, you can include the following information in the application:
authToken: authToken to the user after the successful login.
expiresIn: optional duration in seconds before the expiration of the authToken.
error: error after the failure of the connection. Error or authToken must be specified but not both.
I hope this helps.
Thank you
Christine
-
Facing a problem with writing the custom for WLS identity assertion provider
I am facing a problem with writing the custom for WLS identity assertion provider.
Requirement:
Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
< MBeanAttribute
Name = "SupportedTypes.
Type = "java.lang.String [].
Writeable = "false".
Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
/ >
<!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
< MBeanAttribute
Name = "ActiveTypes".
Type = "java.lang.String [].
Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
/ >Problem:
Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
I did some experiments with the cookie name, to see where the problem could be
Identity asserter provider is triggered for the following cookies:
OAMAuthnCookie_blr1234567.idc.oracle.com7777.
blr1234567. IDC. Oracle
blr12_XXX. IDC. Oracle.com
and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
Tried it with giving the name of the cookie after the encoding of the colon< MBeanAttribute
Name = "SupportedTypes.
Type = "java.lang.String [].
Writeable = "false".
Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »
/ >
But still does not work
Am I missing something? Any help will be appreciated.
Help, please!colon ': ' is an illegal character in the name of the cookie.
RFC 2616, Section 2.2 says:
token = 1 *.
separators = "(" | ")" | " <" |="" "="">" | " @"
| "," | ";" | ":" | " \" |<">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
It is clear ":" a "separator" and thus not allowed in a token or a cookie name.
-
WebCenter portal with the custom identity assertion provider?
Hi all
I developed all the custom identity assertion provider that always fills a topic for weblogic without validating the token as a test.
I moved the IdA provider at the top of the list of providers. and put the flag of control for the other provider of authentication as "SUFFICIENT."
I was expecting when I access the WebCenter portal (http://webcenter.local, host: 7777 / webcenter), default login page jump the homepage appear automatically connected by the custom of IdA provider like weblogic.
But there is no tracks from the custom of IdA WC_Spaces log file provider and the default login page has been demonstrated.
Please let me know what the problem...
Thank you and best regards,
I used a phony. After that I changed the token as 'JSESSIONID', the custom of IdA provider worked well.
-
Will be vSPhere Hypervisor key will operate the custom provider OEM ISO ESXi image?
Hello
I tried to download the vSphere Hypervisor 5.5 and 6.0 towers as ISOs and start on my system, or afficheraient hard drives in the systems.
Systems are servers HP DL380 Gen9 I know are on the HCL.
Is it permissible to use a custom provider OEM image with key vSphere Hypervisor (free)? Or is it not OK to do it legally?
In other words - should I take the vSphere Hypervisor ISO and customize it by injecting appropriate inside drivers so it does not work to use the free key?
Thank you
Big_Daddy68
You can use the custom provider OEM image to build. No problems.
If you extend until vcenter and connect, it will take the new keys for him can enter your CV.
-
Issues of security in the connection between the customer and provider of flex property
Hello
I should probably know this, but the customer is concerned about a security problem. I do not think that
that is a problem, but its best to ask and be sure.
In my flex client, I got a dialog box where a user can enter a password. I then take the password
and send it to my supplier of the property. This normal text password, I don't do anything to encode it before sending
It's on. Is this ok? I think that the connection is secure, but please confirm this, or should I encode them before you send it?
Thanks for the info
Cathy
Yes, the data Manager API using secure AMF channel. Even if your plugin called java service, you must use "/.../messagebroker/amfsecure" for the channel of proxy URI as shown in the SDK examples.
-
Hello
The ASA is not my strong point. I had to make some changes to my ASA clients when the provider has changed. The ASA has been NAT would be an NTU gave us the previous provider, the new provider of the SAA is NAT had a modem. The only thing that does not work right is the VPN.
When IPSec VPN connects we cannot ping, telnet/ssh or RDP to one of imagine. My guess is that the ACL are not quite right. Could someone take a look at the config and propose something?
WAN - ASA - LAN (192.168.20.x)
I deleted the names of user and password and changed the public IP address around security.
ASA # sh run
: Saved
:
ASA Version 8.2 (5)
!
host name asa
domain afpo.local
activate the encrypted password of JCdTyvBk.ia9GKSj
d/TIM/v60pVIbiEg encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
address 192.168.20.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
PPPoE client vpdn group idnet
IP address pppoe setroute
!
banner exec *****************************************************
exec banner * SCP backup enabled *.
exec banner * SYSLOG enabled *.
banner exec *****************************************************
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.20.201
domain afpo.local
permit same-security-traffic intra-interface
object-group network GFI-SERVERS
object-network 5.11.77.0 255.255.255.0
object-network 93.57.176.0 255.255.255.0
object-network 94.186.192.0 255.255.255.0
object-network 184.36.144.0 255.255.255.0
network-object 192.67.16.0 255.255.252.0
object-network 208.43.37.0 255.255.255.0
network-object 228.70.81.0 255.255.252.0
network-object 98.98.51.176 255.255.255.240
allowed extended INCOMING tcp access list any interface outside eq https inactive
allowed extended INCOMING tcp access list any interface outside eq 987
interface of access inactive list allowed extended object-group GFI SERVERS off eq smtp tcp INBOUND
interface to access extended permitted list INCOMING tcp object-group GFI SERVERS off eq ldaps
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 10.0.0.0 255.255.0.0
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.0 255.255.255.0
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.0 255.255.255.128
IP 10.71.79.0 allow Access - list extended RITM 255.255.255.0 10.0.0.0 255.255.0.0
CLIENT_VPN list of allowed ip extended access any 172.16.0.0 255.255.255.128
Standard access list SPLIT_TUNNEL allow 10.71.79.0 255.255.255.0
Standard access list TSadmin_splitTunnelAcl allow 10.71.79.0 255.255.255.0
pager lines 24
Enable logging
logging trap information
asdm of logging of information
host of logging inside the 10.71.79.2
Within 1500 MTU
Outside 1500 MTU
local pool CLIENT_VPN_POOL 172.16.0.1 - 172.16.0.126 255.255.255.128 IP mask
local pool SSL_VPN_POOL 172.16.0.129 - 172.16.0.254 255.255.255.128 IP mask
IP verify reverse path to the outside interface
IP audit attack alarm drop action
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow 10.71.79.0 255.255.255.0 echo inside
ICMP allow any inside
ICMP allow any inaccessible outside
ICMP allow 86.84.144.144 255.255.255.240 echo outside
ICMP allow all outside
ASDM image disk0: / asdm - 645.bin
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 192.168.20.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp 10.71.79.2 smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface https 10.71.79.2 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 987 10.71.79.2 987 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps 10.71.79.2 ldaps netmask 255.255.255.255
Access-group ENTERING into the interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Serveur_RADIUS
AAA-server host 10.71.79.2 Serveur_RADIUS (inside)
key *.
RADIUS-common-pw *.
not compatible mschapv2
the ssh LOCAL console AAA authentication
Enable http server
Server of http session-timeout 60
http 0.0.0.0 0.0.0.0 inside
http 87.84.164.144 255.255.255.240 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
resetinbound of service inside interface
resetinbound of the outside service interface
Service resetoutside
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
address DYN_CLIENT_VPN 10 of the crypto dynamic-map CLIENT_VPN
Crypto dynamic-map DYN_CLIENT_VPN 10 the value transform-set ESP-AES-256-SHA ESP-3DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto IPSEC_VPN 10 card matches the address RITM
card crypto IPSEC_VPN 10 set peer 88.98.52.177
card crypto IPSEC_VPN 10 the value transform-set ESP-AES-256-SHA ESP-3DES-MD5
card crypto IPSEC_VPN 100-isakmp dynamic ipsec DYN_CLIENT_VPN
card crypto IPSEC_VPN 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
IPSEC_VPN interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 20
preshared authentication
aes-192 encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 30
preshared authentication
aes encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 40
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH enable ibou
SSH 0.0.0.0 0.0.0.0 inside
SSH 88.98.52.176 255.255.255.240 outside
SSH 175.171.144.58 255.255.255.255 outside
SSH 89.187.81.30 255.255.255.255 outside
SSH timeout 60
SSH version 2
Console timeout 30
management-access inside
VPDN group idnet request dialout pppoe
VPDN group idnet localname
VPDN group idnet ppp authentication chap
VPDN usernamepassword *. a basic threat threat detection
scanning-threat shun except ip 10.0.0.0 address threat detection 255.255.0.0
scanning-threat time shun 360 threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 130.88.202.49 prefer external source
TFTP server outside 86.84.174.157 /Aberdeen_Fishing_Producers_ (ASA5505) .config
WebVPN
port 4443
allow outside
DTLS port 4443
SVC disk0:/anyconnect-win-2.4.0202-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.4.0202-k9.pkg 2 image
Picture disk0:/anyconnect-macosx-powerpc-2.4.0202-k9.pkg 3 SVC
SVC profiles ANYCONNECT_PROFILE disk0: / AnyConnectProfile.xml
enable SVC
attributes of Group Policy DfltGrpPolicy
value of server WINS 10.71.79.2
value of server DNS 10.71.79.2
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec svc
enable IP-comp
enable PFS
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SPLIT_TUNNEL
afpo.local value by default-field
WebVPN
time to generate a new key of SVC 60
SVC generate a new method ssl key
profiles of SVC value ANYCONNECT_PROFILE
SVC request no svc default
internal TSadmin group strategy
Group Policy attributes TSadmin
value of server WINS 10.71.79.2
value of server DNS 10.71.79.2
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list TSadmin_splitTunnelAcl
afpo.local value by default-field
username password backup encrypted qwzcxbPwKZ7WiiEC privilege 15
backup attributes username
type of remote access service
admin Cg9KcOsN6Wl24jnz encrypted privilege 15 password username
attributes of user admin name
type of remote access service
tsadmin encrypted v./oXn.idbhaKhwk privilege 15 password username
R60CY/username password 7AzpFEsR ritm. O encrypted privilege 15
ritm username attributes
type of remote access service
attributes global-tunnel-group DefaultWEBVPNGroup
address SSL_VPN_POOL pool
authentication-server-group LOCAL Serveur_RADIUS
type tunnel-group RemoteVPN remote access
attributes global-tunnel-group RemoteVPN
address CLIENT_VPN_POOL pool
authentication-server-group LOCAL Serveur_RADIUS
IPSec-attributes tunnel-group RemoteVPN
pre-shared key *.
tunnel-group 87.91.52.177 type ipsec-l2l
IPSec-attributes tunnel-group 89.78.52.177
pre-shared key *.
tunnel-group TSadmin type remote access
tunnel-group TSadmin General attributes
address CLIENT_VPN_POOL pool
strategy-group-by default TSadmin
tunnel-group TSadmin ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:9ddde99467420daf7c1b8d414dd04cf3
: end
ASA #.Doug,
The nat will knit from inside to out if the LAN is 192.168.20.0 nat should be like this:
access-list SHEEP extended ip 192.168.20.0 allow 255.255.255.0 172.16.0.129 255.255.255.128
Just to get this clear you use remote VPN, you must add the 192.168.20.0 to split ACL road tunnel:
SPLIT_TUNNEL list standard access allowed 192.168.20.0 255.255.255.0
-JP-
Maybe you are looking for
-
Can I delete songs iPod 7th generation without using iTunes
CCan I remove songs from my iPod without iTunes.
-
HP pavilion p7 - 1047c: hp pavilion p7 - 1047c can be upgraded to Windows 10
I tried to upgrade the computer to Windows 10 and it got stuck. Windows support said for HP for my computer doesn't have a driver for Windows 10 and told me to talk to HP support. I can't because my machine is no longer under warranty. Can anyone hel
-
Original title: imapi. Failed to install IMAPI_XP_SRV2003_x86.exe on Win XP Pro SP3. Receive the message that is not a valid Win32 program. I downloaded the MS program two times with the same results.
-
text to burn cds on windows media player
I would like to know if it is possible to add text (the album title, artist name, song title) in the CDs that I burn on Windows Media Player.
-
How can I get the back windows of file I deleted - fwlink.asp
I have Windows XP Edition version 2002 with Service Pack 3 family. I did a virus scan. During the analysis, I deleted a file that has been damaged by a Trojan Virus. How can I get the file back. This is the microsoft file fwlink. I have lost the